Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Birds plan for future meals

22.02.2007
New research shakes belief that forethought is unique to humans

Some birds recognise the idea of ‘future’ and plan accordingly, researchers at the University of Cambridge have discovered. According to their findings, published today in the journal Nature, western scrub-jays will store food items they believe will be in short supply in the future.

Planning for the future is a complex skill that was previously believed to be unique to humans. Other animals were perceived to be incapable of dissociating themselves from the present and any current motivation. Sometimes animals may appear to recognise future needs, but they are only exhibiting behaviours that are either instinctual (e.g. nest building) or prompted by immediate needs like hunger (e.g. food hoarding).

In order to determine whether some animals plan for future food needs or are simply acting on instinct, Professor Nicky Clayton and her team at the Department of Experimental Psychology tested the western scrub-jay.

... more about:
»Peanut »compartment »scrub-jay

Every morning, eight scrub-jays either were allowed into the compartment with ‘no breakfast’ or the compartment with ‘breakfast’. They were then allowed to eat for the rest of the day. After several days, the birds were then provided with pine nuts suitable for caching (hoarding) in the evening. In anticipation of a morning without breakfast, the scrub-jays consistently hid food in the ‘no breakfast’ compartment rather than the ‘breakfast’ compartment, demonstrating an understanding of future needs (rather than just their immediate needs).

In a similar experiment, the scrub-jays were given either dog food in one compartment or peanuts in a second compartment for breakfast. When they were allowed to cache either food where they liked in the evenings, they once again demonstrated an understanding of future needs and a desire for a varied diet by hoarding peanuts in the dog food compartment and dog kibble in the peanut compartment. If they were caching for current hunger, they would not have discriminated between the types of food or the location of the cache.

Professor Nicky Clayton said, “The western scrub-jays demonstrate behaviour that shows they are concerned both about guarding against food shortages and maximising the variety of their diets in the future. It suggests they have advanced and complex thought processes as they have a sophisticated concept of past, present and future, and factor this into their planning.”

Together with her colleague Professor Tom Dickinsons, Professor Clayton and her team have published a number of papers demonstrating the remarkable memories of scrub-jays. Some forms of memory and future thinking are believed to be linked in the human brain and the scientists were interested to see if the same might be true of the scrub-jay brain.

Genevieve Maul | EurekAlert!
Further information:
http://www.cam.ac.uk

Further reports about: Peanut compartment scrub-jay

More articles from Life Sciences:

nachricht New mechanisms uncovered explaining frost tolerance in plants
26.09.2016 | Technische Universität München

nachricht Chains of nanogold – forged with atomic precision
23.09.2016 | Suomen Akatemia (Academy of Finland)

All articles from Life Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Stronger turbine blades with molybdenum silicides

26.09.2016 | Materials Sciences

Scientists Find Twisting 3-D Raceway for Electrons in Nanoscale Crystal Slices

26.09.2016 | Materials Sciences

Lowering the Heat Makes New Materials Possible While Saving Energy

26.09.2016 | Materials Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>