In a mouse model of multiple sclerosis (MS), researchers funded by the National Institutes of Health have developed innovative technology to selectively inhibit the part of the immune system responsible for attacking myelin—the insulating material that encases nerve fibers and facilitates electrical communication between brain cells.
Autoimmune disorders occur when T-cells—a type of white blood cell within the immune system—mistake the body's own tissues for a foreign substance and attack them. Current treatment for autoimmune disorders involves the use of immunosuppressant drugs which tamp down the overall activity of the immune system. However, these medications leave patients susceptible to infections and increase their risk of cancer as the immune system's normal ability to identify and destroy aberrant cells within the body is compromised.
Supported by the National Institute of Biomedical Imaging and Bioengineering (NIBIB) at NIH, Drs. Stephen Miller and Lonnie Shea at Northwestern University, Evanston, teamed up with researchers at the University of Sydney, and the Myelin Repair Foundation in Saratoga, Calif. to come up with a novel way of repressing only the part of the immune system that causes autoimmune disorders while leaving the rest of the system intact.
The new research takes advantage of a natural safeguard employed by the body to prevent autoreactive T-cells—which recognize and have the potential to attack the body's healthy tissues—from becoming active. They report their results in the Nov. 18 online edition of Nature Biotechnology.
"We're trying to do something that interfaces with the natural processes in the body," said Shea. "The body has natural mechanisms for shutting down an immune response that is inappropriate, and we're really just looking to tap into that."
One of these natural mechanisms involves the ongoing clearance of apoptotic, or dying, cells from the body. When a cell dies, it releases chemicals that attract specific cells of the immune system called macrophages. These macrophages gobble up the dying cell and deliver it to the spleen where it presents self-antigens—tiny portions of proteins from the dying cell—to a pool of T-cells. In order to prevent autoreactive T-cells from being activated, macrophages initiate the repression of any T-cells capable of binding to the self-antigens.
Dr. Miller was the first to demonstrate that by coupling a specific self-antigen such as myelin to apoptotic cells, one could tap into this natural mechanism to suppress T-cells that would normally attack the myelin. The lab spent decades demonstrating that they could generate antigen-specific immune suppression in various animal models of autoimmune diseases. Recently, they initiated a preliminary clinical trial with collaborators in Germany to test the safety of injecting the antigen-bound apoptotic cells into patients with MS. While the trial successfully demonstrated that the injections were safe, it also highlighted a key problem with using cells as a vehicle for antigen delivery:
"Cellular therapy is extremely expensive as it needs to be carried out in a large medical center that has the capability to isolate patient's white blood cells under sterile conditions and to re-infuse those antigen-coupled cells back into the patients," said Miller. "It's a costly, difficult, and time-consuming procedure."
Thus began a collaboration with Dr. Shea, a bioengineer at Northwestern University, to discuss the possibility of developing a surrogate for the apoptotic cells. After trying out various formulations, his lab successfully linked the desired antigens to microscopic, biodegradable particles which they predicted would be taken up by circulating macrophages similar to apoptotic cells.
Much to their amazement, when tested by the Miller lab, the antigen-bound particles were just as good, if not better, at inducing T-cell tolerance in animal models of autoimmune disorders.
Using their myelin-bound particles, the researchers were able to both prevent the initiation of MS in their mouse model as well as inhibit its progression when injected immediately following the first sign of clinical symptoms.
The research team is now hoping to begin phase I clinical trials using this new technology. The material that makes up the particles has already been approved by the U.S. Food and Drug Administration and is currently used in resorbable sutures as well as in clinical trials to deliver anti-cancer agents. Miller believes that the proven safety record of these particles along with their ability to be easily produced using good manufacturing practices will make it easier to translate their discovery into clinical use.
"I think we've come up with a very potent way to induce tolerance that can be easily translated into clinical practice. We're doing everything we can now to take this forward," said Miller.
In addition to its potential use for the treatment of MS, the researchers have shown in the lab that their therapy can induce tolerance for other autoimmune diseases such as type I diabetes and specific food allergies. They also speculate that transplant patients could benefit from the treatment which has the potential to retract the body's natural immune response against a transplanted organ. Dr. Christine Kelley, NIBIB director of the Division of Science and Technology, points to the unique collaboration between scientists and engineers that made this advance a reality.
"This discovery is testimony to the importance of multidisciplinary research efforts in healthcare," said Kelley. "The combined expertise of these immunology and bioengineering researchers has resulted in a valuable new perspective on treating autoimmune disorders."
In addition to a grant from NIBIB (R01-EB013198-02), the research was also supported by NIH's National Institute of Neurological Disorders and Stroke (NS026543), the Myelin Repair Foundation, and the Juvenile Diabetes Research Foundation (17-2011-343).
NIBIB's mission is to support multidisciplinary research and research training at the crossroads of engineering and the biological and physical sciences. NIBIB supports emerging technology research and development within its internal laboratories and through grants, collaborations, and training. More information is available at the NIBIB website: http://www.nibib.nih.gov/.
NINDS is the nation's leading funder of research on the brain and nervous system. The NINDS mission is to reduce the burden of neurological disease – a burden borne by every age group, by every segment of society, by people all over the world.
About the National Institutes of Health (NIH): NIH, the nation's medical research agency, includes 27 Institutes and Centers and is a component of the U.S. Department of Health and Human Services. NIH is the primary federal agency conducting and supporting basic, clinical, and translational medical research, and is investigating the causes, treatments, and cures for both common and rare diseases. For more information about NIH and its programs, visit http://www.nih.gov.
Margot Kern | EurekAlert!
Further reports about: > Gates Foundation > NIBIB > NIH > T-cell > animal models > autoimmune disease > autoimmune disorders > blood cell > brain cell > health services > immune response > immune system > immunosuppressant drug > medical research > mouse model > multidisciplinary research > natural mechanism > white blood cell
Cells migrate collectively by intermittent bursts of activity
30.09.2016 | Aalto University
The structure of the BinAB toxin revealed: one small step for Man, a major problem for mosquitoes!
30.09.2016 | CNRS (Délégation Paris Michel-Ange)
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
30.09.2016 | Event News
29.09.2016 | Event News
28.09.2016 | Event News
30.09.2016 | Life Sciences
30.09.2016 | Life Sciences
30.09.2016 | Earth Sciences