Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

New research explores ’early bird’ and ’night owl’ sleep patterns

19.04.2004


An animal study finds a link in genetics that determines our sleep patterns



Are you annoyed by cheerful "morning people?" Do you ever wonder how "night owls" can keep going? Most of us ask these questions because we are in between these two extremes, and take a while to get going early in the morning and tire long before midnight. This entire spectrum reflects the broad, normal variation in sleep patterns in humans that is rooted in the very genetic foundations of how our body works. Because these variations occur within our population and differ with age, the presumption exists that the differences in sleep patterns are controlled by complex mechanisms with contributions from multiple genes and influenced by environmental factors.

Linking our genetic make-up and sleep related disorders require data that compare genetic differences that might explain the basis of sleep disorders. Knowing what causes these disorders is important -- getting a good night sleep is now a challenge for some 50 to 70 millions American of all ages. A 2002 National Sleep Foundation annual survey reported that nearly 40 percent of adults 30 to 64 years old, and 44 percent of those age 18 to 29, reported that daytime sleepiness is so severe that it interferes with work and social functioning at least a few days each month. Excessive daytime sleepiness has been blamed on interference in cognitive functioning, motor vehicle crashes (especially at night), poor job performance and reduced productivity. While researchers have learned much about the basic mechanism underlying the control of sleep and its importance on our daily function and health, they have only just begun to examine the complex genetic and environmental interactions that shape sleep and health.


A New Study

An important step in this research is a new study that involved three different strains of inbred laboratory rats and measurements of their movement and continuous sleep in controlled environmental chambers for three days and nights. The study examined 24-hour variations in the animals’ slow wave sleep, activity and changes from rest to activity. The comparisons between the three strains have led the researchers to conclude that there were significant variations in these measures, strongly suggesting that the findings were due to genetic differences.

The authors of "Circadian Slow Wave Sleep and Movement Behavior are under Genetic Control in Inbred Strains of Rat," are Thom R. Feroah, Todd Sleeper, Dan Brozoski, Joan Forder, Tom B. Rice, and Hubert V. Forster from the Medical College of Wisconsin, Milwaukee, WI. Dr. Feroah will present his team’s findings at the American Physiological Society’s (APS) (www.the-aps.org) annual scientific conference, Experimental Biology 2004, being held April 17-21, 2004, at the Washington, D.C. Convention Center.

Methodology

Research in inbred strains of mice has previously shown distinct variations in the pattern of slow wave sleep between some strains. This study investigated differences in circadian slow wave sleep and activity patterns in three inbred strains of rats previously used in sequencing the rat genome. If a difference in the pattern of slow wave sleep and activity was found, then a dissection of the multigenic basis of the neurophysiological mechanisms involved in the control of slow wave sleep and behavior could then be explored using consomic (chromosomal substitution) rat panels.

In Brown Norway (BN/mcw), Dahl Salt Sensitive (SS), and Fawn Hooded (FH) inbred rats, movement and slow wave sleep were measured continuously for three days in an environmental controlled chambers in which temperature and humidity were held within a limited operating range. Slow wave sleep was determined from electroencephalograph electrodes attached to the skull and electromyograph electrodes in the neck muscles of the rat. The percent of slow wave sleep (percent of SWS; SWS bout length relative to rest time interval), percent of rest (total rest time relative to interval time) and fragmentation of rest (Frag; calculated as the number of transitions (per hour) from a minimum six second rest period to a minimum four second period of activity) was obtained from a computerized open-field activity monitoring system that was integrated with the sleep system.

Results

Unique and significant differences were found within and between strains over the study period. The researchers found that the percentage of slow wave sleep, rest and transitions between rest and activity varied uniquely between strains. This suggests that these findings are due to genetic differences. Furthermore, the inverse relationship between the percentages of slow wave sleep and rest within strains supports the homeostatic control theory of slow wave sleep, which is to restore glycogen during non-REM sleep.

Conclusions

The next step in this research is to examine the consomic rat panels cross of FH and BN that could aid in locating the chromosome region(s) that are at the very basis of the relationship between the slow wave sleep and activity. Similarly, examining the consomic rat panel cross between the SS and FH inbred strains for the chromosomal region(s) that influence the phase shift in the circadian pattern of slow wave sleep and activity could also help understand the complex basis of the early bird and night owl pattern of sleep that is observed in our society.

This research would be important in establishing the genomic basis of normal and abnormal variation in sleep patterns. Further research into the genetic basis of these differences may very well help dissect the multigenic and physiologic mechanistic pathways involved in circadian sleep and behavior in rats that would be homologous to those in humans.


The American Physiological Society (APS) was founded in 1887 to foster basic and applied science, much of it relating to human health. The Bethesda, MD-based Society has more than 11,000 members and publishes 3,800 articles in its 14 peer-reviewed journals every year.

Editor’s Note: For further information or to schedule an interview with Dr. Feroah, please contact Donna Krupa at 703-967-2751 (cell), 703-527-7357 (office) or at djkrupa1@aol.com. Or contact the APS newsroom at 202-249-4009 between 9:00 AM and 6:00 PM EDT April 17-21, 2004.

Donna Krupa | EurekAlert!
Further information:
http://www.the-aps.org/

More articles from Social Sciences:

nachricht New population data provide insight on aging, migration
31.08.2016 | International Institute for Applied Systems Analysis (IIASA)

nachricht PRB projects world population rising 33 percent by 2050 to nearly 10 billion
25.08.2016 | Population Reference Bureau

All articles from Social Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: First quantum photonic circuit with electrically driven light source

Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.

Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

European Health Forum Gastein 2016 kicks off today

28.09.2016 | Event News

Laser use for neurosurgery and biofabrication - LaserForum 2016 focuses on medical technology

27.09.2016 | Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

 
Latest News

European Health Forum Gastein 2016 kicks off today

28.09.2016 | Event News

New switch decides between genome repair and death of cells

27.09.2016 | Life Sciences

Nanotechnology for energy materials: Electrodes like leaf veins

27.09.2016 | Physics and Astronomy

VideoLinks
B2B-VideoLinks
More VideoLinks >>>