A new study, published today in Nature Climate Change, suggests that – if current trends continue – food production alone will reach, if not exceed, the global targets for total greenhouse gas (GHG) emissions in 2050.
The study's authors say we should all think carefully about the food we choose and its environmental impact. A shift to healthier diets across the world is just one of a number of actions that need to be taken to avoid dangerous climate change and ensure there is enough food for all.
As populations rise and global tastes shift towards meat-heavy Western diets, increasing agricultural yields will not meet projected food demands of what is expected to be 9.6 billion people - making it necessary to bring more land into cultivation.
This will come at a high price, warn the authors, as the deforestation will increase carbon emissions as well as biodiversity loss, and increased livestock production will raise methane levels. They argue that current food demand trends must change through reducing waste and encouraging balanced diets.
If we maintain 'business as usual', say the authors, then by 2050 cropland will have expanded by 42% and fertiliser use increased sharply by 45% over 2009 levels. A further tenth of the world's pristine tropical forests would disappear over the next 35 years.
The study shows that increased deforestation, fertilizer use and livestock methane emissions are likely to cause GHG from food production to increase by almost 80%. This will put emissions from food production alone roughly equal to the target greenhouse gas emissions in 2050 for the entire global economy.
The study's authors write that halving the amount of food waste and managing demand for particularly environmentally-damaging food products by changing global diets should be key aims that, if achieved, might mitigate some of the greenhouse gases causing climate change.
"There are basic laws of biophysics that we cannot evade," said lead researcher Bojana Bajzelj from the University of Cambridge's Department of Engineering, who authored the study with colleagues from Cambridge's departments of Geography and Plant Sciences as well as the University of Aberdeen's Institute of Biological and Environmental Sciences.
"The average efficiency of livestock converting plant feed to meat is less than 3%, and as we eat more meat, more arable cultivation is turned over to producing feedstock for animals that provide meat for humans. The losses at each stage are large, and as humans globally eat more and more meat, conversion from plants to food becomes less and less efficient, driving agricultural expansion and land cover conversion, and releasing more greenhouse gases. Agricultural practices are not necessarily at fault here – but our choice of food is," said Bajzelj.
"It is imperative to find ways to achieve global food security without expanding crop or pastureland. Food production is a main driver of biodiversity loss and a large contributor to climate change and pollution, so our food choices matter."
The team analysed evidence such as land use, land suitability and agricultural biomass data to create a robust model that compares different scenarios for 2050, including scenarios based on maintaining current trends.
One scenario investigated by the team is on the supply side: the closing of 'yield gaps'. Gaps between crop yields achieved in 'best practice' farming and the actual average yields exist all over the world, but are widest in developing countries – particularly in Sub-Saharan Africa. The researchers say that closing these gaps through sustainable intensification of farming should be actively pursued.
But even with the yield gaps closed, projected food demand will still require additional land – so the impact on GHG emissions and biodiversity remains. Bajzelj points out that higher yields will also require more mineral fertiliser use and increased water demand for irrigation.
Food waste, another scenario analysed by the team, occurs at all stages in the food chain. In developing countries, poor storage and transportation cause waste; in the west, wasteful consumption is rife. "The latter is in many ways worse because the wasted food products have already undergone various transformations that require input of other resources, especially energy," said Bajzelj.
Yield gap closure alone still showed a greenhouse gas increase of just over 40% by 2050. Closing yield gaps and halving food waste still showed a small increase of 2% in greenhouse gas emissions. When healthy diets were added, the model suggests that all three measures combined result in agricultural GHG levels almost halving from their 2009 level – dropping 48%.
"Western diets are increasingly characterised by excessive consumption of food, including that of emission-intensive meat and dairy products. We tested a scenario where all countries were assumed to achieve an average balanced diet - without excessive consumption of sugars, fats, and meat products. This significantly reduced the pressures on the environment even further," said the team.
The 'average' balanced diet used in the study is a relatively achievable goal for most. For example, the figures included two 85g portions of red meat and five eggs per week, as well as a portion of poultry a day.
"This is not a radical vegetarian argument; it is an argument about eating meat in sensible amounts as part of healthy, balanced diets," said Cambridge co-author Prof Keith Richards. "Managing the demand better, for example by focusing on health education, would bring double benefits – maintaining healthy populations, and greatly reducing critical pressures on the environment."
Co-author Prof Pete Smith from the University of Aberdeen said: "unless we make some serious changes in food consumption trends, we would have to completely de-carbonise the energy and industry sectors to stay within emissions budgets that avoid dangerous climate change. That is practically impossible – so, as well as encouraging sustainable agriculture, we need to re-think what we eat."
"Cutting food waste and moderating meat consumption in more balanced diets, are the essential 'no-regrets' options," added Bajzelj.
Fred Lewsey | Eurek Alert!
Diagnoses: When Are Several Opinions Better Than One?
19.07.2016 | Max-Planck-Institut für Bildungsforschung
High in calories and low in nutrients when adolescents share pictures of food online
07.04.2016 | University of Gothenburg
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.
K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...
23.09.2016 | Event News
20.09.2016 | Event News
16.09.2016 | Event News
23.09.2016 | Life Sciences
23.09.2016 | Health and Medicine
23.09.2016 | Life Sciences