Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Intelligent software and hardware systems connecting European disaster management

23.11.2012
International relief supplies and personnel support during earthquakes, floods or hurricane incidents are seen as a matter of course today.
The work of relief forces, however, is impeded not only by language barriers and unfavorable weather conditions, but also by the lack of standards, equipment and execution regulations.

Everyday work of fire rescue services and humanitarian organizations in Europe is increasingly influenced by modern information and communication technologies (ICT). Such innovative systems can facilitate, for instance, the search for people in danger and the optimized planning of the use of rescue equipment, pumps and other resources.

The difficulty is increased if relief forces from various countries have to work together in large-scale crisis situations. The multitude of different IT systems causes the electronic communication of information across organizational boundaries to be inefficient or not possible at all, as unified standards for interfaces or, in some cases, the necessary infrastructure for data transmission are lacking.

The EC-funded project IDIRA addresses precisely these issues. 18 organizations from 7 EU countries are searching for solutions over a project duration of four years. German partners involved in the project are the Fraunhofer Institute for Transportation and Infrastructure Systems IVI and the German Red Cross, Saxony branch.

On 22nd November 2012, an official review meeting was held in the German Red Cross headquarters of Saxony in Dresden, where the first IDIRA results were successfully demonstrated to representatives of the European Commission. This important milestone is paving the way for the project consortium to continue their work in the coming months. The project results will be tested and validated within small and large-scale exercises in 2013 and 2014. Thereby, flood scenarios in the bordering regions in Poland and Czech Republic will be the main focus for the partners from Saxony.

After completion of IDIRA in 2015, it will show in how far European countries have become closer in the field of disaster management.

Elke Sähn | Fraunhofer-Institut
Further information:
http://www.idira.eu/
http://www.ivi.fraunhofer.de/

More articles from Information Technology:

nachricht The Flexible Grid Involves its Users
27.09.2016 | Fraunhofer-Institut für Angewandte Informationstechnik FIT

nachricht Optical fiber transmits one terabit per second – Novel modulation approach
16.09.2016 | Technische Universität München

All articles from Information Technology >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: First-Ever 3D Printed Excavator Project Advances Large-Scale Additive Manufacturing R&D

Heavy construction machinery is the focus of Oak Ridge National Laboratory’s latest advance in additive manufacturing research. With industry partners and university students, ORNL researchers are designing and producing the world’s first 3D printed excavator, a prototype that will leverage large-scale AM technologies and explore the feasibility of printing with metal alloys.

Increasing the size and speed of metal-based 3D printing techniques, using low-cost alloys like steel and aluminum, could create new industrial applications...

Im Focus: New welding process joins dissimilar sheets better

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...

Im Focus: First quantum photonic circuit with electrically driven light source

Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.

Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Call for Paper – Panacea Green Infrastructure?

30.09.2016 | Event News

HLF: From an experiment to an establishment

29.09.2016 | Event News

European Health Forum Gastein 2016 kicks off today

28.09.2016 | Event News

 
Latest News

First-Ever 3D Printed Excavator Project Advances Large-Scale Additive Manufacturing R&D

30.09.2016 | Materials Sciences

New Technique for Finding Weakness in Earth’s Crust

30.09.2016 | Earth Sciences

Cells migrate collectively by intermittent bursts of activity

30.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>