Does this sound familiar? After a long check-in procedure you are finally sitting in your assigned seat on the aircraft. But the seat is too narrow, the foot-well is too tight, you have neighbors using both armrests, and the family with small children in the row in front increases the noise level considerably.
Participants are testing the set-up at Fraunhofer IAO: using Virtual Reality they get the impression of a transparent airplane cabin.
(photo: Oliver Stefani, Fraunhofer IAO)
If only there was a way to hide the environment or perhaps even create an illusion of comfort and relaxation!
This illusion could soon become a reality, leading to a significant improvement of airline passenger comfort. Working together with seven other partners across Europe, scientists from the Max Planck Institute for Biological Cybernetics in Tübingen and the Fraunhofer Institute for Industrial Engineering IAO in Stuttgart within the project "VR Hyperspace” hope to realise this vision. This research project, which could transform airline passenger comfort, is led by The University of Nottingham in the UK.
Due to increasing passenger numbers and the limited space available in aircraft cabins, passenger comfort will be an increasingly important issue in the future. VR Hyperspace is a project in the 7th Research Framework Programme (FP7) funded by the European Commission, which explores new technologies to maintain and improve airline passenger comfort.
Recent research from neuroscience has shown that virtual reality is one amazingly easy way to produce the illusion of a different environment, or even altered body awareness. A total of nine different research institutions and industrial companies from six countries are working to develop such methods and to verify their suitability in terms of increasing passenger comfort in different application scenarios. The mixed and virtual reality technologies used range from the installation of a display in the surfaces of the cabin to complete immersion in a head-mounted display that can change both spatial and body awareness. The most promising developments of VR-Hyperspace are being integrated into the cabin of a motion simulator to put the new technologies to the test in a small space and even under extreme flight conditions, such as during turbulence.
As part of the project, Fraunhofer IAO has developed a mock-up of an aircraft cabin in which the plane’s shell can be switched to “see-through mode”. Passengers bothered by the seats in front can choose to make these transparent, too. Of course, this is possible only in a virtual sense: all the seat backrests are entirely covered in displays, with flat-screen televisions built into the floor and 14 projectors for projecting images onto the cabin walls. Effectively, the whole cabin is a display. Combined with a head tracking system, this lets passengers think they’re not in a plane but on a magic carpet! For those who are scared of heights or nervous about flying, the displays can naturally also show other scenes, such as a tropical island or a stream running through a forest. There is also something special for the business traveler who can run current Office applications on the built-in display system, all the while enjoying the (virtual) sunshine of their own private island. Initial results indicate that the scenarios developed so far enable test subjects to experience an increased level of comfort and spaciousness and feel that time flies by more quickly.
The Max Planck Institute for Biological Cybernetics tests scientific outcomes on self and space perception during in-flight motions, .i.e. turbulence. The first results using fully tracked and immersive head-mounted-displays demonstrate that one can experience presence in a larger space (i.e. a beach), experience an altered virtual body (i.e. a more comfortable posture) and that the experience of the body size influences the perception of space. The question for the final months is if these positive illusions occur under flight conditions and/or can alleviate stress caused by experiencing turbulence in-flight? For demonstration the positive illusion experiences as well as physiological and behavioral measuring technology are combined within the CyberMotion Simulator to test the practical issue of using virtual reality when experiencing in-flight conditions i.e. turbulence. The CyberMotion Simulator is a novel all-purpose motion simulator that provides scientists the unique opportunity to test future scenarios of using virtual reality in flight while observing their behavior.
Contacts:Dipl.-Ing. (FH) Juliane Segedi
UK: The University of NottinghamGermany:
Tübingen – The Max Planck Institute for Biological Cybernetics investigates fundamental perceptual and cognitive processes using experimental, theoretical and methodological approaches. Its three departments and six research groups house world-class research facilities, such as high-field brain scanners, virtual reality setups, and even a novel kind of motion simulator designed for both basic and applied research. The institute employs approximately 300 staff from over 40 countries and is located at the Max Planck Campus in Tübingen. The Max Planck Institute for Biological Cybernetics is one of 80 institutes and research facilities of the Max Planck Society for the Advancement of Science.
Nottingham – The University of Nottingham has 42,000 students and is ‘the nearest Britain has to a truly global university, with campuses in China and Malaysia modelled on a headquarters that is among the most attractive in Britain’ (Times Good University Guide 2014). It is also the most popular university in the UK among graduate employers, one of the world’s greenest universities, and winner of the Times Higher Education Award for ‘Outstanding Contribution to Sustainable Development’. It is ranked in the World's Top 75 universities by the QS World University Rankings. More than 90 per cent of research at The University of Nottingham is of international quality, according to the most recent Research Assessment Exercise. The University aims to be recognised around the world for its signature contributions, especially in global food security, energy & sustainability, and health. The University won a Queen’s Anniversary Prize for Higher and Further Education for its research into global food security. Impact: The Nottingham Campaign, its biggest ever fundraising campaign, will deliver the University’s vision to change lives, tackle global issues and shape the future.Weitere Informationen:
Juliane Segedi | Fraunhofer-Institut
Bremen University students reach the final at robotics competition with parcel delivery robot
19.10.2016 | BIBA - Bremer Institut für Produktion und Logistik
Discovering electric mobility in a playful way
18.08.2016 | Fraunhofer-Institut für Arbeitswirtschaft und Organisation IAO
Researchers from the Institute for Quantum Computing (IQC) at the University of Waterloo led the development of a new extensible wiring technique capable of controlling superconducting quantum bits, representing a significant step towards to the realization of a scalable quantum computer.
"The quantum socket is a wiring method that uses three-dimensional wires based on spring-loaded pins to address individual qubits," said Jeremy Béjanin, a PhD...
In a paper in Scientific Reports, a research team at Worcester Polytechnic Institute describes a novel light-activated phenomenon that could become the basis for applications as diverse as microscopic robotic grippers and more efficient solar cells.
A research team at Worcester Polytechnic Institute (WPI) has developed a revolutionary, light-activated semiconductor nanocomposite material that can be used...
By forcefully embedding two silicon atoms in a diamond matrix, Sandia researchers have demonstrated for the first time on a single chip all the components needed to create a quantum bridge to link quantum computers together.
"People have already built small quantum computers," says Sandia researcher Ryan Camacho. "Maybe the first useful one won't be a single giant quantum computer...
COMPAMED has become the leading international marketplace for suppliers of medical manufacturing. The trade fair, which takes place every November and is co-located to MEDICA in Dusseldorf, has been steadily growing over the past years and shows that medical technology remains a rapidly growing market.
In 2016, the joint pavilion by the IVAM Microtechnology Network, the Product Market “High-tech for Medical Devices”, will be located in Hall 8a again and will...
'Ferroelectric' materials can switch between different states of electrical polarization in response to an external electric field. This flexibility means they show promise for many applications, for example in electronic devices and computer memory. Current ferroelectric materials are highly valued for their thermal and chemical stability and rapid electro-mechanical responses, but creating a material that is scalable down to the tiny sizes needed for technologies like silicon-based semiconductors (Si-based CMOS) has proven challenging.
Now, Hiroshi Funakubo and co-workers at the Tokyo Institute of Technology, in collaboration with researchers across Japan, have conducted experiments to...
14.10.2016 | Event News
14.10.2016 | Event News
12.10.2016 | Event News
21.10.2016 | Health and Medicine
21.10.2016 | Information Technology
21.10.2016 | Materials Sciences