Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Discovery of sexual mating in Candida albicans could provide insights into infections

31.01.2013
Like many fungi and one-celled organisms, Candida albicans, a normally harmless microbe that can turn deadly, has long been thought to reproduce without sexual mating. But a new study by Professor Judith Berman and colleagues at the University of Minnesota and Tel Aviv University shows that C. albicans is capable of sexual reproduction.
The finding, published online by Nature January 30, represents an important breakthrough in understanding how this pathogen has been shaped by evolution, which could suggest strategies for preventing and treating the often serious infections that it causes.

The most common fungus that infects humans, C. albicans is part of the large community of microorganisms that live for the most part harmlessly within the human gut. But unlike many of its neighbors, this one-celled yeast can also cause disease, ranging from thrush (an oral infection) and vaginal yeast infections to systemic blood infections that cause organ failure and death and usually occur in people with immune defects related to HIV/AIDS, organ transplantation or chemotherapy. C. albicans is responsible for400,000 deaths annually.

Most single-celled organisms reproduce by dividing, but others reproduce asexually, parasexually or via sexual mating. Scientists have long believed that C. Albicans reproduce without mating.

Organisms that produce asexually or parasexually are diploid, which means they have two sets of chromosomes and thus can reproduce without a mate. Organisms that reproduce sexually are haploid, which means they have one set of chromosomes and need a mate to provide a second set. C. Albicans was believed to be diploid, but this study shows that the yeast is sometimes haploid, and that these haploids are capable of sexual reproduction.

Sexual reproduction fuels the evolution of higher organisms because it combines DNA from two parents to create one organism. The haploid isolates discovered in Professor Berman’s lab arise only rarely within a population, and have been detected following propagation in the lab or in a mammalian host. These haploids can mate with other haploids to generate diploid strains with new combinations of DNA, which may provide the diversity required for fungus to evolve.

The haploid C. albicans isolates also pave the way for genetic studies of the pathogen, such as the construction of "libraries" of recessive mutant strains. In addition, the ability to perform genetic crosses between haploids will help produce modified diploid strains that should help scientists better understand interactions between the fungus and its host and how it transforms from a harmless microbe into a deadly pathogen.

Berman holds appointments and has laboratories at the University of Minnesota’s College of Biological Sciences and Tel Aviv University.

The work was done in collaboration with researchers at Bowdoin College (Maine), Brown University (Rhode Island), A*STAR (Singapore) and at the Taipei Medical University (Taiwan) and was funded, in part, by the National Institutes of Health.

Matt Hodson | EurekAlert!
Further information:
http://www.umn.edu

Further reports about: C. albicans DNA Discovery albicans single-celled organism

More articles from Life Sciences:

nachricht Chains of nanogold – forged with atomic precision
23.09.2016 | Suomen Akatemia (Academy of Finland)

nachricht Self-assembled nanostructures hit their target
23.09.2016 | King Abdullah University of Science and Technology

All articles from Life Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Chains of nanogold – forged with atomic precision

23.09.2016 | Life Sciences

New leukemia treatment offers hope

23.09.2016 | Health and Medicine

Self-assembled nanostructures hit their target

23.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>