Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Talking to smart homes to improve quality of life

11.01.2005


Telling your house to turn on the lights or record a TV programme may be the ultimate high-tech luxury, but for elderly and disabled people voice-operated smart homes could dramatically improve quality of life. INSPIRE has successfully tested such a system.



Based on the results of the 30-month IST programme INSPIRE project, the partners are confident that they will be able to have a commercial version of their system on the market within two years. It will be geared initially toward people with disabilities and restricted movement but also any home-owner who wants to enjoy the advantages of operating appliances and devices with speech alone.

Within the property the interactive computer system picks up voice commands from wall-mounted microphone arrays, while remote access is provided via voicemail over mobile and fixed-line communications. “One scenario could be that someone is on their way home and calls the house to turn on the heating for them, once there they can walk in the door and tell it to turn on the lights. If they wanted to watch TV they could use it to close the curtains and dim the lamps,” explains INSPIRE scientific coordinator Anastasios Tsopanoglou at KNOWLEDGE in Greece.


The system, which can be programmed to operate in any language, was tested in five pilot trials in Germany and Greece involving around 100 users. “The greatest difficulty we faced was enhancing the speech recognition technology to an acceptable level, although we managed to ensure it would recognise voice commands successfully in more than 85 per cent of cases,” Tsopanoglou says. “Users’ reactions were generally very positive, on a scale of one to seven most rated it at 5.5.”

Even so, the coordinator admits that most average users said that though the system would be a nice feature to have in their homes they did not consider it essential. “The market is not really mature enough for this technology yet for general consumers, however, there is vast potential to use it to help the elderly and disabled,” Tsopanoglou notes. “They could benefit enormously from being able to operate appliances with speech.”

The coordinator estimates that fitting a house with the system would cost approximately 10,000 euros, largely due to the need to run hundreds of cables. “That could be overcome if new houses are built with cabling pre-installed, or by using wireless technologies such as Bluetooth to interconnect devices,” Tsopanoglou says.

Tara Morris | alfa
Further information:
http://istresults.cordis.lu/

All articles from Innovative Products >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: First-Ever 3D Printed Excavator Project Advances Large-Scale Additive Manufacturing R&D

Heavy construction machinery is the focus of Oak Ridge National Laboratory’s latest advance in additive manufacturing research. With industry partners and university students, ORNL researchers are designing and producing the world’s first 3D printed excavator, a prototype that will leverage large-scale AM technologies and explore the feasibility of printing with metal alloys.

Increasing the size and speed of metal-based 3D printing techniques, using low-cost alloys like steel and aluminum, could create new industrial applications...

Im Focus: New welding process joins dissimilar sheets better

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...

Im Focus: First quantum photonic circuit with electrically driven light source

Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.

Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Call for Paper – Panacea Green Infrastructure?

30.09.2016 | Event News

HLF: From an experiment to an establishment

29.09.2016 | Event News

European Health Forum Gastein 2016 kicks off today

28.09.2016 | Event News

 
Latest News

First-Ever 3D Printed Excavator Project Advances Large-Scale Additive Manufacturing R&D

30.09.2016 | Materials Sciences

New Technique for Finding Weakness in Earth’s Crust

30.09.2016 | Earth Sciences

Cells migrate collectively by intermittent bursts of activity

30.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>