The alcoholic content of wine has crept gradually northward in the last 10-15 years, from 12-12.5 percent to beyond 15 percent. What might sound trivial to aficionados of hard liquor is seen by some oenophiles as a disturbing trend, threatening the flavor and character of some wines. That, plus issues of public health, as well as taxes (in some countries, on alcoholic content), have created a need for approaches to lowering alcohol content.
The investigation began with a systematic screening of non-Saccharomyces yeast as a means of achieving such a reduction, says corresponding author Cristian Varela of the Australian Wine Research Institute, Adelaide, South Australia. The investigators evaluated 50 different isolates from 40 species and 24 genera for their capacity to produced wine with reduced ethanol concentration. They chose the most successful of these yeasts, Metschnikowia pulcherrima AWRI1149, for experiments in which it was set to work separately on Chardonnay and Shiraz musts.
Once the slower-growing Metschnikowia yeasts had consumed 50 percent of the sugar, S. cerevisiae were added to the mix to complete the process. This "sequential inoculation" reduced the alcohol content in Shiraz from 15 percent to 13.4 percent (and somewhat less in Chardonnay). Controls not inoculated with non-Saccharomyces strains did not produce reduced alcohol content, according to the report.
"The reduction isn't all that great, but it's in the right direction, and with more work, they might get that even lower, perhaps by letting the non-Saccharomyces yeast go longer before you throw in the Saccharomyces, says Alan Bakalinsky, of Oregon State University, Corvallis, who was not involved in the research.
This reduction in alcohol will be of great benefit to the industry says Louisa Rose, of Yalumba and Hill-Smith Family Vinyards, Angaston, South Australia, who is also a director of the Australian Wine Research Institute. "It is using techniques—sequential fermentation—that can easily be used in the winery on a commercial scale."
Previous studies investigating the effects of non-Saccharomyces yeasts on alcoholic fermentation have focused on few species and been concerned principally with the formation of the flavor compounds that might impact negatively on wine quality. None of these led to reductions in alcohol content as substantial as those he reported, says Varela.
The rise in alcohol content in wine has resulted from later harvesting of red grapes. This allows the tannins—responsible for astringency and bitterness—to soften, and in some varieties, it helps minimize the presence of off-flavors, like methoxypyrazines (green pepper/asparagus sensory notes.) But on the downside, the boost in alcohol content reduces aroma and flavor intensity, as well as otherwise impairing the oenological experience. Reducing the alcohol would enable the best of both worlds.
It would also reduce consumer costs in countries where alcohol consumption is taxed, and accede to national and international public health recommendations to lower the alcohol content of alcoholic beverages, such as wine.
A copy of the manuscript can be found online at http://bit.ly/asmtip0114f. The final version of the article is scheduled for the March 2014 issue of Applied and Environmental Microbiology.
Applied and Environmental Microbiology is a publication of the American Society for Microbiology (ASM). The ASM is the largest single life science society, composed of over 39,000 scientists and health professionals. Its mission is to advance the microbiological sciences as a vehicle for understanding life processes and to apply and communicate this knowledge for the improvement of health and environmental and economic well-being worldwide.
Jim Sliwa | EurekAlert!
Chains of nanogold – forged with atomic precision
23.09.2016 | Suomen Akatemia (Academy of Finland)
Self-assembled nanostructures hit their target
23.09.2016 | King Abdullah University of Science and Technology
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.
K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...
23.09.2016 | Event News
20.09.2016 | Event News
16.09.2016 | Event News
23.09.2016 | Life Sciences
23.09.2016 | Health and Medicine
23.09.2016 | Life Sciences