Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Herding aphids – how ‘farmer’ ants keep control of their food

10.10.2007
Chemicals on ants’ feet tranquilise and subdue colonies of aphids, keeping them close-by as a ready source of food, says new research published today (10 October). The study throws new light on the complex relationship between ants and the colonies of aphids whose sugary secretions the ants eat.

Scientists had previously established that certain types of aphids live in colonies where they are used as a food source by a neighbouring colony of ants. The ants have been known to bite the wings off the aphids in order to stop them from getting away and depriving the ants of one of their staple foods: the sugar-rich sticky honeydew which is excreted by aphids when they eat plants.

Chemicals produced in the glands of ants can also sabotage the growth of aphid wings. The new study shows, for the first time, that ants’ chemical footprints – which are already known to be used by ants to mark out their territory - also play a key role in manipulating the aphid colony, and keeping it nearby.

The research, which was carried out by a team from Imperial College London, Royal Holloway University of London, and the University of Reading, used a digital camera and specially modified software to measure the walking speed of aphids when they were placed on filter paper that had previously been walked over by ants. The data showed that the aphids’ movement was much slower when they were on paper that had been walked on by ants, than on plain paper.

... more about:
»Food »Footprint »aphid »honeydew

Furthermore, when placed on a dead leaf, where the aphid’s instinct is to walk off in search of healthy leaves for food, the scientists found that the presence of ants significantly slowed the aphids’ dispersal from the leaf. Lead author Tom Oliver from Imperial’s Department of Life Sciences explains how ants could use this manipulation in a real-life scenario:

“We believe that ants could use the tranquillising chemicals in their footprints to maintain a populous ‘farm’ of aphids close their colony, to provide honeydew on tap. Ants have even been known to occasionally eat some of the aphids themselves, so subduing them in this way is obviously a great way to keep renewable honeydew and prey easily available.”

However, Tom points out that the relationship between the ants and the aphids might not be that straightforward: “There are some definite advantages for aphids being ‘farmed’ like this by ants for their honeydew. Ants have been documented attacking and fighting off ladybirds and other predators that have tried to eat their aphids. It’s possible that the aphids are using this chemical footprint as a way of staying within the protection of the ants.”

Professor Vincent Jansen of Royal Holloway’s School of Biological Sciences, concludes: “Although both parties benefit from the interaction, this research shows is that all is not well in the world of aphids and ants. The aphids are manipulated to their disadvantage: for aphids the ants are a dangerous liaison.”

Danielle Reeves | alfa
Further information:
http://www.imperial.ac.uk

Further reports about: Food Footprint aphid honeydew

More articles from Life Sciences:

nachricht Chains of nanogold – forged with atomic precision
23.09.2016 | Suomen Akatemia (Academy of Finland)

nachricht Self-assembled nanostructures hit their target
23.09.2016 | King Abdullah University of Science and Technology

All articles from Life Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Chains of nanogold – forged with atomic precision

23.09.2016 | Life Sciences

New leukemia treatment offers hope

23.09.2016 | Health and Medicine

Self-assembled nanostructures hit their target

23.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>