Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Miniature 120-GHz Radar Sensor presented at ISSCC in San Francisco

18.02.2013
Silicon-based chip is key enabler for low-cost miniature radar at 120 GHz.

Dr. Yaoming Sun from IHP will present latest research results on millimeter-wave circuit design at 60th International Solid-State Circuits Conference (ISSCC) taking place from February 17-21 in San Francisco. The ISSCC is the most prestigious international conference devoted to the design of integrated circuits (ICs).


122-GHz Radar chip (left) and SiP (right)
IHP

IHP scientists in collaboration with the Frankfurt (Oder) based company Silicon Radar, the University of Karlsruhe and industrial partner Bosch succeeded in demonstrating for the first time a functional radar sensor with integrated antenna which transmits and receives radar signals at a frequency of 120 GHz. This allows accurate contactless measurement of short distances. The sensor was developed in the framework of the European project with the promising name SUCCESS.

At the IHP, circuit designers and technologists are working in close cooperation. In this way, the advantages of the Silicon-Germanium BiCMOS technology are exploited to develop highly complex IC’s. The main advantage of this technology is the combination of extremely fast bipolar transistors with transit frequencies in excess of 300 GHz and MOS (Metall Oxid Semiconductor) transistors on the same chip. This allows complete radar systems with dimensions of a few millimeters to be built.

The applications of this revolutionary “system in package” (SiP) are manifold. The low-cost miniature sensor systems can be used in industrial systems, security systems, and in the automotive industry. Examples are distance radar, motion detectors, shock absorber monitoring, and sensors for material characterization. In this way, the low-cost silicon-based SiP solution will help to reduce the number of accidents on our roads.

Weitere Informationen:
http://www.success-project.eu
http://www.isscc.org
http://www.ihp-microelectronics.com
http://www.siliconradar.com
http://www.kit.edu
http://www.bosch.com

Heidrun Förster | idw
Further information:
http://www.ihp-microelectronics.com/

More articles from Trade Fair News:

nachricht Complex hardmetal tools out of the 3D printer
21.09.2016 | Fraunhofer-Institut für Keramische Technologien und Systeme IKTS

nachricht Launch of New Industry Working Group for Process Control in Laser Material Processing
20.09.2016 | Fraunhofer-Institut für Lasertechnik ILT

All articles from Trade Fair News >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Chains of nanogold – forged with atomic precision

23.09.2016 | Life Sciences

New leukemia treatment offers hope

23.09.2016 | Health and Medicine

Self-assembled nanostructures hit their target

23.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>