Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Hurricane Sandy May Be a Blessing for Tiny Piping Plover

29.01.2014
Storm-created inlets may provide precious habitat for imperiled birds

Few can forget the destruction left behind by Hurricane Sandy, which pummeled the shorelines of the Eastern United States. For the tiny piping plover, however, the storm may have been a blessing in disguise.


Google Earth

Aerial view showing the new inlet on New York’s Fire Island and large areas of sand pushed over vegetation by Hurricane Sandy. Image generated from Google Earth.

The threatened shorebird, which migrates in spring to nest on sandy beaches along the Atlantic coast, is expected to capitalize on new habitat created by the storm on hard-hit Long Island, N.Y.

“Hurricane Sandy pushed sand over the vegetation of the barrier islands, leaving behind wider sandy beaches, which is the plover’s preferred habitat,” said Jim Fraser, a professor of wildlife conservation in the College of Natural Resources and Environment at Virginia Tech, who has studied piping plovers and other shorebirds for almost three decades.

The bird was federally listed as threatened and endangered in 1986.

Hurricane Sandy in 2012 created three inlets on Long Island’s south shore, two of which the U.S. Army Corps of Engineers quickly filled. Fraser says he hopes the third inlet, in a designated wilderness area of Fire Island National Seashore, will remain open, as it is New York’s only natural inlet.

Long since the storm has passed, the inlet continues to shape the barrier islands, further improving plover habitat. The birds like to feed on insects and invertebrates that reside in intertidal flats — shallow, watery areas on the bay side of barrier islands.

Leaving the inlet open would not only be good for the piping plover, it would also be a smart move for taxpayers, according to Fraser. “Post-storm public works projects are incredibly expensive. Ultimately, the taxpayer ends up footing the bill.”

On precarious barrier islands, houses and other buildings are vulnerable to destruction. The sands shift constantly under normal conditions; superstorms like Sandy rearrange them dramatically.

“We live too close to the sea,” Fraser continued. “The human, structural, and environmental costs are very high, and they are increasing with each storm as coastal development shows no signs of abating.”

While storm damage affects humans negatively, it can have the opposite effect on wildlife. “Storm-created habitat is good for piping plovers and other birds,” explained Fraser. Other positive environment impacts have also been observed. “Local people say the fishing is better, clams are growing faster, and the water is cleaner.”

Fraser’s work studying piping plovers in other environments, including a 12-year observation in nearby West Hampton Dunes, N.Y., confirms that plover populations increase when new habitat is created on barrier islands after massive storms.

He expects to see plover populations on Long Island surge when the birds return this spring. His ongoing research is monitoring the outcome.

Related information can be found on the Virginia Tech News website.

Lynn Davis | Newswise
Further information:
http://www.vt.edu

More articles from Ecology, The Environment and Conservation:

nachricht How to detect water contamination in situ?
22.09.2016 | Tomsk Polytechnic University (TPU)

nachricht Quantifying the chemical effects of air pollutants on oxidative stress and human health
12.09.2016 | Max-Planck-Institut für Chemie

All articles from Ecology, The Environment and Conservation >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Chains of nanogold – forged with atomic precision

23.09.2016 | Life Sciences

New leukemia treatment offers hope

23.09.2016 | Health and Medicine

Self-assembled nanostructures hit their target

23.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>