Under the leadership of Fraunhofer UMSICHT, 212 project partners are developing components that contribute to the sustainable processing of milk and a redesign of the dairy industry via their use in existing dairy infrastructures. For the next three years, the EU Project SUSMILK will be sponsored by the 7th Research Framework Program (FP7) of the European Commission.
Before milk gets from the cow into the bottle or carton, its processing is characterized by a multitude of heating and cooling processes. Even though the infrastructures necessary for this are most often not aligned with current sustainability standards, they often are utilized in the foodstuffs industry for up to 30 years. In the EU Project SUSMILK, Fraunhofer UMSICHT and the project partners are developing components for use in existing dairy infrastructures, with the objective of savings in energy, water and CO2 emissions.
Technical "greenification" in foodstuffs production
Based on five dairies of different sizes, an overall concept of a green dairy is being developed. This encompasses the development of technical components, their installation and testing at partner dairies, as well as process simulation and eco balance sheets. The goal is not a one-size-fits-all solution for dairies but rather an optimization of individual systems, customized to the situation of a dairy. There are different optimization options:
"To save energy on-site, we utilize solar-thermal energy conversion through which we want to provide the thermal base load energy for the dairy. In addition, we use - for example - solar energy in high temperature solar panels for steam generation, which we couple with biomass boilers. In turn, we use the waste heat streams of the dairy to generate cold (absorption refrigeration). For this, we optimally adapt the systems to the respective dairy. Furthermore, heat pumps that feature both a high and a low temperature side help to optimally distribute the heat in the dairy", project coordinator Dr. Christoph Glasner explains the concept.
Milk concentrate saves water and energy
To save water and energy, Fraunhofer UMSICHT in one part of the project is specializing in the energy-efficient manufacturing of milk concentrate with improved quality. This measure has the potential to reduce both the transport energy and the tank sizes at the dairy. Standardized and dried concentrate is not only of interest for the manufacturing of products such as cheese, yoghurt and baked goods, but also for bridging the gap in case of supply shortages. In some regions of Europe, the supply with milk in part varies seasonally. With concentrated, dried milk, a storable product is at hand that is available the whole year in consistent quality and quantity.
Recycling of waste water and waste
The waste water inescapably generated in production and system cleaning has high organic loads. It is cleaned up via membrane technology and thus put to reuse in closed water circulation systems. Additionally, it is conceivable to generate energy in the form of biogas or bioethanol from waste treatment and to use it within the dairy for heat and electricity. Also, there is the option to recycle the universal material lactic acid from water streams.
For the next three years, SUSMILK will be sponsored by the 7th Research Framework Program (FP7) of the European Commission.
Malaysia's unique freshwater mussels in danger
27.09.2016 | The University of Nottingham Malaysia Campus
How to detect water contamination in situ?
22.09.2016 | Tomsk Polytechnic University (TPU)
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
27.09.2016 | Event News
23.09.2016 | Event News
20.09.2016 | Event News
27.09.2016 | Life Sciences
27.09.2016 | Physics and Astronomy
27.09.2016 | Life Sciences