Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Comets spread Earth-life around galaxy, say scientists

11.02.2004


If comets hitting the Earth could cause ecological disasters, including extinctions of species and climate change, they could also disperse Earth-life to the most distant parts of the Galaxy.

The "splash-back" from a large comet impact could throw material containing micro-organisms out of the planet’s atmosphere, suggest scientists from Cardiff University Centre for Astrobiology.

Although some of this outflowing material might become sterilised by heat and radiation, they believe that a significant fraction would survive. As the Earth and the Solar system go round the centre of the galaxy every 240 million years, this viable bacterial outflow would infect hundreds of millions of nascent planetary systems on the way. Hence, they suggest, the transfer of Earth life across the galaxy is inevitable.



These ideas are discussed in detail in two papers appearing in the current issue of the Monthly Notices of the Royal Astronomical Society.

The authors of the two papers are Professor Chandra Wickramasinghe and Dr Max Wallis, of the Cardiff Centre for Astrobiology, and Professor Bill Napier, an astronomer at Armagh Observatory and an Honorary Professor at Cardiff University.

Interstellar routes for transmission of micro-organisms supports the view that life may not have originated on Earth but arrived from elsewhere, strengthening the "panspermia theory" that Professor Wickramasinghe and the late Sir Fred Hoyle had been developing since 1974.

It is known that boulders and other debris may be thrown from the Earth into interplanetary space. Professor Napier finds that collisions with interplanetary dust will quickly erode the ejected boulders to much smaller fragments and that these tiny, life-bearing fragments may be driven out of the solar system by the pressure of sunlight in a few years.

The solar system could, therefore, be surrounded by an expanding ’biodisc’, 30 or more light years across, of dormant microbes preserved inside tiny rock fragments. In the course of Earth history there may have been a few dozen close encounters with star-forming nebulae, during which microbes might be injected directly into young planetary systems.

If planets capable of sustaining life are sufficiently common in the Galaxy, the Cardiff based scientists conclude that this mechanism could have infected over 10,000 million of them during the lifetime of our Galaxy.

Dr Wallis and Professor Wickramasinghe have also identified another potential delivery route. They point out that fertile Earth ejecta would, on impact, bury themselves in the radiation-shielded surface layers of frozen comets. A belt of such comets, the Edgeworth-Kuiper belt, lies beyond the planetary system. This belt gradually leaks comets into interstellar space, some of which will eventually reach proto-planetary discs and star-forming nebulae. There they are destroyed by collisions and erosion, releasing any trapped micro-organisms and seeding the formative planetary systems.


Further information:

Professor Chandra Wickramasinghe,
Centre for Astrobiology,
Cardiff University.
Tel.: 44-292-087-4201;
292-075-2146;
077-838-9243;
Email: Wickramasinghe@Cardiff.ac.uk;

Andrew Weltch | EurekAlert!
Further information:
http://www.cardiff.ac.uk/

More articles from Physics and Astronomy:

nachricht Artificial Intelligence Helps in the Discovery of New Materials
21.09.2016 | Universität Basel

nachricht Magnetic polaron imaged for the first time
19.09.2016 | Aalto University

All articles from Physics and Astronomy >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Chains of nanogold – forged with atomic precision

23.09.2016 | Life Sciences

New leukemia treatment offers hope

23.09.2016 | Health and Medicine

Self-assembled nanostructures hit their target

23.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>