Ten asteroids have been located to date that at least at one moment have displayed a trail like that of comets. They are named main-belt comets (MBC) as they have a typical asteroidal orbit but display a trail at the same time. This means that their dust (and possibly gas) emission activity is like comets.
This is an artistic representation of asteroid P/2012 F5. Credit: SINC
One of these objects, baptised as P/2012 F5 (Gibbs), was discovered in March 2012 from the Mount Lemmon Observatory in Arizona (USA). In May and June of that year, Spanish astrophysicists from the Gran Telescopio Canarias tracked it and have discovered when the trail was born using mathematic calculations.
"Our models indicate that it was caused by an impulsive short-lived event lasting just a few hours around the 1st July, 2011, with an uncertainty of 20 days," as explained to SINC by Fernando Moreno, researcher at the Astrophysics Institute of Andalusia (CSIC). In collaboration with other colleagues from the Astrophysics Institute of the Canary Islands and the University of La Laguna, the data have been published in the 'The Astrophysical Journal Letters'.
The telescope images reveal "a fine and elongated dust structure that coincides exactly with the synchrone of that day," says Moreno. For a given observation date, a synchrone is the position in the sky of the particles emitted from these types of objects with zero speed in an instant of time. In this case the synchrone of the 1st July, 2011 is the best adapted to the fine trail.
The width and varying brightness of the head to the end of the trail allowed for the researchers to deduce the physical properties of the particles and proportions of their different sizes.
As for the maximum size and speed values of the liberated particles, the team has calculated that the asteroid should have a radius of between 100 m and 150 m and the dust mass emitted should be about half a million tonnes.
Moreno indicates that, from the brightness distribution of the trail, "we have verified that the dependence of the speed of particle ejection on size is very weak, in accordance with what we already obtained for the other asteroid of this group: 596 Scheila, which probably suffered a collision."
MBC activated asteroids
MBCs are main-belt asteroids situated at a distance of between 2 and 3.2 astronomical units, which is the average distance between the Earth and the Sun. For some reason they become active and emit dust. For now they have not been found to generate gas but this could be due to the fact that they are weak at the very moment of observation.
Since the first discovery of an MBC in 1996, the 133P/Elst-Pizarro, a total of ten have now been found. The presence of a trail in some has lasted for a relatively long period of a few months, like in the cases of 2006 VW139 and P/2010 R2 (La Sagra). The latter was discovered from an observatory of the same name in Granada. Its activity could have been due to an ice sublimation which could have released the gas, although this has not been detected.In other cases, however, activity developed during a short period of time, like in the case of 596 Scheila. Its dust cloud dissipated very quickly in a matter of hardly three or four weeks following its detection.
In the case of P/2012 F5, it is still unknown what group it belongs to. More data will be available when it can be observed again in good conditions next year in around July or August 2014.
The last documented MBC to date is the so-called P/2012 T1 (PANSTARRS), which Spanish astrophysicist are also analysing. Like what has happened with exoplanets, many more main-belt comets will start appearing in the coming years.
Fernando Moreno, Javier Licandro, Antonio Cabrera-Lavers. "A short-duration event as the cause of dust ejection from Main-Belt Comet P/2012 F5 (Gibbs)". The Astrophysical Journal Letters 761 (1), December 2012. Doi: 10.1088/2041-8205/761/1/L12.
SINC | EurekAlert!
Artificial Intelligence Helps in the Discovery of New Materials
21.09.2016 | Universität Basel
Magnetic polaron imaged for the first time
19.09.2016 | Aalto University
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.
K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...
23.09.2016 | Event News
20.09.2016 | Event News
16.09.2016 | Event News
23.09.2016 | Life Sciences
23.09.2016 | Health and Medicine
23.09.2016 | Life Sciences