Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Innovative automobile technology at the 19th World Congress on Intelligent Transport Systems

18.10.2012
Fortune Global 500 ranked Aisin Seki Co., Ltd will exhibit its latest innovative automobile technology at the 19th World Congress on Intelligent Transport Systems (ITS) in Vienna, 22 to 26 October 2012.

Aisin Seki Co., Ltd and three Aisin Group companies [1-2] will exhibit their latest innovative ITS technology at the 19th World Congress on Intelligent Transport Systems (ITS) in Vienna, at the Aisin Group booth.

The Aisin Group exhibition will introduce innovative ITS technology demonstrations and exhibits on the following themes:

- Technology for warning of immediate danger and risk during driving
- Technology to eliminate careless mistakes during driving
- Technology for protecting the safety of drivers themselves
- Touch pad operation-based GPS navigation system (exhibit)
- Technological support for environmentally friendly driving (exhibit)
In addition to demonstrations and exhibits, technical staff from the Aisin Group will present their latest research findings on the following topics:
- Universally easy-to-read color tone technology
- Technology for preventing 'wrong-way driving' (opposite direction to normal flow of traffic) on expressways.
- Obstacle avoidance braking technology

Details
The Aisin Group booth will exhibit a danger-warning and response system that monitors and evaluates a driver’s heart rate, breathing, and eyelid and face movement. If the system detects any irregular behaviour then the system automatically takes control of the vehicle, reduces its speed and brings it safely to a halt on the shoulder of the road. This system exemplifies the ‘total comprehensive power’—sensors, steering control, system integration—offered by the Aisin Group of companies at the exhibition.
Further information
[1] ADVICS CO., LTD: http://www.advics.co.jp/eng/
[2] 19th World Congress on Intelligent Transport Systems (ITS) in Vienna: http://2012.itsworldcongress.com/content
[3] Aisin Seki Co., Ltd press releases: http://aisin.com/press_archive/press_20121017.html

About Aisin Seki Co., Ltd
Aisin Seki is listed in the Fortune Global 500 as one of the largest corporations in the world. Aisin Seki produces and sells automobile parts as well as living, energy and welfare related products. The company is committed to its corporate principles that focus on putting ‘quality first’. Aisin Seki has 2 offices and 11 plants across Japan with over 90,000 employees and subsidiaries that include 69 companies in Japan and 101 overseas. As of 31 March 2012, the company’s capital was 45 billion JPY. For more information, visit http://www.aisin.com/./
Press enquiries
Aisin Seki Co., Ltd Public Relations
koho@rpr.aisin.co.jp
2-1, Asahi-machi, Kariya, Aichi, 448-8650 JAPAN
Press releases: http://aisin.com/press_archive/press_20121017.html

Adarsh Sandhu | Research asia research news
Further information:
http://www.aisin.com/
http://www.researchsea.com

More articles from Trade Fair News:

nachricht Complex hardmetal tools out of the 3D printer
21.09.2016 | Fraunhofer-Institut für Keramische Technologien und Systeme IKTS

nachricht Launch of New Industry Working Group for Process Control in Laser Material Processing
20.09.2016 | Fraunhofer-Institut für Lasertechnik ILT

All articles from Trade Fair News >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Stronger turbine blades with molybdenum silicides

26.09.2016 | Materials Sciences

Scientists Find Twisting 3-D Raceway for Electrons in Nanoscale Crystal Slices

26.09.2016 | Materials Sciences

Lowering the Heat Makes New Materials Possible While Saving Energy

26.09.2016 | Materials Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>