As smartphones, tablets and other gadgets become smaller and more sophisticated, the heat they generate while in use increases. This is a growing problem because it can cause the electronics inside the gadgets to fail.
Credit: Jon Bird and Jong Han.
A University at Buffalo study hints that, to make laptops and other portable electronic devices more robust, more heat might be the answer. Here, nanoconductors squeeze an electrical current into a narrow channel, increasing the amount of heat circulating through a microchip’s nanotransistor.
Conventional wisdom suggests the solution is to keep the guts of these gadgets cool.
But a new University at Buffalo research paper hints at the opposite: that is, to make laptops and other portable electronic devices more robust, more heat might be the answer.
“We’ve found that it’s possible to protect nanoelectronic devices from the heat they generate in a way that preserves how these devices function,” said Jonathan Bird, UB professor of electrical engineering. “This will hopefully allow us to continue developing more powerful smartphones, tablets and other devices without having a fundamental meltdown in their operation due to overheating.”
The paper, “Formation of a protected sub-band for conduction in quantum point contacts under extreme biasing,” was published Jan. 19 in the journal Nature Nanotechnology.
Bird is the co-lead author along with Jong Han, UB associate professor of physics. Contributing authors are Jebum Lee and Jungwoo Song, both recently earned PhDs at UB; Shiran Xiao, PhD candidate at UB; and John L. Reno, Center for Integrated Nanotechnologies at Sandia National Laboratories.
Heat in electronic devices is generated by the movement of electrons through transistors, resistors and other elements of an electrical network. Depending on the network, there are a variety of ways, such as cooling fans and heat sinks, to prevent the circuits from overheating.
But as more integrated circuits and transistors are added to devices to boost their computing power, it’s becoming more difficult to keep those elements cool. Most research centers on developing advanced materials that are capable of withstanding the extreme environment inside smartphones, laptops and other devices.
While advanced materials show tremendous potential, the UB research suggests there may still be room within the existing paradigm of electronic devices to continue developing more powerful computers.
To achieve their findings, the researchers fabricated nanoscale semiconductor devices in a state-of-the-art gallium arsenide crystal provided to UB by Sandia’s Reno. The researchers then subjected the chip to a large voltage, squeezing an electrical current through the nanoconductors. This, in turn, increased the amount of heat circulating through the chip’s nano transistor.But instead of degrading the device, the nanotransistor spontaneously transformed itself into a quantum state which was protected from the effect of heating and provided a robust channel of electric current. To help explain, Bird offered an analogy to Niagara Falls.
“The water, or energy, comes from a source; in this case, the Great Lakes. It’s channeled into a narrow point (the Niagara River) and ultimately flows over Niagara Falls. At the bottom of waterfall is dissipated energy. But unlike the waterfall, this dissipated energy recirculates throughout the chip and changes how heat affects, or in this case doesn’t affect, the network’s operation.”
While this behavior may seem unusual, especially conceptualizing it in terms of water flowing over a waterfall, it is the direct result of the quantum mechanical nature of electronics when viewed on the nanoscale. The current is made up of electrons which spontaneously organize to form a narrow conducting filament through the nanoconductor. It is this filament that is so robust against the effects of heating.
“We’re not actually eliminating the heat, but we’ve managed to stop it from affecting the electrical network. In a way, this is an optimization of the current paradigm,” said Han, who developed the theoretical models which explain the findings.
The research was supported by the U.S. Department of Energy.
Cory Nealon | Newswise
New microchip demonstrates efficiency and scalable design
23.08.2016 | Princeton University, Engineering School
Computer programming made easier
16.08.2016 | National Science Foundation
Waveguides are widely used for filtering, confining, guiding, coupling or splitting beams of visible light. However, creating waveguides that could do the same for X-rays has posed tremendous challenges in fabrication, so they are still only in an early stage of development.
In the latest issue of Acta Crystallographica Section A: Foundations and Advances , Sarah Hoffmann-Urlaub and Tim Salditt report the fabrication and testing of...
Electrochemists at TU Graz have managed to use monocrystalline semiconductor silicon as an active storage electrode in lithium batteries. This enables an integrated power supply to be made for microchips with a rechargeable battery.
Small electrical gadgets, such as mobile phones, tablets or notebooks, are indispensable accompaniments of everyday life. Integrated circuits in the interiors...
Recent findings indicating the possible discovery of a previously unknown subatomic particle may be evidence of a fifth fundamental force of nature, according...
A nanocrystalline material that rapidly makes white light out of blue light has been developed by KAUST researchers.
Malignant cancer cells not only proliferate faster than most body cells. They are also more dependent on the most important cellular garbage disposal unit, the proteasome, which degrades defective proteins. Therapies for some types of cancer exploit this dependence: Patients are treated with inhibitors, which block the proteasome. The ensuing pile-up of junk overwhelms the cancer cell, ultimately killing it. Scientists have now succeeded in determining the human proteasome’s 3D structure in unprecedented detail and have deciphered the mechanism by which inhibitors block the proteasome. Their results will pave the way to develop more effective proteasome inhibitors for cancer therapy.
In order to understand how cellular machines such as the proteasome work, it is essential to determine their three-dimensional structure in detail. With its...
12.08.2016 | Event News
02.08.2016 | Event News
29.07.2016 | Event News
23.08.2016 | Information Technology
23.08.2016 | Life Sciences
23.08.2016 | Earth Sciences