Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Melbourne researchers develop safer and more effective "aspirin"

19.04.2005


Monash University researchers and staff of the Melbourne-based biotechnology company Cerylid Biosciences Ltd, have discovered and developed a new class of anti-clotting drugs that appears to be more effective than aspirin at preventing disease-causing blood clots and has fewer side effects.

Heart attack and stroke are the leading cause of death and disability in the western world and result in the death of about 50,000 Australians each year.

They are typically caused by blood clots that block blood flow to the heart or brain. Patients (except those stroke patients whose illness is caused by bleeding into the brain) are usually treated with aspirin, but this can increase the risk of bleeding and lead to life-threatening haemorrhages.



Associate Professor Shaun Jackson (pictured), from the Australian Centre for Blood Diseases at Monash, said this new class of drugs, called PI 3-kinase inhibitors, may prove to be vitally important in treating heart attack and stroke patients by stopping formation of the problem-causing blood clots without causing excessive bleeding.

"Aspirin is the most widely used anti-clotting drug , however it is only effective at preventing fatal heart attack and stroke for about one in four patients," Dr Jackson said. "There is a major need for safer and more effective anti-clotting drugs. The ’holy grail’ in the field is a drug that prevents disease-causing clots whilst not increasing the risk of bleeding."

Animal studies have shown that the drugs, developed by Dr Jackson and colleagues at the Department of Pharmacology at the University of Melbourne, Cerylid Biosciences and the University College of London, do not increase the risk of bleeding.

Phase I trials in human volunteers have also yielded promising results.

The drugs were developed after Dr Jackson and colleagues identified the mechanism that promotes the formation of pathological blood clots (clots that lead to heart attack or stroke) and how it differed from the mechanisms involved in normal blood clotting.

Their research is published today in the international journal Nature Medicine.

Dr Jackie Fairley, CEO of Cerylid Biosciences, said it was too early to say if the drugs would replace aspirin in treating heart attack and stroke but that at this stage in their development, they had enormous potential.

Commercial rights to these anti-thrombotic compounds are held by Cerylid Biosciences. The company, which holds a number of patents over the compounds and associated technology, will take its second-generation PI3-kinase inhibitor, CBL1309, into clinical trials later this year.

For more information contact: Monash University -- Ms Penny Fannin on +61 3 9905 5828 or 0417 125 700. Cerylid Biosciences -- Ms Rebecca Christie, Buchan Consulting, 0417 382 391

Penny Fannin | EurekAlert!
Further information:
http://www.monash.edu.au

More articles from Life Sciences:

nachricht Chains of nanogold – forged with atomic precision
23.09.2016 | Suomen Akatemia (Academy of Finland)

nachricht Self-assembled nanostructures hit their target
23.09.2016 | King Abdullah University of Science and Technology

All articles from Life Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Chains of nanogold – forged with atomic precision

23.09.2016 | Life Sciences

New leukemia treatment offers hope

23.09.2016 | Health and Medicine

Self-assembled nanostructures hit their target

23.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>