A new study published in the journal Science says that the total impact of switching to natural gas depends heavily on leakage of methane (CH4) during the natural gas life cycle, and suggests that more can be done to reduce methane emissions and to improve measurement tools which help inform policy choices.
Published in the February 14 issue of Science, the study, “Methane Leaks from North American Natural Gas Systems,” presents a first effort to systematically compare North American emissions estimates at scales ranging from device-level to continental atmospheric studies. Because natural gas emits less carbon dioxide during combustion than other fossil fuels, it has been looked to as a ‘bridge’ fuel to a lower carbon energy system.
“With this study and our larger body of work focusing on natural gas and our transforming energy economy, we offer policymakers and investors a solid analytical foundation for decision making,” said Doug Arent, executive director of the Joint Institute for Strategic Energy Analysis (JISEA) and a co-author to the study. “While we found that official inventories tend to under-estimate total methane leakage, leakage rates are unlikely to be high enough to undermine the climate benefits of gas versus coal.”
The article was organized by Novim with funding from the Cynthia and George Mitchell Foundation and led by Stanford University’s Adam Brandt. It was co-written by researchers from Stanford University, JISEA, Energy Department’s National Renewable Energy Laboratory (NREL), University of Michigan, Massachusetts Institute of Technology, National Oceanic and Atmospheric Administration, University of Calgary, U.S. State Department, Harvard University, Lawrence Berkeley National Laboratory, University of California Santa Barbara, and the Environmental Defense Fund.
“Recent life cycle assessments generally agree that replacing coal with natural gas has climate benefits,” said Garvin Heath, a senior scientist at the NREL and a lead author of the report. “Our findings show that natural gas can be a bridge to a sustainable energy future, but that bridge must be traversed carefully. Current evidence suggests leakages may be larger than official estimates, so diligence will be required to ensure that leakage rates are actually low enough to achieve sustainability goals.”
Among other key findings of the research:
• Official inventories of methane leakage consistently underestimate actual leakage.
• Evidence at multiple scales suggests that the natural gas and oil sectors are important contributors.
• Independent experiments suggest that a small number of “super-emitters” could be responsible for a large fraction of leakage.
• Recent regional atmospheric studies with very high emissions rates are unlikely to be representative of typical natural gas system leakage rates.
• Hydraulic fracturing is not likely to be a substantial emissions source, relative to current national totals.
• Abandoned oil and gas wells appear to be a significant source of current emissions.
• Emissions inventories can be improved in ways that make them a more essential tool for policymaking.JISEA is operated by the Alliance for Sustainable Energy, LLC on behalf of the National Renewable Energy Laboratory, the University of Colorado – Boulder, the Colorado School of Mines, the Colorado State University, the Massachusetts Institute of Technology, and Stanford University.
David Glickson | EurekAlert!
How to detect water contamination in situ?
22.09.2016 | Tomsk Polytechnic University (TPU)
Quantifying the chemical effects of air pollutants on oxidative stress and human health
12.09.2016 | Max-Planck-Institut für Chemie
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
23.09.2016 | Event News
20.09.2016 | Event News
16.09.2016 | Event News
27.09.2016 | Information Technology
27.09.2016 | Machine Engineering
27.09.2016 | Physics and Astronomy