Global climate change, desertification, and over-population are already taking their toll on fresh water supplies. In coming years, fresh water could become a rare and expensive commodity. In the latest issue of the journal IJND, research results presented at the Trombay Symposium On Desalination And Water Reuse offer a new perspective on desalination and describe alternatives to the current expensive and inefficient methods.
Pradip Tewari of the Desalination Division at Bhabha Atomic Research Centre, in Mumbai, India, discusses the increasing demand for water in India driven not only by growing population and expectancies rapid agricultural and industrial expansion. He suggests that a holistic approach is needed to cope with freshwater needs, which include primarily seawater desalination in coastal areas and brackish water desalination as well as rainwater harvesting, particularly during the monsoon season. "The contribution of seawater and brackish water desalination would play an important role in augmenting the freshwater needs of the country."
Meenakshi Jain of CDM & Environmental Services and Positive Climate Care Pvt Ltd in Jaipur highlights the energy problem facing regions with little fresh water. "Desalination is an energy-intensive process. Over the long term, desalination with fossil energy sources would not be compatible with sustainable development; fossil fuel reserves are finite and must be conserved for other essential uses, whereas demands for desalted water would continue to increase."
Jain emphasises that a sustainable, non-polluting solution to water shortages is essential. Renewable energy sources, such as wind, solar, and wave power, may be used in conjunction to generate electricity and to carry out desalination, which could have a significant impact on reducing potential increased greenhouse gas emissions. "Nuclear energy seawater desalination has a tremendous potential for the production of freshwater," Jain adds.
The development of a floating nuclear plant is one of the more surprising solutions to the desalination problem. S.S. Verma of the Department of Physics at SLIET in Punjab, points out that small floating nuclear power plants represent a way to produce electrical energy with minimal environmental pollution and greenhouse gas emissions. Such plants could be sited offshore anywhere there is dense coastal population and not only provide cheap electricity but be used to power a desalination plant with their excess heat. "Companies are already in the process of developing a special desalination platform for attachment to FNPPs helping the reactor to desalinate seawater," Verma points out.
A. Raha and colleagues at the Desalination Division of the Bhabha Atomic Research Centre, in Trombay, point out that Low-Temperature Evaporation (LTE) desalination technology utilising low-quality waste heat in the form of hot water (as low as 50 Celsius) or low-pressure steam from a nuclear power plant has been developed to produce high-purity water directly from seawater. Safety, reliability, viable economics, have already been demonstrated. BARC itself has recently commissioned a 50 tonnes per day low-temperature desalination plant.
Co-editor of the journal, B.M. Misra, formerly head of BARC, suggests that solar, wind, and wave power, while seemingly cost effective approaches to desalination, are not viable for the kind of large-scale fresh water production that an increasingly industrial and growing population needs.
India already has plans for the rapid expansion of its nuclear power industry. Misra suggests that large-scale desalination plants could readily be incorporated into those plans. "The development of advanced reactors providing heat for hydrogen production and large amount of waste heat will catalyse the large-scale seawater desalination for economic production of fresh water," he says.
Jim Corlett | alfa
Malaysia's unique freshwater mussels in danger
27.09.2016 | The University of Nottingham Malaysia Campus
How to detect water contamination in situ?
22.09.2016 | Tomsk Polytechnic University (TPU)
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
27.09.2016 | Event News
23.09.2016 | Event News
20.09.2016 | Event News
27.09.2016 | Life Sciences
27.09.2016 | Life Sciences
27.09.2016 | Ecology, The Environment and Conservation