The Asian diet traditionally includes lots of raw fish and shellfish, and diners and restaurateurs are aware of the risks of food poisoning posed by contaminating bacteria.
In Korea between 2003 and 2006 around 12% of food poisoning cases were due to a type of bacteria called Vibrio, whose family includes the microbe that causes cholera. Now Korean scientists have come up with a simple and effective way of making sure that shellfish is safe - put a brass plate at the bottom of the fish tank.
"We showed that copper ions diffuse out from a brass plate into a fish tank filled with seawater, and within 40 hours the copper killed 99.99% of the Vibrio food poisoning bacteria contaminating the living fish and shellfish," says Dr Jeong-Weon Huh from the Department of Health Research, at Gyeonggi-do Institute of Health and Environment, Republic of Korea.
The copper is absorbed by the bacteria, causing them to die and fall off the gills and skin of the fish. Vibrio are even flushed from the internal organs of the fresh fish, sinking to the bottom of the tank. The remaining copper ions are absorbed from the seawater in the tank by sand and polyester filters, leaving safe, clean fish ready to be eaten by restaurant diners.
"By being able to remove the copper ions, we can prevent people from consuming excess copper themselves, but let them safely enjoy any kind of fish, either raw or cooked," says Dr Jeong-Weon Huh.
Koreans have claimed for a long time that food served in a traditional bowl called a bangzza is safer to eat. Now the food researchers have proved the science behind the myth. The 78% copper and 22% tin mixture used to make the traditional bangzza kitchenware allows enough copper ions to escape into the food that pathogenic microbes are rendered harmless.
In countries with many people suffering from poor sanitation and hygiene, where cholera and other Vibrio bacteria are rife, it seems that this traditional cookware may be a lifesaver.
"We highly recommend that brass is used in restaurant fish tanks for consumer's safety. More people will be able to safely enjoy seafood, and the marine dealers will have a stable income," says Dr Jeong-Weon Huh.
Lucy Goodchild | alfa
Chains of nanogold – forged with atomic precision
23.09.2016 | Suomen Akatemia (Academy of Finland)
Self-assembled nanostructures hit their target
23.09.2016 | King Abdullah University of Science and Technology
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.
K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...
23.09.2016 | Event News
20.09.2016 | Event News
16.09.2016 | Event News
23.09.2016 | Life Sciences
23.09.2016 | Health and Medicine
23.09.2016 | Life Sciences