Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Facelift complications eased with help of new 3-D imaging technique

28.01.2014
Millions of people each year remove wrinkles, soften creases and plump up their lips by injecting a gel-like material into their facial tissue. These cosmetic procedures are sometimes called “liquid facelifts” and are said to be minimally invasive.

It’s rare, but sometimes things go wrong. In a matter of minutes, patients’ skin can turn red or blotchy white and the injected area becomes painful. Vital blood supply to the face is restricted and if untreated, parts of the tissue will die. That scenario is irreversible and can leave deep scars.


Siavash Yousefi, U of Washington

This image shows a mouse ear after a successful cosmetic filler injection. The filler, in green, rests in the tissue without blocking the blood vessels and veins.

Physicians haven’t been able to pinpoint why this happens because until now it was difficult to see how the injected fluid, or filler, behaves in facial tissue.

New imaging technology from University of Washington engineers allows scientists to analyze what happens within the smallest blood vessels during an injection. This finding could be used to prevent accidents during procedures and help clinicians reverse the ill effects if an injection doesn’t go as planned.

“Filler-induced tissue death can be a really devastating complication for the patient and provider,” said Shu-Hong (Holly) Chang, a UW assistant professor of ophthalmology specializing in plastic and reconstructive surgery. “This noninvasive imaging technique provides far better detail than I’ve ever seen before and helped us figure out why this is happening.”

Using this technology, Chang and her team saw that complications arose when filler was inadvertently injected into the bloodstream rather than in the intended soft tissues of the face. The gel builds up in a vessel, blocking blood movement and oxygen exchange. The team tested this in the ears of mice, which offer a model of what can happen in the blood vessels of a human face, Chang said.

She presented the results in November at the annual meeting of the American Society of Ophthalmic Plastic and Reconstructive Surgery showing that filler injections into blood vessels are most likely the cause of tissue death and other complications associated with the cosmetic procedure.

Ruikang Wang, a UW professor of bioengineering, and his lab pioneered this fine-resolution imaging, called optical microangiography. It can turn out 3-D images of the body’s vascular network by shining a light onto the tissue without touching it or adding any fluorescent dyes.

“We can visualize how blood responds to the cosmetic filler gel, even looking at the responses of each individual vessel. No other technique can provide this level of scrutiny,” Wang said.

The optical imaging technique operates on the same concept as ultrasound, which leverages changes in sound to detect structures. This technique instead uses light to repeatedly scan tissue cross-sections, delineating unmoving pieces (surrounding tissues) from moving segments (blood cells in vessels). Researchers compare image frames and piece together the complex visual web.

This technology can see blood vessels as small as 5 microns in diameter. Capillaries, the smallest vessels in our bodies, are about 7 microns in diameter and a red blood cell is usually 3 to 5 microns wide.

“Our niche is imaging the microvascular system,” said team member Siavash Yousefi, a UW graduate student in bioengineering. Other applications of the technology include analyzing how wounds heal, tracking what happens during strokes and traumatic brain injuries, and imaging human eyes to study diseases such as glaucoma and macular degeneration.

Cosmetic filler procedures have surged worldwide in recent years, particularly in Europe and Asia. In 2012 in the U.S. about 2 million procedures were performed. Up to 800 patients reportedly suffered serious complications, including potentially permanent disfigurement.

During the procedure, a practitioner injects the gel-like solution, often a natural substance called hyaluronic acid, multiple times into a person’s face. Restriction of blood to the tissues, called ischemia, often doesn’t show up until later, when the patient develops pain and sees changes on the surface of the skin, meaning the tissue is dying.

Some practitioners suggest using massage and warm compresses to treat the area, while others tell patients to take aspirin, but the field doesn’t have a standard course of action for treating these complications, Chang said. She has been called in for several emergencies to treat other practitioners’ patients who show signs of a failed procedure. This can lead to tissue death and even blindness if the affected area is near the eyes.

With this new understanding, practitioners can try to reverse the effect of vascular blockage by injecting an enzyme that dissolves hyaluronic acid fillers. The research team is now testing all types of available cosmetic fillers to see if their results hold on each brand and evaluating new treatments for reversing procedure complications.

“Our lab is trying to develop novel and clinically useful biomedical imaging techniques for early diagnosis, treatment and management of human diseases. Using this technology to better understand facelift complications is a perfect example that fulfills this mission,” Wang said.

The research was funded in part by the organization Research to Prevent Blindness and a Latham Vision Research Innovation Award.

For more information, contact Yousefi at siavash@uw.edu or 541-602-9592; Chang at shuchang@uw.edu or 206-897-4611; and Wang at wangrk@uw.edu or 206-616-5025.

Michelle Ma | EurekAlert!
Further information:
http://www.uw.edu

More articles from Health and Medicine:

nachricht Custom-tailored strategy against glioblastomas
26.09.2016 | Rheinische Friedrich-Wilhelms-Universität Bonn

nachricht New leukemia treatment offers hope
23.09.2016 | King Abdullah University of Science and Technology

All articles from Health and Medicine >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Stronger turbine blades with molybdenum silicides

26.09.2016 | Materials Sciences

Scientists Find Twisting 3-D Raceway for Electrons in Nanoscale Crystal Slices

26.09.2016 | Materials Sciences

Lowering the Heat Makes New Materials Possible While Saving Energy

26.09.2016 | Materials Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>