Beginning to take folic acid supplements later in pregnancy did not reduce the risk. This is shown in new findings from the ABC Study and Norwegian Mother and Child Cohort Study published in the Journal of The American Medical Association (JAMA).
Women who took folic acid supplements from four weeks before conception to eight weeks into pregnancy had a 40 per cent lower risk of giving birth to children with childhood autism (classic autism). Use of folic acid supplements midway through pregnancy (week 22) had no effect.
The findings only apply to a lower risk of childhood autism, the most severe form of autism. The results show no reduction in the risk of atypical or unspecific autism. The study also investigated the prevalence of Asperger syndrome, but the number of examined children was too low to give a reliable result.
Food and other supplements did not reduce riskThe researchers found no connection between childhood autism and intake of other supplements during pregnancy. They also found no correlation with maternal intake of folate through food.
“It appears that the reduced risk of childhood autism only reflects folic acid supplements, not food or other supplements, and that the crucial time interval is from four weeks before conception to eight weeks into pregnancy,” says Dr Pål Surén, primary author of the paper and researcher at the Norwegian Institute of Public Health.
Clear results that pave the way for further research
The results show an association between the use of folic acid supplements in the mother during pregnancy and a reduced risk of childhood autism.
“The study does not prove that folic acid supplements can prevent childhood autism. However, the findings are so apparent that they constitute a good argument to further examine possible causal mechanisms. It should also be ascertained whether folic acid is associated with a reduced risk of other brain disorders in children,” says Surén.
Emphasises the importance of folic acid supplements
The results support the Norwegian Directorate of Health’s recommendations for folic acid supplements during pregnancy and emphasise the importance of starting early - preferably before conception.
The ABC Study included participants in the Norwegian Mother and Child Cohort Study (MoBa) who were born in 2002-2008, and included a total of 85,176 children. The mothers had given detailed information about their diet and the use of supplements in early pregnancy. Children with autism diagnoses in MoBa were identified through questionnaires, referrals from parents and health personnel and through links to the Norwegian Patient Register. When the analyses were done, 270 children with autism diagnoses were identified in the study population. Of these children, 114 children had autism, 56 had Asperger syndrome and 100 had atypical or unspecified autism.
The use of folic acid supplements in early pregnancy increased sharply from 2002 to 2008 among women who participated in the Norwegian Mother and Child Cohort Study. 43 per cent of mothers took folic acid supplements in 2002, while the percentage had risen to 85 per cent in 2008. However, many women began later than is desirable; only half of women who took folic acid supplements had begun before conception.Facts:
Folate is the naturally occurring form of folic acid and is found in leafy vegetables, peas, lentils, beans, eggs, yeast and liver.
For most pregnant women, folic acid supplements are required to reach the recommended levels of folate in the blood.Some countries add folic acid to flour, so that the entire population receives a supplement, but this is not done in Norway.
About the study
The ABC study is conducted by the Norwegian Institute of Public Health in collaboration with Columbia University in New York and the National Institute of Neurological Disorders and Stroke (NINDS) in Bethesda, USA. The study received funding from NINDS. In addition, funds for research analysis were provided by the Norwegian Research Council. MoBa is managed by the NIPH.
Intake of folic acid protects the developing brain and spinal cord
The Norwegian Directorate of Health recommends that women who are planning to become pregnant should take folic acid supplements from one month before conception and during the first three months of pregnancy. The recommendation is based on research showing that the use of folic acid supplements in early pregnancy protects the foetus from spina bifida and other neural tube defects.
In recent years, researchers have begun to investigate whether folic acid supplements may also have other beneficial effects on the development of the brain and spinal cord in the foetus. A study from the Norwegian Mother and Child Cohort Study showed that mothers who took folic acid supplements early in pregnancy halved the risk of having children with severe language delay at three years-old. A study of autism spectrum disorders from California found a lower risk of autism among children of expectant mothers who had taken multivitamin supplements containing folic acid.
The authors of the article are: Pål Surén, Christine Roth, Michaeline Bresnahan, Margaretha Haugen, Mady Hornig, Deborah Hirtz, Kari Kveim Lie, W. Ian Lipkin, Per Magnus, Ted Reichborn-Kjennerud, Synnve Schjølberg, George Davey Smith, Anne-Siri Øyen, Ezra Susser and Camilla Stoltenberg.
Surén P, Roth C, Bresnahan M, et al. Association between maternal use of folic acid supplements and risk of autism in children. JAMA2013, 309 (6): 570-577.
Julie Johansen | EurekAlert!
Custom-tailored strategy against glioblastomas
26.09.2016 | Rheinische Friedrich-Wilhelms-Universität Bonn
New leukemia treatment offers hope
23.09.2016 | King Abdullah University of Science and Technology
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
29.09.2016 | Event News
28.09.2016 | Event News
27.09.2016 | Event News
29.09.2016 | Materials Sciences
29.09.2016 | Materials Sciences
29.09.2016 | Interdisciplinary Research