A team led by researchers at the University of Maryland School of Public Health has found that the “superbug” methicillin-resistant Staphylococcus aureus (MRSA) is prevalent at several U.S. wastewater treatment plants (WWTPs).
Scanning electron micrograph of methicillin-resistant Staphylococcus aureus (MRSA)
Photo Credit: NIAID
MRSA is well known for causing difficult-to-treat and potentially fatal bacterial infections in hospital patients, but since the late 1990s it has also been infecting otherwise healthy people in community settings.
“MRSA infections acquired outside of hospital settings--known as community-acquired MRSA or CA-MRSA--are on the rise and can be just as severe as hospital-acquired MRSA. However, we still do not fully understand the potential environmental sources of MRSA or how people in the community come in contact with this microorganism,” says Amy R. Sapkota, assistant professor in the Maryland Institute for Applied Environmental Health and research study leader. “This was the first study to investigate U.S. wastewater as a potential environmental reservoir of MRSA.”
Because infected people can shed MRSA from their noses and skin and through their feces, wastewater treatment plants are a likely reservoir for the bacteria. Swedish researchers have previously identified the presence of MRSA in WWTPs in Sweden, and this new UMD-led study confirms the presence of MRSA in U.S. facilities. The study was published in the November issue of the journal Environmental Health Perspectives.
The research team, including University of Maryland School of Public Health and University of Nebraska Medical Center researchers, collected wastewater samples throughout the treatment process at two Mid-Atlantic and two Midwestern WWTPs. These plants were chosen, in part, because treated effluent discharged from these plants is reused as “reclaimed wastewater” in spray irrigation activities. The researchers were interested in whether MRSA remained in the effluent.
Reclaimed water or recycled water, is former sewage that is treated to remove solids and certain impurities, and used in landscaping irrigation. Researchers urge further study to evaluate the risk of exposure to antibiotic-resistant bacteria (MRSA) in treated wastewater.
They found that MRSA, as well as a related pathogen, methicillin-susceptible Staphylococcus aureus (MSSA),were present at all four WWTPs, with MRSA in half of all samples and MSSA in 55 percent.MRSA was present in 83 percent of the influent-- the raw sewage--at all plants, butthe percentage of MRSA- and MSSA-positive samples decreased as treatment progressed. Only one WWTP had the bacteria in the treated water leaving the plant, and this was at a plant that does not regularly use chlorination, a tertiary step in wastewater treatment.
Ninety-three percent of the MRSA strains that were isolated from the wastewater and 29 percent of MSSA strains were resistant to two or more classes of antibiotics, including several that the U.S. Food and Drug Administration has specifically approved for treating MRSA infections. At two WWTPs, MRSA strains showed resistance to more antibiotics and greater prevalence of a gene associated with virulence at subsequent treatment stages, until tertiary chlorination treatment appeared to eliminate all MRSA. This suggests that while WWTPs effectively reduce MRSA and MSSA from influent to effluent, they may select for increased antibiotic resistance and virulence, particularly at those facilities that do not employ tertiary treatment (via chlorination).
“Our findings raise potential public health concerns for wastewater treatment plant workers and individuals exposed to reclaimed wastewater,” says Rachel Rosenberg Goldstein, environmental health doctoral student in the School of Public Health and the study’s first author. “Because of increasing use of reclaimed wastewater, further research is needed to evaluate the risk of exposure to antibiotic-resistant bacteria in treated wastewater.”
The paper Methicillin-Resistant Staphylococcus aureus (MRSA) Detected at Four U.S. Wastewater Treatment Plants was written by Rachel E. Rosenberg Goldstein, Shirley A. Micallef, Shawn G. Gibbs, Johnnie A. Davis,Xin He, Ashish George, Lara M. Kleinfelter,Nicole A. Schreiber, Sampa Mukherjee, Amir Sapkota,Sam W. Joseph, and Amy R. Sapkota and published in the November 2012 issue of Environmental Health Perspectives.
For more information, please contact Kelly Blake, communications director for the School of Public Health at email@example.com or (301) 405-9418.
Kelly Blake | EurekAlert!
Further reports about: > Cancer treatment > Environmental Health > Environmental Health Perspectives > MRSA > MRSA infection > Maryland > Staphylococcus > Staphylococcus aureus > WWTPs > Wastewater > antibiotic-resistant bacteria > bacterial infection > environmental risk > health services > resistant bacteria > risk of exposure > superbugs > treated wastewater > wastewater treatment > wastewater treatment plant > water treatment > water treatment plants
Malaysia's unique freshwater mussels in danger
27.09.2016 | The University of Nottingham Malaysia Campus
How to detect water contamination in situ?
22.09.2016 | Tomsk Polytechnic University (TPU)
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
29.09.2016 | Event News
28.09.2016 | Event News
27.09.2016 | Event News
29.09.2016 | Materials Sciences
29.09.2016 | Materials Sciences
29.09.2016 | Interdisciplinary Research