Lightweight construction with potential for aircraft, automobiles and ships
Laser welded interior aircraft Pins
Sketch of the process operation
Goals connected with the field of environmental protection are ambitious – and they must be. This includes saving energy by reducing fuel consumption, and related with this, reducing CO2 emissions.
This is a challenge for all industrial manufacturers, from aircraft to automobile to ship construction. In order to achieve these goals, new lightweight construction concepts based on using carbon fiber reinforced plastics (CFRP) or glass fiber reinforced plastics (GFRP) are being developed.
These materials offer not only a high potential for reducing weight, but they also have excellent mechanical properties. Thus, CFRP and GFRP are constantly becoming more and more important for industry. A good understanding of these materials combined with suitable production concepts are thus an important research topic across the globe.
LaWocs: Laser transmission welding of thermoplastic composite structures
In the last three years, the Eurostars project LaWocs „Laser transmission welding of thermoplastic composite structures“ was the first research project to investigate laser based welding of fiber reinforced materials. The goal of the project was to design a project chain from modifying the construction of components to the process, to adapting the material to the process, to optimizing the laser welding process itself.
Up to now, for example, adhesives have been used to join fiber reinforced materials, meaning the material surfaces must be intensively prepared, and a drying stage is necessary. An alternative to adhesives is mechanical joining using rivets or screws. However, this requires holes being drilled in the components, which interrupt the flow of forces along the reinforcing fibers. Laser transmission welding of thermoplastic fiber reinforced materials offers many advantages, including high flexibility, making it possible to weld complicated geometries. Furthermore, laser processing is non-tactile, i.e. forces are not applied to the workpiece.
Also, laser energy can be specifically applied only to places where a welding seam is necessary. Process control can use a non-tactile pyrometer for measuring temperatures, for example to successfully weld thermoplastic GFRP with CFRP. Thus, laser welding of composite materials can be used to simplify production processes. At the same time, this method has a high automation potential, and production with short cycle rates and high piece rates are possible, important pre-requisites for use in industrial manufacturing.
European competency all along the line
European cooperation made it possible to consider all aspects of the individual processing steps for fiber composite workpieces in one research project. Within the framework of the three year joint project, new materials were designed, which are both suitable for laser transmission welding, but still maintain good mechanical properties. Additionally, investigations on a better understanding of the welding process for different thermoplastic materials were carried out, and used for the development of the welding parameters. Thus, the project partners ELEMENT, KVE, EPL, TODS, DEVA, TENCATE, FIBRE and the LZH were able, for the first time, to synergetically implement and optimize all the subprocesses in the material and process development and component construction, including material testing.
The welding process
One of the main goals of the project was the development of a laser based process for welding fiber reinforced composite structures, and belonged to the responsibilities of the scientists in the Composites Group at the LZH. In order to carry out these welding processes, the optical characteristics of thermoplastic materials were used. They are partially transparent in the near infrared spectral range (NIR), and the correct laser radiation can be transmitted through the first welding partner.
The laser radiation is then absorbed by the carbon fibers or the soot particles in the second welding partner, and the electromagnetic radiation is transformed into heat. Due to heat conduction between both welding partners, the respective plastics melt, and a welding seam is formed. The Composites Group has developed, among other things, processes for welding low transparency fiber composite materials, including glass fiber reinforced organic plastic sheets based on a polyetherimide (PEI) structure, which can be welded up to a material thickness of 2.4 mm. Furthermore, processes have been developed to weld thermoplastic angles and braces to components made of formed organic plastic sheets.
Laser welded aircraft pins – a model for the future
Hundreds of thousands of so called aircraft pins are produced yearly for use in wide body aircraft. These pins are an example of the actual components that are in the focus of the LaWocs project. These pins are used for example to connect flooring panels to fire safety equipment and insulation material. Tests have already shown that laser welded pins have a higher strength than pins joined using adhesives, meaning that these pins can be used for weight reduction. Laser transmission welding is thus an excellent solution for fast welding of thermoplastic fiber reinforced materials. Work in this project offer an excellent foundation for the development of an automated process for the industrial manufacturing of these lightweight components, making it a resource efficient, environmentally friendly development in the transportation field.Project partners:
Michael Botts | Laser Zentrum Hannover e.V.
Further reports about: > CO2 emission > Composite & Lightweight Structures > Composites Europe > GFRP > Industrial Supply > LZH > Laser Zentrum Hannover > Synthetic Composite > Welding Distortion > glass fiber > industrial manufacturing > laser radiation > laser system > mechanical properties > production process > research project > structures > welding process
Applying electron beams to 3-D objects
23.09.2016 | Fraunhofer-Institut für Organische Elektronik, Elektronenstrahl- und Plasmatechnik FEP
New process for cell transfection in high-throughput screening
21.03.2016 | Laser Zentrum Hannover e.V.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
29.09.2016 | Event News
28.09.2016 | Event News
27.09.2016 | Event News
29.09.2016 | Materials Sciences
29.09.2016 | Materials Sciences
29.09.2016 | Interdisciplinary Research