Counting calories that burn through activity is a constant quandary.
One can only run on a treadmill so long, watching intently as the pedometer reads out the number of calories melted during a session of exercise. Not to mention the question of how many calories are burned through basic daily movements and even during sleep.
But technology – and youthful ambition – is presenting a round-the-clock solution for those consumed with this calculation.
A group of Georgia Tech students has crafted a device that allows individuals to constantly compute the amount of calories they burn – even as they sleep.
“It’s a completely converged device,” said Garrett Langley, 21, a senior in the School of Electrical and Computer Engineering (ECE) who spearheaded the project. “It’s a single unit that provides complete fitness monitoring and management.”
Dubbed HappyHR, the instrument is a personal monitor that allows users to measure and compare day-to-day physical and caloric activity. The name is a reference to the euphoric feeling that follows an intense round of exercise – the “happy hour.”
The small, rectangular-shaped instrument straps to the wrist or ankle, gathering data related to heart rate and exercise. The information is then transferred via Bluetooth to a PC, where the statistics can be analyzed through Web-based software.
Although the device focuses on calorie counting, Langley envisions more thorough health applications including respiratory and glucose monitoring.
This tool began as a senior design project for Langley, who viewed a marketplace that was lacking such technology coupled with a results-hungry populace eager for more health information. An aspiring entrepreneur, he also found that it provided an organic way for him to develop a business.
An avid runner, Langley himself was frustrated at the challenge of quantifying fitness results.
“I saw that there was a huge gap in the market,” he said. “There are simple $30 pedometers, and there’s nothing in between that and $400 health monitors.”
Comparatively, HappyHR should carry a $100 price tag if it becomes commercially available.
Shortly after conceiving the idea, the development process became an interdisciplinary endeavor incorporating several colleges at Georgia Tech.
Fellow electrical engineering student John Hamilton, biomedical engineering students Stephen Mann and Nathan Kumar and industrial design student Stuart Lawder all contributed their expertise to actualizing Langley’s concept.
The result: a deft and subtle device that resembles a compact MP3 player more than fitness monitoring technology.
The project, and the fortitude behind it, has impressed Steve Chaddick, Tech alumnus and chairman of the ECE Advisory Board. Chaddick has served as a mentor to Langley and his team, lending his advice to both the design and business plan process.“It’s a terrific opportunity to promote what I believe in engineering education,”
Chaddick said. “We should be teaching the ‘why’ before the ‘what,’ so to speak. It’s been very satisfying for me personally.”
Langley is finalizing the HappyHR prototype and beginning discussions with manufacturers. His goal is to make HappyHR commercially available some time this fall.
“Ideally, this could change the way America stays in shape,” Langley said. “ ’Stay fit and be happy’ is the slogan. This is going to motivate people to exercise more and be happier.”
Don Fernandez | Newswise Science News
A shampoo bottle that empties completely -- every last drop
27.06.2016 | Ohio State University
New Video Camera Released Featuring Ultra-High-Speed CMOS Image Sensor Developed At Tohoku University
11.08.2015 | Tohoku University
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
29.09.2016 | Event News
28.09.2016 | Event News
27.09.2016 | Event News
29.09.2016 | Materials Sciences
29.09.2016 | Materials Sciences
29.09.2016 | Interdisciplinary Research