Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

France's wind-energy players go to Vienna for EWEA 2013

05.02.2013
EWEA will give 20 French-based companies an opportunity, under the Windustry France banner, to put their technology and innovations on display, thanks to a 300-m² national pavilion organised by UBIFRANCE, France's export-support agency, in partnership with France's Wind Energy Association (FEE) and Renewable Energy Association (SER). The EWEA trade show is the key annual event for wind-energy professionals, taking place in Vienna (Austria) from 4 to 7 February 2013.

The aim of the participating French-based groups and SMEs is to showcase their expertise in what is a growing industry, and to meet decision-makers from all over the world on the French Pavilion (Hall A, Booths E20, E30 and F20) at EWEA. The trade show is taking place between 4 and 7 February of this year in the Austrian capital.

In 2012, Europe exceeded the 100,000-MW mark in terms of power generated by wind turbines: this represented close to 7% of Europe's overall electricity consumption. Several countries have announced massive development plans for the 2013-2020 period, with Denmark (6,000 MW to be installed), Germany (50,000 MW) and Spain (40,000 MW) in the lead. These three countries have historically been at the forefront of wind-energy technology in Europe.

In France, wind-power generation that is fully connected to the grid, at 1 January 2013, exceeded 7,000 MW. France aims to supply 23% of the overall energy consumed domestically from renewable sources by 2020. For wind energy, this represents an installed capacity of 25,000 MW, made up of 19,000 MW on shore and 6,000 MW off shore. Thus, wind power alone is set to supply over 10% of France's electricity consumption by 2020.

Thanks to a host of initiatives from various regional players, the French wind-energy industry is expanding fast. Institutions such as Bourgogne Développement, Somme Développement, the Regional Council of Picardy, the International Chamber of Commerce and Industry of Picardy, the University of Picardy, and Le Havre Développement will be attending EWEA 2013 in support of their region's businesses in the wind-energy sector.

The exhibitors on the French Pavilion are listed below. Further details can be provided on request.

•AQUITAINE WIND INDUSTRY CLUSTER (Booth A E20) is the wind-energy hi-tech cluster for the south-western region of Aquitaine.

www.aquitainewindindustrycluster.com

•ASTRIUM (Booth A E20) specialises in high-performance composites used in making blades for wind turbines.

www.astrium.eads.net

•DEF (Booth A E20) is a specialist in fire-safety systems, with applications in the wind-energy sector.

www.def-online.com

•DELTA BOX (Booth A E30) specialises in designing and manufacturing air-traffic beacons.

www.delta-box.com

•ENCIS Wind (Booth A F20) specialises in wind-measurement towers. The company has also developed LED OBELUX, a night-time LED beacon solution.

www.enciswind.com

•EPSILINE (Booth A E20) provides anemometers: the company's solution facilitates local wind-speed measurements by laser in all weather conditions.

www.epsiline.com

•EPSILONE COMPOSITE (Booth A E20) is a leader in pultruded carbon-fibre shapes for a variety of sectors, including the wind-energy industry.

www.epsilon-composite.com

•ESI Group (Booth A E20) specialises in virtual-modelling solutions for the manufacturing industry, with applications in the wind-energy sector.

www.esi-group.com

•FIXATOR (Booth A F20) designs hanging platforms (for performing maintenance on wind turbines), as well as personnel lifting hoists.

www.fixator.fr

•FOURE LAGADEC (Booth A E20), a boiler-making specialist, provides elements for wind turbines (such as transition parts and towers) and maintenance services.

www.fourelagadec.com

•FRANCEOLE (Booth A E30) produces towers, internal parts, and steel parts for the foundations of wind turbines.

www.siag-group.com

•FREYSSINET (Booth A E20) has a subsidiary, FreyssiWind, which provides turnkey construction solutions for the towers and foundations of wind turbines.

www.freyssinet.com

•GRAND PORT MARITIME DE BORDEAUX (Booth A E20), the port authority for Bordeaux, manages the various port facilities in the estuary.

www.bordeaux-port.fr

•G-TEC (Booth A E20) specialises in geotechnical engineering services, as well as marine geophysical surveys and marine environmental surveys.

www.g-tec.eu

•LE HAVRE DEVELOPPEMENT (Booth A E20) is the regional economic development agency for the port of Le Havre in north-western France.

www.havre-developpement.com

•PICARDIE (Booth A E30) is the stand for the northern French region of Picardy, with delegates from CCI International, the international chapter of the chamber of commerce; the Regional Council; the Council of the Somme département; and, finally, Windustry France.

http://www.picardie.fr

•PLASTINOV (Booth A E20), through PLASTEOL, its newly formed subsidiary, offers solutions for blade inspection, using a high-tech drone system. The company makes wind-turbine blades and nacelles.

www.plastinov-composite.fr

•ROLLIX (Booth A F20) is a supplier of blade crowns and towers to the wind-energy industry, with a range going from 5-kW turbines to offshore turbines of up to 10 MW.

www.rollix.com

•SCAIME (Booth A E30) has developed optic-fibre measurement systems, which help wind-turbine manufacturers optimise the steering of their units and wind-farm operators optimise the yield and management of their arrays.

www.scaime.com

•VALOREM Group (Booth A E20) is involved in every aspect of renewable energy, from development to construction, and from technical studies to maintenance.

www.valorem-energie.com

•WIND FOR FUTURE (Booth A E30) brings together wind-energy-sector players from Burgundy (in eastern France) with those of the centre-west of France.

www.windforfuture.com

About UBIFRANCE

Together with its partners, UBIFRANCE is organising a national pavilion (Hall A, Booths E20, E30 and F20) at the EWEA trade show in Vienna (Austria), which is taking place from 4 to 7 February 2013.

For further information about EWEA, please go to: http://www.ewea.org/annual2013/

The partners of UBIFRANCE at EWEA 2013 are the French Wind Energy Association (FEE) and the French Renewable Energy Association (SER), under the Windustry France brand.

For further information about Windustry France, please go to: http://www.windustry.fr/

UBIFRANCE is the French Agency for International Business Development, and is part of France's export-support framework. As the partner of reference for French companies wishing to export, UBIFRANCE offers a complete range of services based on the provision of information concerning export markets, legal issues and regulations, as well as international finance and tenders, while also supplying sectorial data. In addition, UBIFRANCE offers export advice and targeted support to companies' commercial activities, such as exploratory visits, partnership meetings, foreign exhibitions and international press communication. Finally, UBIFRANCE runs the International Postgraduate Programme (VIE) for employing qualified personnel and young graduates outside France.

For further information about UBIFRANCE, please go to: www.ubifrance.fr

For further information, please contact :

Quote ref. : FTPB3821
Ms Katherine WOODS - Press Officer
UBIFRANCE Press Office in London
Tel: +44 (0) 207 024 3640
katherine.woods@ubifrance.fr

Katherine Woods | UBIFRANCE
Further information:
http://www.ubifrance.com/uk/

More articles from Trade Fair News:

nachricht Market innovation at glasstec 2016: VGA infrared camera for the glass industry
28.09.2016 | Optris GmbH

nachricht Complex hardmetal tools out of the 3D printer
21.09.2016 | Fraunhofer-Institut für Keramische Technologien und Systeme IKTS

All articles from Trade Fair News >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: First-Ever 3D Printed Excavator Project Advances Large-Scale Additive Manufacturing R&D

Heavy construction machinery is the focus of Oak Ridge National Laboratory’s latest advance in additive manufacturing research. With industry partners and university students, ORNL researchers are designing and producing the world’s first 3D printed excavator, a prototype that will leverage large-scale AM technologies and explore the feasibility of printing with metal alloys.

Increasing the size and speed of metal-based 3D printing techniques, using low-cost alloys like steel and aluminum, could create new industrial applications...

Im Focus: New welding process joins dissimilar sheets better

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...

Im Focus: First quantum photonic circuit with electrically driven light source

Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.

Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Call for Paper – Panacea Green Infrastructure?

30.09.2016 | Event News

HLF: From an experiment to an establishment

29.09.2016 | Event News

European Health Forum Gastein 2016 kicks off today

28.09.2016 | Event News

 
Latest News

First-Ever 3D Printed Excavator Project Advances Large-Scale Additive Manufacturing R&D

30.09.2016 | Materials Sciences

New Technique for Finding Weakness in Earth’s Crust

30.09.2016 | Earth Sciences

Cells migrate collectively by intermittent bursts of activity

30.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>