These findings may point researchers toward the development of a single vaccine that protects against members of an entire family of bacteria that cause disease in humans, domestic animals and livestock.
Survival for many bacteria is dependent on their ability to invade human or animal cells. And it needs to be done in a very precise fashion. Bacteria use a specific set of “keys” on their surfaces to unlock specific “doors,” or entryways into their host cells.
By understanding how these bacteria invade cells, researchers are able to identify potential targets to block the spread of infection, and from there, develop safe and effective vaccines.
In the study, now published online and appearing in the November (Volume 80, Issue 11) issue of the journal Infection and Immunity, a journal of the American Society for Microbiology, researchers reported that a protein called OmpA on the surface of Anaplasma phagocytophilum is important for invading host cells. Anaplasma phagocytophilum is an Anaplasmataceae bacterium that infects humans to cause granulocytic anaplasmosis. It is the second most common tick-transmitted disease after Lyme disease in the United States, and it also is found in Europe and Asia.
The team also identified the particular sugar residue on the surfaces of host cells to which OmpA binds.
“In other words, we identified both a key and door that together promote Anaplasma phagocytophilum infection,” said lead investigator Jason A. Carlyon, Ph.D., associate professor and a George and Lavinia Blick Scholar in the Department of Microbiology and Immunology in the VCU School of Medicine.
“These findings are important because our data also establish a direction for development of a single vaccine that protects against members of an entire family of bacteria that cause disease in humans, domestic animals and livestock,” he said.
According to Carlyon, the region of OmpA that mediates infection is shared among other Anaplasmataceae bacteria.
Experts have seen a steady rise in the incidence of human infections caused by tick-transmitted bacterial pathogens in the past several years. Many tick-transmitted bacterial pathogens are considered “emerging pathogens” because it was only recently discovered that they infect humans. Moreover, evidence suggests that many of these infections go unrecognized, signifying that the prevalence of human diseases caused by Anaplasmataceae pathogens is even higher, said Carlyon. Livestock infections carry a significant economic burden, costing the U.S. cattle industry $100 million per year, he added.
Researchers in Carlyon’s lab are presently refining their understanding of how OmpA promotes infection and testing its efficacy in protecting against infection by A. phagocytophilum and other Anaplasmataceae members.
The findings of the VCU-led study were also highlighted in a commentary that appeared in the same issue of the journal, authored by two experts in the field, including Guy H. Palmer, DVM, Ph.D., director, Creighton chair and Regents professor in the Paul G. Allen School for Global Animal Health at the Washington State University College of Veterinary Medicine, and Susan M. Noh, Ph.D., also with Washington State University College of Veterinary Medicine.
For this work, VCU has filed a patent. At this time, U.S. and foreign rights are available, and the team is seeking commercial partners to further develop this technology.
Carlyon collaborated with VCU School of Medicine researchers Nore Ojogun, Ph.D.; Amandeep Kahlon, Ph.D.; Matthew J. Troese, Ph.D.; and Rachael J. Thomas, Ph.D., all former postdoctoral fellows in the VCU Department of Microbiology and Immunology and Carlyon’s lab; Stephanie A. Ragland, former laboratory technician in the VCU Department of Microbiology and Immunology; Lauren VieBrock, graduate student in the VCU Department of Microbiology and Immunology, both also in Carlyon’s lab; Juliana E. Masttronunzio, Ph.D., postdoctoral fellow in the Yale University School of Medicine, and Erol Fikrig, M.D., Waldemar Von Zedtwitz professor of medicine and epidemiology and microbial pathogenesis in the Yale University School of Medicine, and investigator with Howard Hughes Medical Institute, and section chief of infectious diseases; and Naomi J. Walker, technician with the University of California School of Veterinary Medicine, and Dori L. Borjesson, Ph.D., professor from the University of California School of Veterinary Medicine.
This study was supported by a grant from the National Institutes of Health grants R01 AI072683, R01AI072683-04S1, and R21 AI090170 (to Carlyon) and R01 AI141440 (to Fikrig). The VCU Flow Cytometry and Imaging Shared Resource Facility is supported, in part, by funding from NIH-NCI Cancer Center Support Grant 5 P30 CA016059.
Read the abstract here: http://iai.asm.org/content/80/11/3748.abstract?etoc
EDITOR’S NOTE: A copy of the study is available for reporters by contacting the journal’s communications office at 202.737.3600 or email@example.com.
About VCU and the VCU Medical Center: Virginia Commonwealth University is a major, urban public research university with national and international rankings in sponsored research. Located in downtown Richmond, VCU enrolls more than 31,000 students in 222 degree and certificate programs in the arts, sciences and humanities. Sixty-six of the programs are unique in Virginia, many of them crossing the disciplines of VCU’s 13 schools and one college. MCV Hospitals and the health sciences schools of Virginia Commonwealth University compose the VCU Medical Center, one of the nation’s leading academic medical centers.
Sathya Achia Abraham | Newswise Science News
Custom-tailored strategy against glioblastomas
26.09.2016 | Rheinische Friedrich-Wilhelms-Universität Bonn
New leukemia treatment offers hope
23.09.2016 | King Abdullah University of Science and Technology
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
29.09.2016 | Event News
28.09.2016 | Event News
27.09.2016 | Event News
29.09.2016 | Materials Sciences
29.09.2016 | Materials Sciences
29.09.2016 | Interdisciplinary Research