Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Simulating the impact of ocean acidification on stony corals

30.11.2012
Ocean acidification and its consequences for marine life pose several pressing problems that are of concern to scientists all over the world. Scientists from the ZMT have developed a mathematical model with which they can simulate different scenarios of ocean acidification and the expected impacts on stony corals.
Ocean acidification and its consequences for marine life pose several pressing problems that are of concern to scientists all over the world. One alarming scenario is that stony corals may lose the ability to produce calcium carbonate skeletons and may no longer be able to form reefs with their structures that offer protection and habitats for an extraordinary variety of species. But how likely is such a development?

In order to make informed predictions, scientists must first understand the processes of skeletal development in single organisms and how these processes are impacted by perturbation factors. Researchers of the Leibniz Center for Tropical Marine Ecology (ZMT) in Bremen have developed a mathematical model that simulates in detail the calcification of coral polyps on the organism level. “With such a model, various scenarios of ocean acidification can be simulated and their effects on stony corals examined,” says the ecologist Sönke Hohn.

Atmospheric CO2 dissolves in seawater and forms carbonic acid. Rising carbon dioxide concentrations ultimately cause seawater to acidify. While today the surface water of the oceans has a pH of about 8.2, it is expected that this value will decrease to 7.8 by the year 2100. An acidic environment dissolves calcium carbonate. It has been known for some time that increasing CO2 levels reduce the ability of many marine organisms to produce their calcium carbonate skeletons. A study published in Science not long ago showed images of "naked" coral polyps that were exposed to pH values of 7.4 and received global attention. However, thus far it has remained unclear how the calcification process works under perturbed conditions. Scientists in Bremen have elucidated this process in more detail.

At the underside of their skin, polyps secrete calcium carbonate thus creating skeletal structures. All polyps of a coral colony are connected with each other via a layer of tissue. This separates the surrounding seawater from the fluid in which the calcareous skeleton is formed. Using a mathematical model, the scientists from the ZMT were able to prove that CO2 penetrates through the layers of tissue into the calcifying fluid. This suggests that despite the fact that corals actively regulate ion transport mechanisms, an increase in CO2 levels makes them unable to fight against CO2 diffusion.

The model describes the complex biochemical processes of ion exchanges and calcification in four compartments: the surrounding seawater, the polyp tissue, the stomach, and the calcifying fluid beneath the polyp. The model was based on data from various studies. But in particular a series of experiments carried out at the ZMT in the past were used, in which pH and calcium ion concentrations were measured below the polyp tissue using microprobes.

“Not even sophisticated laboratory experiments are sufficient to completely understand the process of calcification" says Agostino Merico, who helped to develop the modelling approach. “By simulating all relevant physiological processes, our model elucidates the complex processes and quantifies the effects of ocean acidification at the organism level." Thus, calculations with increased CO2 levels in the atmosphere, as they are expected in a worst-case scenario in 2100, would result in a 10% reduction of the calcification rates in stony corals. In a next step, the combined impact of ocean warming and acidification will be studied using the model.

Publication:
Hohn, S., Merico, A. (2012) Modelling coral polyp calcification in relation to ocean acidification, Biogeosciences, 9, 4441-4454. doi: 10.5194/bg-9-4441-2012.

More information:

Dr. Sönke Hohn
Leibniz-Zentrum für Marine Tropenökologie
Tel: 0421 - 23800 105
Mail: soenke.hohnzmt-bremen.de

Dr. Susanne Eickhoff | idw
Further information:
http://www.zmt-bremen.de

More articles from Ecology, The Environment and Conservation:

nachricht How to detect water contamination in situ?
22.09.2016 | Tomsk Polytechnic University (TPU)

nachricht Quantifying the chemical effects of air pollutants on oxidative stress and human health
12.09.2016 | Max-Planck-Institut für Chemie

All articles from Ecology, The Environment and Conservation >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Stronger turbine blades with molybdenum silicides

26.09.2016 | Materials Sciences

Scientists Find Twisting 3-D Raceway for Electrons in Nanoscale Crystal Slices

26.09.2016 | Materials Sciences

Lowering the Heat Makes New Materials Possible While Saving Energy

26.09.2016 | Materials Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>