Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Pilot whales use synchronised swimming when they sense danger

23.11.2012
An international team of scientists have observed the behaviour of various groups of cetaceans in the Strait of Gibraltar and Cape Breton in Canada belonging to the Globicephala melas species, which are also known as long-finned pilot whales. These results show that these whales use synchronised swimming when they identify the presence of an external threat.

There are 300 pilot whales inhabiting the Straight of Gibraltar. Here these cetaceans remain throughout the entire year in the water of the Mediterranean and the Atlantic. But, little is known about their social structure.

Headed by the University of Aberdeen (United Kingdom) in collaboration with the Doñana Biological Station (CSIC) and Conservation, Information and Study on Cetaceans (CIRCE) group, the study analysed the patterns of association between individuals within this whale community. The aim was to provide a long-term vision of their social system.

"The important point is that we compared two different populations: one inhabiting the Strait of Gibraltar which is exposed to predators (boats in this case) and another with an ecotype where there are not so many boats (Cape Breton in Canada). The pilot whales are social species and we were interested in seeing how mothers teach their young, for example. We observed that they use synchronised swimming when in danger," as explained to SINC Renaud de Stephanis, researcher of the Biological Station of Doñana and coauthor of the study published in the journal Behavioural Processes.

Between 1999 and 2006 the scientists gathered samples in an area of 23,004 km in the Strait of Gibraltar and took 4,887 images of the dorsal fins of whales to compare them with those in Canada.

"They swim in complete synchrony both in the Strait of Gibraltar and Canada. When sea traffic or whale watching vessels are nearby, the whole group collectively reacts to such external stimuli. When we arrived at the watching area they were swimming at their normal rhythm but after 10 or 15 minutes near to them, the mothers and their young began to swim in a synchronised manner in alert position. This is a sign of affiliation to the group," adds the expert.

According to the researcher, these cetaceans also have a social structure formed by permanent partnerships. This means that they spend their life with the same whales and they do not interchange between different groups, as in the case of bottlenose dolphins.

Thanks to the study we now know that the presence of vessels also disturbs diving behaviour. "As such, when we began observing the whales up close, they tended to spend quite some time on the surface. However, the longer we spent nearby, the longer they stayed under water. This behavioural change could affect their energy levels, since they then have to make more of an effort to protect themselves and their young. In turn this limits hunting time, which means that they cannot feed their young properly," concludes the researcher.

Eva Rodríguez | alfa
Further information:
http://www.fecyt.es

More articles from Life Sciences:

nachricht Chains of nanogold – forged with atomic precision
23.09.2016 | Suomen Akatemia (Academy of Finland)

nachricht Self-assembled nanostructures hit their target
23.09.2016 | King Abdullah University of Science and Technology

All articles from Life Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Chains of nanogold – forged with atomic precision

23.09.2016 | Life Sciences

New leukemia treatment offers hope

23.09.2016 | Health and Medicine

Self-assembled nanostructures hit their target

23.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>