Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Screening for transformed human mesenchymal stromal cells with tumorigenic potential

30.01.2014
Researchers at Erasmus University Medical Center Rotterdam, The Netherlands, led by Dr. Qiuwei Pan and Dr. Luc van der Laan, have discovered that spontaneous tumorigenic transformation of human mesenchymal stem/stromal cells (MSCs) can occur during cell culture expansion, although the frequency is relatively low and often only observed after extensive passage in culture. This report appears in the January 2014 issue of Experimental Biology and Medicine.

Currently, MSCs are being widely investigated as a potential treatment for various diseases. According to ClinicalTrials.gov, over 350 clinical trials using MSCs have been registered by the end of 2013 (with a search of: mesenchymal stem cells).

For cell transplantation, MSCs are often isolated from either the patient or from a third party donor, and then expanded in cell culture before therapeutic application. In fact, spontaneous transformation of primary cells in cell culture has been well-investigated over decades. Malignant transformation of murine and monkey MSCs has also recently been reported.

The current study confirmed that spontaneous tumorigenic transformation of human MSCs can occur during cell culture expansion. This potentially has large implications for the clinical application of ex vivo expanded MSCs. "Although this transformation is rare, we do need to carefully examine the presence of these aberrant cells in MSC cultures, before transplanting into patients", stresses the first author Dr. Pan. "We now have identified RNA molecule signatures that can be applied as a potential biomarker for the detection of these dangerous cells in long-term cultures", said senior author Dr. van der Laan. "However, further research is required to validate this biomarker in clinical grade cultures of MSCs that are used in clinical trials".

Dr. Steven R. Goodman, Editor-in-Chief of Experimental Biology and Medicine said "This study provides a possible method for testing the safety of expanded adult stem cells. We look forward to the validation of these RNA biomarkers".

Experimental Biology and Medicine is a journal dedicated to the publication of multidisciplinary and interdisciplinary research in the biomedical sciences. The journal was first established in 1903. Experimental Biology and Medicine is the journal of the Society of Experimental Biology and Medicine. To learn about the benefits of society membership visit http://www.sebm.org. If you are interested in publishing in the journal please visit http://ebm.sagepub.com/.

Dr. Qiuwei Pan | EurekAlert!
Further information:
http://www.sebm.org

Further reports about: Experimental Biology MSC RNA adult stem cell stem cells synthetic biology

More articles from Life Sciences:

nachricht New switch decides between genome repair and death of cells
27.09.2016 | University of Cologne - Universität zu Köln

nachricht A blue stoplight to prevent runaway photosynthesis
27.09.2016 | National Institute for Basic Biology

All articles from Life Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: First quantum photonic circuit with electrically driven light source

Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.

Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Laser use for neurosurgery and biofabrication - LaserForum 2016 focuses on medical technology

27.09.2016 | Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

 
Latest News

New switch decides between genome repair and death of cells

27.09.2016 | Life Sciences

Nanotechnology for energy materials: Electrodes like leaf veins

27.09.2016 | Physics and Astronomy

‘Missing link’ found in the development of bioelectronic medicines

27.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>