Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

World’s first demonstration of power transfer from wheels to power an electric car

05.12.2012
Electric vehicles (EV) have ten times higher energy performance than automobiles powered by gasoline-based engines.

However, they are not yet popular with drivers due to the need to store large batteries onboard. Now, Takashi Ohira and colleagues are developing an innovative method for powering EVs that drastically reduces the number of batteries.

Electric vehicles (EV) have ten times higher energy performance than automobiles powered by gasoline-based engines. EVs show tremendous potential as an effective solution to both energy shortages and global warming.

However, conventional battery-based EVs are not popular with drivers because of drawbacks including: (1) short cruising range; (2) long time to recharge; and (3) high cost. Now, assuming that these drawbacks stem from the need to store large batteries onboard cars, then there are strong demands for alternatives means of powering electric cars. In a novel approach, Takashi Ohira at Toyohashi University of Technology and colleagues are developing an innovative method for powering EVs that drastically reduces the number of batteries.

The approach exploits the steel belt usually embedded in rubber tires. The steel belt collects power excited from a pair of electrodes buried beneath the road surface. And, since the steel belt is electrically insulated by the rubber tread, the researchers used a displacement current at high frequency to penetrate from underground to the steel belt.

The researchers constructed a 1/32 scale EV to proof their concept for the electric car. The car moved successfully with a power penetration efficiency exceeding 75% at 52 MHz. This is the world-first demonstration of electric power transfer via the car-wheel to the vehicle.

“If the scheme is applied into practice, we believe it would enable a tremendous extension of the EV cruising range,” says Ohira.

Journal information

Authors: Y. Suzuki, T. Sugiura, N. Sakai, M.Hanazawa, and T. Ohira.
Title of original paper: Dielectric Coupling from Electrified Roadway to Steel-Belt Tires Characterized for Miniature Model Car Running Demonstration.
Journal, volume, pages and year: IEEE MTT-S International Microwave Workshop Series on Innovative Wireless Power Transmission, IMWS-IWPT2012, pp.35-38 (2012).
Digital Object Identifier (DOI): 10.1109/IMWS.2012.6215814
Affiliations: Department of Electrical & Electronic information Engineering.

Adarsh Sandhu | Research asia research news
Further information:
http://www.tut.ac.jp/english
http://www.researchsea.com

More articles from Power and Electrical Engineering:

nachricht New welding process joins dissimilar sheets better
28.09.2016 | Technologie Lizenz-Büro (TLB) der Baden-Württembergischen Hochschulen GmbH

nachricht Cooling buildings with solar heat
26.09.2016 | FIZ Karlsruhe – Leibniz-Institut für Informationsinfrastruktur GmbH

All articles from Power and Electrical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: First-Ever 3D Printed Excavator Project Advances Large-Scale Additive Manufacturing R&D

Heavy construction machinery is the focus of Oak Ridge National Laboratory’s latest advance in additive manufacturing research. With industry partners and university students, ORNL researchers are designing and producing the world’s first 3D printed excavator, a prototype that will leverage large-scale AM technologies and explore the feasibility of printing with metal alloys.

Increasing the size and speed of metal-based 3D printing techniques, using low-cost alloys like steel and aluminum, could create new industrial applications...

Im Focus: New welding process joins dissimilar sheets better

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...

Im Focus: First quantum photonic circuit with electrically driven light source

Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.

Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Call for Paper – Panacea Green Infrastructure?

30.09.2016 | Event News

HLF: From an experiment to an establishment

29.09.2016 | Event News

European Health Forum Gastein 2016 kicks off today

28.09.2016 | Event News

 
Latest News

First-Ever 3D Printed Excavator Project Advances Large-Scale Additive Manufacturing R&D

30.09.2016 | Materials Sciences

New Technique for Finding Weakness in Earth’s Crust

30.09.2016 | Earth Sciences

Cells migrate collectively by intermittent bursts of activity

30.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>