Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Preterm Birth Rate Drops Three Percent

07.04.2010
Fewer Babies Face Health Risks of an Early Birth

The nation’s preterm birth rate dropped for the second consecutive year.

New nationwide statistics show a 3 percent decline in the preterm birth rate, according to a report released today by the National Center for Health Statistics.

March of Dimes officials say they are encouraged and hope that the decline is a new trend in infant health. The data are based on 99.9 percent of U.S. births and the improvement must be confirmed in the final data.

“We’re beginning to see the benefits of years of hard work by the March of Dimes and its partners. This decline, although small, is heartening,” said Dr. Jennifer L. Howse, president of the March of Dimes. “It means about 14,000 babies were spared the health risks of an early birth. We hope that this is just the beginning of what’s possible, and that efforts such as health care reform and our programs to make women and their doctors aware of things they can do to lower the risk of a preterm birth will continue to bear fruit in years to come.”

The preterm birth rate dropped to 12.3 percent, according to the report, “Births: Preliminary Data for 2008,” which was released today by the National Center for Heath Statistics. That’s down from the 2007 preliminary rate of 12.7 percent. The declines follow a more than 20 percent increase in the preterm birth rate between 1990 and 2006.

Premature birth is a serious and costly problem, the March of Dimes says. Even with the decline in the preterm birth rate, more than a half million babies are born too soon in the United States each year, costing the nation more than $26 billion annually. Babies who survive an early birth often face lifelong health challenges, including cerebral palsy, blindness, hearing loss, learning disabilities, and other chronic conditions. Even infants born “late preterm” – between 34 and 36 weeks gestation – have a greater risk of re-hospitalization, breathing problems, feeding difficulties, temperature instability (hypothermia), jaundice, delayed brain development and learning problems.

The March of Dimes says 79 percent of the decline in the preterm birth rate occurred among late preterm babies.

There are known strategies that can lower the risk of an early birth -- such as smoking cessation programs, progesterone treatments for women with a history of preterm birth, avoiding multiples from fertility treatments and avoiding unnecessary c-sections and inductions before 39 weeks.

The March of Dimes is the leading nonprofit organization for pregnancy and baby health. With chapters nationwide and its premier event, March for Babies®, the March of Dimes works to improve the health of babies by preventing birth defects, premature birth and infant mortality. The March for Babies is sponsored nationally by the March of Dimes number one corporate supporter Kmart, Farmers Insurance Group, CIGNA, Continental Airlines, Famous Footwear, FedEx, sanofi pasteur, First Response, and Mission Pharmacal. To join an event near you, visit marchforbabies.org. For more information, go to the March of Dimes Web site at marchofdimes.com or its Spanish language Web site at nacersano.org.

Elizabeth Lynch | EurekAlert!
Further information:
http://www.marchofdimes.com

More articles from Statistics:

nachricht Institutions of higher education spent more than Euro 48 billion in 2014
19.05.2016 | Statistisches Bundesamt

nachricht Microtechnology industry keen to invest and innovate
07.04.2016 | IVAM Fachverband für Mikrotechnik

All articles from Statistics >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Custom-tailored strategy against glioblastomas

26.09.2016 | Health and Medicine

Cooling buildings with solar heat

26.09.2016 | Power and Electrical Engineering

Chains of nanogold – forged with atomic precision

23.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>