For several years the contribution of renewable energy to worldwide electricity production has continued to expand at an incredibly rapid rate. The market for wind power installations is of particular importance and is growing not only in Germany but also in many other countries where significantly stronger growth has been evident in recent years.
Maintenance and repair work on wind power installations is expensive and time-consuming because of restricted accessibility. Shutdown times reduce energy output and return on investment. It is therefore essential to have a reliable and cost-effective wind turbine design, absolutely precise knowledge of operating stresses in gear units, couplings and bearing as well as dependable protection from overload situations. The issue of vibration is of particular importance here.
The urgent issue of improving the reliability and availability of large-scale wind power installations is therefore at the centre of the bilingual technology event "Drivetrains in wind power installations / Antriebsstränge in Windenergieanlagen" to be held at the Haus der Technik on 27 and 28 March 2012 in Essen, Germany.
The conference will be led by Professor Berthold Schlecht of the Institute of Machine Elements and Machine Design at the Technical University of Dresden. It will focus on basic designs for the erection and functionalities of wind power installations as well as on familiar weak points and on the resulting requirements in terms of components and sub-assemblies of the main drivetrain. Standard current design and calculation methods for bearings, couplings and gear units with spur gear and planet wheel stages, as well as gearing correction options, will be discussed. In addition, modern simulation methods (multi-body simulation (MBS) in conjunction with the finite element method (FEM)) for the determination of realistic load assumptions will be investigated, as well as the possibilities and limits of use of machine diagnostic procedures. The event will be rounded off by an examination of basic connections to the lubrication systems of drive-technical components.
Simultaneous translation from German to English (or vice-versa) will be available at the conference to meet the requirements of an international audience.To find out more about the programme of events, please contact the Haus der Technik on Tel. (+49) (0) 201/1803-344 (Sabine Gebauer), Fax (+49) (0) 201/1803-346 or look on the Internet at www.windenergie-info.de or
4th UKP-Workshop 2017 – Save the Date!
15.09.2016 | Fraunhofer-Institut für Lasertechnik ILT
Latest news around battery research
05.09.2016 | Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
28.09.2016 | Event News
27.09.2016 | Event News
23.09.2016 | Event News
28.09.2016 | Medical Engineering
28.09.2016 | Materials Sciences
28.09.2016 | Business and Finance