Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

AUTOMATICA 2014: Trade fair Robotic colleague that learns and thinks for itself

20.02.2014
SMErobotics demonstrates technologies for cost-effective, modular and interactive automation solutions for small and medium-sized productions.

Intelligent, cost-effective robot systems for small and medium-sized productions are designed to be intuitive and easy to operate, to learn interactively from humans and to adapt to variable production processes which are typical for small and medium-sized enterprises (SMEs).


Intuitive and efficient assembly
Fraunhofer IPA


Economically efficient welding
Fraunhofer IPA

This is the vision behind the European research project SMErobotics, which is coordinated by Fraunhofer IPA. The goal is to develop technologies for adaptive robots that are easy to use, especially by small and medium-sized businesses and their agile productions. At a joint stand at the AUTOMATICA 2014 trade fair, SMErobotics will present initial prototypes from the project in various live demonstrations.

“Optimize your production”: This year’s motto for the AUTOMATICA international trade fair for automation and mechatronics applies especially to small and medium-sized manufacturing enterprises, which, if they are to remain competitive, above all require adaptable, cost-effective automation solutions for small production runs and variable product cycles.

SMErobotics creates the technological basis for intelligent, economic robotics solutions that are quick to install and easy to use. A follow-up to the successful predecessor project SMErobot, the European research initiative develops new modular, adaptive and interactive user concepts and control systems for the efficient deployment of robots. The initiative brings together leading European robot manufacturers and research institutes.

Intelligent robot systems

The goal behind SMErobotics is to augment state-of-the-art industrial robots with cognitive capabilities. The focus, therefore, is to develop novel software functions to allow robot programs to be generated from existing production data. If any data are missing or incomplete, the aim is for the robot to obtain them from the worker. “An intelligent robot system doesn’t simply follow a once-given instruction. Instead, it learns intuitively and efficiently from its human operator - continuously improving its performance in collaboration with the worker,” says SMErobotics coordinator Martin Hägele from Fraunhofer IPA. Various exhibits will be presented in live demonstrations at AUTOMATICA 2014.

Exhibits

The robot cells on view at AUTOMATICA 2014 will showcase examples of automation solutions for a variety of industries typical of small and medium-sized enterprises:

• Intuitive and efficient assembly: Using the KUKA LBR iiwa lightweight robot in an assembly setting for small production runs, Fraunhofer IPA will demonstrate how robots can reduce the burden on humans at manual workplaces, in addition to delivering higher throughputs also when assembling tricky components.

• Economically efficient welding even in one-off production: The sensor-controlled welding robot from Reis Robotics and Fraunhofer IPA is capable of learning from the welder. Easily and quickly reprogrammable to handle new components, it draws on previous welding experience and can thus apply old knowledge to new tasks.

• Dual-armed holding and joining of components: Taking the example of welding and assembly tasks, COMAU will for the first time demonstrate how a worker can teach the “Smart Dual Arm” robot to know where to find the components and how to join them together. This enables the robot system to automatically generate the production process. Work-holding fixtures, which are typically component-specific, can largely be dispensed with.

• Easy automation: DLR and KUKA demonstrate simple and flexible automation solutions for the assembly of metal structures using the KUKA LBR iiwa lightweight robot. The shop-floor worker can “program” the assembly process by just “showing” the desired arrangement without the need for complex manual robot programming. The assembly process is automatically planned and converted into a robot program for execution. Intelligent skills based on the robot’s capabilities allow the uncertainties of a real SME environment to be addressed.

• Economically efficient “pick & place”: DTI presents a cost-effective robot cell for general manipulation tasks (e.g. “bin picking”) or for machine feeding as a “Plug’n’Produce” system for a wide range of different production processes. This allows the profitable automation of currently manually produced small batches and variable product cycles.

• Collaborative machining: Project partners Güdel and Lund University present the skills-based portability of robot programs, including both manually written and automatically generated programs, applied to both serial and parallel kinematic robots. Interoperability between the two different types of robots is demonstrated by wood-working with real-time coordination of the arms over Ethernet, with self-calibration and robot-learning functions connected to a knowledge base for continuous improvements and reuse of task specifications.

• Intuitive interfaces: Project partner fortiss presents intuitive interfaces for human-robot interaction. Based on techniques such as augmented reality and semantic knowledge, these systems can be used without the need of expert knowledge in robotics.

• Also on show will be several software applications that both ensure economically efficient use (SME-Trainer) and provide the necessary functionalities for SME-compatible robots. This includes planners that generate robot programs as well as software modules for the intelligent integration of different automation components.

European project partners
The research initiative brings together major European robot manufacturers, system integrators and leading research institutes. The partners include the leading European robot manufacturers Comau, Güdel, KUKA and Reis und the internationally renowned universities and research institutes Lund University, Sweden; DTI Danish Technological Institute, Denmark; the fortiss Institute of Technische Universität München (TUM) and the DLR Institute for robotics and mechatronics. With this network, SMErobotics has the technological know-how to deliver high-quality solutions and new innovations in the field of robotics.

SMErobotics is coordinated by Fraunhofer IPA, one of the leading institutes for applied research. With their experience of the needs of SMEs, the industrial partners in the initiative have real-world knowledge of flexible automation requirements.

SMErobotics works closely with various SMEs, which test the developed systems under practical conditions in four technology demonstrators over the course of the project. The project partners are interested in cooperating with further SMEs that wish to contribute their experience and benefit from the latest developments.

Additional information about the project partners:
Fraunhofer IPA: www.ipa.fraunhofer.de/Robotersysteme
COMAU S.p.A.: www.comau.com
DLR – Deutsches Zentrum für Luft- und Raumfahrt e.V.: www.robotic.dlr.de
DTI – Danish Technological Institute: www.dti.dk
GPS Gesellschaft für Produktionssysteme GmbH: www.gps-stuttgart.de
GÜDEL AG: www.gudel.com
KUKA Laboratories GmbH: www.kuka-labs.com
Reis GmbH & Co KG Maschinenfabrik: www.reisrobotics.de
fortiss – An-Institut der Technischen Universität München: www.fortiss.org
Lund University – ULUND: www.lth.se
SMErobotics is an EU-funded research project (grant agreement no. 287787) under the 7th EU Framework Programme (FP7/2007-2013).

Project title: “The European Robotics Initiative for Strengthening the Competitiveness of SMEs in Manufacturing by integrating aspects of cognitive systems”

Project duration: 1 January 2012 – 31 December 2015

Project coordinator
Martin Hägele
Head of Robot and Assistance Systems
Fraunhofer IPA
Nobelstr. 12
70569 Stuttgart
Phone: +49 711 970-1203
Fax: +49 711 970-1008
Email: martin.haegele@ipa.fraunhofer.de
Project secretariat
Thilo Zimmermann and Björn Kahl
GPS Gesellschaft für Produktionssysteme GmbH
Nobelstr. 12
70569 Stuttgart
Phone: +49 711 687031-42/43
Fax: +49 711 687031-55
Email: secretariat@smerobotics.org
Weitere Informationen:
Additional information about the SMErobotics initiative: http://www.smerobotics.org/
Additional information about AUTOMATICA 2014:
http://automatica-munich.com/

Jörg Walz | Fraunhofer-Institut
Further information:
http://automatica-munich.com/
http://www.ipa.fraunhofer.de

More articles from Trade Fair News:

nachricht Market innovation at glasstec 2016: VGA infrared camera for the glass industry
28.09.2016 | Optris GmbH

nachricht Complex hardmetal tools out of the 3D printer
21.09.2016 | Fraunhofer-Institut für Keramische Technologien und Systeme IKTS

All articles from Trade Fair News >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: New welding process joins dissimilar sheets better

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...

Im Focus: First quantum photonic circuit with electrically driven light source

Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.

Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

European Health Forum Gastein 2016 kicks off today

28.09.2016 | Event News

Laser use for neurosurgery and biofabrication - LaserForum 2016 focuses on medical technology

27.09.2016 | Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

 
Latest News

New imaging technique in Alzheimer’s disease - opens up possibilities for new drug development

28.09.2016 | Medical Engineering

Innovate coating extends the life of materials for industrial use

28.09.2016 | Materials Sciences

Blockchain Set to Transform the Financial Services Market

28.09.2016 | Business and Finance

VideoLinks
B2B-VideoLinks
More VideoLinks >>>