The test beds are being operated by the Connected Vehicle/Infrastructure University Transportation Center, a Tier 1 University Transportation Center operated by a consortium made up of the Virginia Tech Transportation Institute, the University of Virginia's Center for Transportation Studies, and Morgan State University.
Robust vehicle-to-vehicle, vehicle-to-infrastructure, and vehicle-to-device communication will enable applications addressing the U.S. Department of Transportation’s strategic goals of safety, state of good repair, economic competiveness, livable communities, and environmental sustainability.
In Northern Virginia, as you speed along Interstate 66 in Fairfax County, or move more sedately along Routes 29 and 50, you may notice large metal boxes with eggbeater-like antennae along the sides of the roads.
"The Northern Virginia test bed is a tremendous asset with respect to testing and deployment of research findings," said Center Director Tom Dingus, director of the Virginia Tech Transportation Institute. "Key elements of this test bed are strong partnerships with local agencies, including law enforcement and transit providers, particularly the Fairfax County Transit Authority."
"The Fairfax County test bed experiences the very real and significant transportation challenges in terms of congestion, safety, and environmental impact that are of concern nationwide,” said University of Virginia Consortium Leader Brian Smith, a professor and the chair of the department of civil and environmental engineering. "Through this test bed, our research team will have the opportunity to develop, test, and demonstrate tangible connected vehicles applications that will have a positive impact on the travelers’ experience."
Southwest Virginia test bed resources include Route 460 in Montgomery County for real-world testing as in Northern Virginia, and Virginia's Smart Road, a closed-circuit transportation research facility in Blacksburg where experimental procedures can be tested.
"The test beds provide a variety of roadway types, topography, and driver types that allow us to exercise connected-vehicle systems across a range of environments under controlled conditions, so that a high number of equipped vehicle interactions will occur," said Morgan State Consortium Leader Andrew Farkas, a professor and the director of the National Transportation Center.
The 55 roadside units report road hazards, optimize de-icing operations, warn of congestion and emergency vehicles, and monitor pavement condition. The instrumented vehicles, which include 10 cars, a semi-truck, and a bus, have forward-collision, road-departure, blind-spot, lane-change, and curve-speed warning system and advance geographic information systems. They also have sophisticated recording devices that download to the University Transportation Center so that researchers can observe in real-time and accumulate data for later transportation.
Test bed development and vehicle instrumentation will be finalized by the end of the year.
Research under way includes safety and human factors of adaptable stop/yield signs; connected vehicle applications for adaptive lighting; intersection management using in-vehicle speed advisory/adaptation; eco-speed control; "intelligent" awareness system for roadway workers; emergency vehicle-to-vehicle communication; connected vehicle enabled freeway merge management; infrastructure safety assessment; infrastructure pavement assessment; and connected vehicle-infrastructure application development for addressing safety and congestion issues related to public transportation, pedestrians, and bicyclists. Future research projects include optimized routing, road hazard reporting, optimized de-icing, beacon for at-risk pedestrians, and vehicle-to-vehicle communication to enhance rear signaling.
The consortium universities will conduct education and outreach programs to safely and efficiently implement successful connected vehicle and infrastructure technologies.
Gabrielle Laskey | Newswise Science News
Further reports about: > Bird Communication > Northern Lights > Transportation > Vehicle-Roadway > Vehicle-Roadway Communication > blind-spot > environmental sustainability > forward-collision > road-departure > speed|scan atlineCT-System > vehicle-to-device communication > vehicle-to-infrastructure > vehicle-to-vehicle
Discovering electric mobility in a playful way
18.08.2016 | Fraunhofer-Institut für Arbeitswirtschaft und Organisation IAO
Combating traffic congestion with advanced data analytics
17.08.2016 | Fraunhofer-Institut für Arbeitswirtschaft und Organisation IAO
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
28.09.2016 | Event News
27.09.2016 | Event News
23.09.2016 | Event News
29.09.2016 | Physics and Astronomy
29.09.2016 | Earth Sciences
29.09.2016 | Physics and Astronomy