A new set of simulations offer insight into this mismatch between the models and reality: the energy released by individual stars within galaxies can have a substantial effect on where matter is located in the universe.
A still image from the FIRE simulation videos, showing the gases in a galaxy. Magenta is cold molecular/atomic gas, which forms stars; green is warm ionized gas, most of which cools into a galaxy; red is 'hot' gas, which makes up the galaxy halo. Credit: Philip Hopkins/Caltech
The Feedback in Realistic Environments, or FIRE, project is the culmination of a multiyear, multiuniversity effort that—for the first time—simulates the evolution of galaxies from shortly after the Big Bang through today. The first simulation to factor in the realistic effects of stars on their galaxies, FIRE results suggest that the radiation from stars is powerful enough to push matter out of galaxies.
And this push is enough to account for the "missing" galactic mass in previous calculations, says Philip Hopkins, assistant professor of theoretical astrophysics at the California Institute of Technology (Caltech) and lead author of a paper resulting from the project."People have guessed for a long time that the 'missing physics' in these models was what we call feedback from stars," Hopkins says. "When stars form, they should have a dramatic impact on the galaxies in which they arise, through the radiation they emit, the winds they blow off of their surfaces, and their explosions as supernovae.
Previously, it has not been possible to directly follow any of these processes within a galaxy, so the earlier models simply estimated—indirectly—the impact of these effects."By incorporating the data of individual stars into whole-galaxy models, Hopkins and his colleagues can look at the actual effects of star feedback—how radiation from stars "pushes" on galactic matter—in each of the galaxies they study.
With new and improved computer codes, Hopkins and his colleagues can now focus their model on specific galaxies, using what are called zoom-in simulations. "Zoom-in simulations allow you to 'cut out' and study just the region of the universe—a few million light-years across, for example—around what's going to become the galaxy you care about," he says. "It would be crazy expensive to run simulations of the entire universe—about 50 billion light-years across—all at once, so you just pick one galaxy at a time, and you concentrate all of your resolution there."
A zoomed-in view of evolving stars within galaxies allows the researchers to see the radiation from stars and supernovae explosions blowing large amounts of material out of those galaxies. When they calculate the amount of matter lost from the galaxies during these events, that feedback from stars in the simulation accurately accounts for the low masses that have been actually observed in real galaxies. "The big thing that we are able to explain is that real galaxies are much less massive than they would be if these feedback processes weren't operating," he says.
"So if you care about the structure of a galaxy, you really need to care about star formation and supernovae—and the effect of their feedback on the galaxy."But once stars push this matter out of the galaxy, where does it go?That's a good question, Hopkins says—and one that the researchers hope to answer by combining their simulations with new observations in the coming months."Stars and supernovae seem to produce these galactic superwinds that blow material out into what we call the circum- and intergalactic medium—the space around and between galaxies. It's really timely for us because there are a lot of new observations of the gas in this intergalactic medium right now, many of them coming from Caltech," Hopkins says.
"For example, people have recently found that there are more heavy elements floating around a couple hundred thousand light-years away from a galaxy than are actually inside the galaxy itself. You can track the lost matter by finding these heavy elements; we know they are only made in the fusion in stars, so they had to be inside a galaxy at some point. This fits in with our picture and we can now actually start to map out where this stuff is going.
"Although the FIRE simulations can accurately account for the low mass of small- to average-size galaxies, the physics included, as in previous models, can't explain all of the missing mass in very large galaxies—like those larger than our Milky Way. Hopkins and his colleagues have hypothesized that black holes at the centers of these large galaxies might release enough energy to push out the rest of the matter not blown out by stars.
"The next step for the simulations is accounting for the energy from black holes that we've mostly ignored for now," he says.The information provided by the FIRE simulations shows that feedback from stars can alter the growth and history of galaxies in a much more dramatic way than anyone had previously anticipated, Hopkins says. "We've just begun to explore these new surprises, but we hope that these new tools will enable us to study a whole host of open questions in the field."These results were submitted to the Monthly Notices of the Royal Astronomical Society on November 8, 2013 in a paper titled "Galaxies on FIRE (Feedback In Realistic Environments):
Stellar Feedback Explains Cosmologically Inefficient Star Formation." In addition to Hopkins, other authors on the paper include Duìan Kereì, UC San Diego; José Oñorbe and James S. Bullock, UC Irvine; Claude-André Faucher-Giguère, Northwestern University; Eliot Quataert, UC Berkeley; and Norman Murray, the Canadian Institute for Theoretical Astrophysics. Hopkins's work was funded by the National Science Foundation and a NASA Einstein Postdoctoral Fellowship, as well as the Gordon and Betty Moore Foundation.
Jessica Stoller-Conrad | EurekAlert!
Australian technology installed on world’s largest single-dish radio telescope
26.09.2016 | International Centre for Radio Astronomy Research (ICRAR)
How to merge two black holes in a simple way
26.09.2016 | Plataforma SINC
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.
K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...
23.09.2016 | Event News
20.09.2016 | Event News
16.09.2016 | Event News
26.09.2016 | Materials Sciences
26.09.2016 | Materials Sciences
26.09.2016 | Materials Sciences