Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

In the Animal World, Bigger Isn't Necessarily Better

15.12.2008
Shocking new research shows size isn’t always an advantage in the animal world, shattering a widely-held belief that bigger is better.

Michael Kasumovic, a former University of Toronto Scarborough PhD student, examined Australian Redback male spiders to determine whether the larger ones had an edge in achieving mating success and producing offspring.

Surprisingly, Kasumovic found the large spiders didn’t always have an advantage. Instead, because the larger males experienced a much longer maturation process, they were unable to search for and mate with females and produce offspring at the same rate as the smaller Redback spiders.

“Most people assume that large size and weaponry are key indicators of a male’s fitness, because those traits help them dominate smaller males,” says Kasumovic, now a post-doctoral research fellow at the University of New South Wales. “However, smaller males develop sooner and are therefore able to mate with females before the larger males. So while large males may dominate in combat, they are unable to compete with the smaller males in terms of mate searching.”

The study, currently published online in the Journal of Evolutionary Biology, emphasized the important role maturation time plays in defining a successful male.

“Size is no longer the only ruler by which we can measure a male’s quality,” says Kasumovic. “Many other factors, including maturation time, are critical in that definition.”

For more information on the study, please contact:

Michael Kasumovic, lead author: +61-2-9385-8091 or m.kasumovic@unsw.edu.au

Maydianne Andrade, co-author: 416-287-7425 or mandrade@utsc.utoronto.ca

April Kemick | Newswise Science News
Further information:
http://www.utoronto.ca

Further reports about: Animal Redback spiders animal world smaller males

More articles from Studies and Analyses:

nachricht Real-time feedback helps save energy and water
08.02.2017 | Otto-Friedrich-Universität Bamberg

nachricht The Great Unknown: Risk-Taking Behavior in Adolescents
19.01.2017 | Max-Planck-Institut für Bildungsforschung

All articles from Studies and Analyses >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Safe glide at total engine failure with ELA-inside

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded after a glide flight with an Airbus A320 in ditching on the Hudson River. All 155 people on board were saved.

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded...

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

New pop-up strategy inspired by cuts, not folds

27.02.2017 | Materials Sciences

Sandia uses confined nanoparticles to improve hydrogen storage materials performance

27.02.2017 | Interdisciplinary Research

Decoding the genome's cryptic language

27.02.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>