Those have undergone extensive back surgery and need repeated X-rays to monitor their progress may soon have access to a new technology that skips the X-rays and repeated radiation exposure, opting instead for an innovative, noninvasive, non-X-ray device that evaluates spinal movement.
The technology was created and patented by two engineering undergraduate students who recently formed their own company to market the device.
The paper describing the technology appears in the current special issue of Technology and Innovation- Proceedings of the National Academy of Inventors®, and was presented at the Second Annual Conference of the National Academy of Inventors® hosted by the University of South Florida, last February 21-23, 2013.
“Surgical treatment is inevitable for some of the 80 percent of Americans who at some point in their lives suffer from back pain,” said Kerri Killen of Versor, Inc. who, along with Samantha Music, developed the new technology while they were undergraduate students at Stevens Institute of Technology in New Jersey. “We developed an evaluation device that uses battery powered sensors to evaluate spinal motion in three-dimensions. It not only reduces the amount of X-ray testing patients undergo but also has the potential to save over $5 billion per year nationwide in health care costs.”
According to co-developer Music, there are 600,000 spinal surgeries every year in the U.S. with an annual exposure of 2,250 mrem of radioactivity per patient before and after surgery. The “electrogoniometer” they developed can be used by surgeons prior to patient surgery and after surgery and also used by physical therapists to further evaluate the progression of a patient’s surgery. The technology can also be used in other orthopedic specialties to reduce both costs and eliminate X-ray exposure.
“The electrogoniometer contains three rotary potentiometers, which are three-terminal resistors with a sliding contact that forms a voltage divider to control electrical devices, such as a rheostat. Each potentiometer measures one of the three spinal movements,” explains Music. “It also contains a transducer—a device that converts a signal in one form to energy of another form—to measure the linear displacement of the spine when it curves while bending.”
The developers add that the device is “easy to use” and requires minimal training for the health professional end-user. The vest-like attachment to a patient eliminates the need for any other special equipment and can be used during a routine clinical evaluation. “It is comfortable for the patient and efficient, providing immediate and accurate results,” they add.
An additional use for the device, they said, could be for measuring movement spinal angles and could be used to determine when an injured worker might be able to return to work. By developing new ways to attach the device, different areas of the body can be evaluated for movement, whether hip, shoulder, knee, or wrist.
When Killen and Music developed the electrogoniometer in their senior design class while in undergraduate school at Stevens, they also received mentoring and assistance for establishing a small business to market the device.
Versor, Inc. is located in Cranford, New Jersey, email@example.com.
About the National Academy of Inventors
The National Academy of Inventors is a 501(c)(3) non-profit member organization comprised of U.S. and international universities, and governmental and non-profit research institutions, with over 3,000 individual inventor members and Fellows spanning more than 200 institutions, and growing rapidly. It was founded in 2010 to recognize and encourage inventors with patents issued from the U.S. Patent and Trademark Office, enhance the visibility of academic technology and innovation, encourage the disclosure of intellectual property, educate and mentor innovative students, and translate the inventions of its members to benefit society. The NAI edits the multidisciplinary journal, Technology and Innovation – Proceedings of the National Academy of Inventors, published by Cognizant Communication Corporation (NY). The editorial offices of Technology and Innovation are located at the University of South Florida Research Park, 3702 Spectrum Blvd., Suite 165, Tampa, Florida, 33612 USA. Tel: +1-813-974-1347. Email: TIJournal@research.usf.edu
News Release by Florida Science Communications
Judy Lowry | EurekAlert!
Custom-tailored strategy against glioblastomas
26.09.2016 | Rheinische Friedrich-Wilhelms-Universität Bonn
New leukemia treatment offers hope
23.09.2016 | King Abdullah University of Science and Technology
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
28.09.2016 | Event News
27.09.2016 | Event News
23.09.2016 | Event News
29.09.2016 | Physics and Astronomy
29.09.2016 | Earth Sciences
29.09.2016 | Physics and Astronomy