The Wildlife Conservation Society announced today the successful release of 19 critically endangered baby Siamese crocodiles into a local wetland in Lao PDR, where they will be repatriated into the wild.
Members of the Village Crocodile Conservation Group prepare to release three of the nineteen Siamese crocodiles.
The 19-month-old hatchlings, approximately 70 cm (27 inches) in length, are part of a head-starting program where crocodiles are hatched at the Lao Zoo for eventual release into their native habitat.
Conservationists estimate that less than 250 Siamese crocodiles remain in the wild due to overhunting and habitat loss.
The release took place in the village of Than Soum in the Xe Champhone wetland complex in Savanakhet Province near where the eggs of the 19 crocodiles were found during wildlife surveys in 2011.
The hatchlings were transported from the Lao Zoo to a ‘soft release’ pen and will remain for several months to acclimate with the local area. Members of the Village Crocodile Conservation Group will guard the pen and provide supplementary feeding of the hatchlings to ensure their survival. Once the rainy season begins, the water level in the wetland will rise and allow the crocodiles to swim away, where they will be monitored periodically by conservationists.
A public ceremony will take place on March 6th in Than Soum where local community members will celebrate this collaborative effort with WCS, Government of Lao PDR, Ministry of Natural Resources and Environment, Minmetals Resources Limited, and the Lao Zoo.
WCS Lao PDR Program designed and implemented the release as part of the Community-based Crocodile Recovery and Livelihood Improvement Project. The goal of the program is the recovery of the local Siamese crocodile population and restoration of associated wetlands, linked by socio-economic incentives that improve local livelihoods.
“We are extremely pleased with the success of this collaborative program and believe it is an important step in contributing to the conservation of the species by involving local communities in long term wetland management,” said Alex McWilliam a conservation biologist with WCS’s Lao PDR Program. “The head starting component of this integrated WCS program represents a significant contribution to the conservation of this magnificent animal in the wild.”
Rick Watsford, General Manager, MMG Lane Xang Minerals Limited Sepon, said: “MMG is proud to support the work of the Government of Lao PDR and the WCS in relation to this program. This support demonstrates our company’s commitment contributing positively to the communities in which we operate.”
Joe Walston, WCS Executive Director for Asia Programs, said: “Successful conservation is about partnerships – whether it’s at the global level with climate change and wildlife trade or the local level with tigers and crocs – the collective support of local communities, governments, and the private sector in Laos makes stories like this so encouraging.”
Classified as Critically Endangered by the International Union for the Conservation of Nature, the Siamese crocodile grows up to 10 feet in length. The species has been eliminated from much of its former range through Southeast Asia and parts of Indonesia by overhunting and habitat degradation and loss.
In 2014, the head-starting component of the program will be taken on by local communities in the Xe Champhone wetland complex. WCS has already conducted training for this transition and implemented a trial program of rearing young crocodiles at Than Soum village.
The Wildlife Conservation Society saves wildlife and wild places worldwide. We do so through science, global conservation, education and the management of the world's largest system of urban wildlife parks, led by the flagship Bronx Zoo. Together these activities change attitudes towards nature and help people imagine wildlife and humans living in harmony. WCS is committed to this mission because it is essential to the integrity of life on Earth. Visit www.wcs.org.
Special Note to the Media: If you would like to guide your readers or viewers to a Web link where they can make donations in support of helping save wildlife and wild places, please direct them to wcs.org.
Stephen Sautner | Newswise
How to detect water contamination in situ?
22.09.2016 | Tomsk Polytechnic University (TPU)
Quantifying the chemical effects of air pollutants on oxidative stress and human health
12.09.2016 | Max-Planck-Institut für Chemie
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.
K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...
23.09.2016 | Event News
20.09.2016 | Event News
16.09.2016 | Event News
26.09.2016 | Materials Sciences
26.09.2016 | Materials Sciences
26.09.2016 | Materials Sciences