Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

WindForS Research Cluster Establishes Office and Launches Further Research Project

04.02.2014
Wind Energy for Complex Terrain

Use of wind energy at challenging sites such as the mountainous regions of southern Germany is at the heart of WindForS, the wind energy research cluster in southern Germany.

For a period of three years, the Baden-Württemberg Ministry for Science, Research and the Arts is providing the funds for a WindFors office at the University of Stuttgart. The initial funding is meant to help professionalise the cluster’s activities and enable its members to start work on the proposed goals. The WindForS office will be the first point of contact for the proposed test field in southern Germany and will press ahead with its realisation.

In order to reach the goals set for the installation of wind power capacity onshore, it will be crucially important that turbines can be operated on difficult terrain such as woods, montainous terrain and on ridges. On account of their meteorological particularities and their complex loading situation these turbines pose a significant challenge to wind turbine manufacturers.

Against this background, WindForS aims to continually improve the economic viability of wind energy use in complex-mountainous terrain and at the same time to take into account ecological and landscape aspects. To this end, the WindForS partners intend to develop technical and non-technical solutions for wind energy use on sites that are topologically difficult such as the mountainous regions of southern Germany.

The research cluster includes as partners the University of Stuttgart, Karlsruhe Institute of Technology, the University of Tübingen, TU München, the Centre for Solar Energy and Hydrogen Research Baden-Württemberg as well as the Universities of Applied Sciences of Aalen and Esslingen. The WindForS office will be mainly concerned with initiating further research projects on a national and international level. It is headed by Andreas Rettenmeier who has been employed with the wind energy unit at the University of Stuttgart’s Institute of Aircraft Design since 2004 and played a vital part in initiating WindForS.

KonTest Project – Test Field Design
Only recently “KonTest“, the second WindForS research project funded by the Federal Ministry for the Environment, has been launched. The main purpose of the two-year collaborative project is to design a wind test field in southern Germany and to find a test field location in Baden-Württemberg or Bavaria. The project results will subsequently be used in setting up a wind test site in complex mountainous terrain. In addition to meteorological masts, one or two research wind turbines of the 600-900 KW class with rotor diameters of about 40 - 80 m will be installed. These will be used to prepare, test and validate new technologies in terms of materials, design methods, aerodynamics, load monitoring, noise reduction, manufacturing engineering, operation management, measurement tools and techniques as well as monitoring. Further research will focus on energy storage and grid integration. Taking into account the experiences gained in, among others, the “alpha ventus” offshore project, issues of landscape aesthetics and ecology are seen as of vital importance and will therefore play an important part in designing the test field as well as in its operation.
For further information please contact:
Andreas Rettenmeier, Universität Stuttgart, Stiftungslehrstuhl Windenergie, Tel. +49 711 685-68325

email: rettenmeier (at) windfors.de, www.windfors.de

For the KonTest project: Jan Anger, Tel. +49 711 685-68289,
email: Anger (at) ifb.uni-stuttgart.de
Andrea Mayer-Grenu, Universität Stuttgart, Abt. Hochschulkommunikation,
Tel. 0711/685-82176, email: andrea.mayer-grenu (at) hkom.uni-stuttgart.de

Andrea Mayer-Grenu | idw
Further information:
http://www.windfors.de
http://www.uni-stuttgart.de

More articles from Power and Electrical Engineering:

nachricht Silicon solar cell of ISFH yields 25% efficiency with passivating POLO contacts
08.12.2016 | Institut für Solarenergieforschung GmbH

nachricht Robot on demand: Mobile machining of aircraft components with high precision
06.12.2016 | Fraunhofer IFAM

All articles from Power and Electrical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Electron highway inside crystal

Physicists of the University of Würzburg have made an astonishing discovery in a specific type of topological insulators. The effect is due to the structure of the materials used. The researchers have now published their work in the journal Science.

Topological insulators are currently the hot topic in physics according to the newspaper Neue Zürcher Zeitung. Only a few weeks ago, their importance was...

Im Focus: Significantly more productivity in USP lasers

In recent years, lasers with ultrashort pulses (USP) down to the femtosecond range have become established on an industrial scale. They could advance some applications with the much-lauded “cold ablation” – if that meant they would then achieve more throughput. A new generation of process engineering that will address this issue in particular will be discussed at the “4th UKP Workshop – Ultrafast Laser Technology” in April 2017.

Even back in the 1990s, scientists were comparing materials processing with nanosecond, picosecond and femtosesecond pulses. The result was surprising:...

Im Focus: Shape matters when light meets atom

Mapping the interaction of a single atom with a single photon may inform design of quantum devices

Have you ever wondered how you see the world? Vision is about photons of light, which are packets of energy, interacting with the atoms or molecules in what...

Im Focus: Novel silicon etching technique crafts 3-D gradient refractive index micro-optics

A multi-institutional research collaboration has created a novel approach for fabricating three-dimensional micro-optics through the shape-defined formation of porous silicon (PSi), with broad impacts in integrated optoelectronics, imaging, and photovoltaics.

Working with colleagues at Stanford and The Dow Chemical Company, researchers at the University of Illinois at Urbana-Champaign fabricated 3-D birefringent...

Im Focus: Quantum Particles Form Droplets

In experiments with magnetic atoms conducted at extremely low temperatures, scientists have demonstrated a unique phase of matter: The atoms form a new type of quantum liquid or quantum droplet state. These so called quantum droplets may preserve their form in absence of external confinement because of quantum effects. The joint team of experimental physicists from Innsbruck and theoretical physicists from Hannover report on their findings in the journal Physical Review X.

“Our Quantum droplets are in the gas phase but they still drop like a rock,” explains experimental physicist Francesca Ferlaino when talking about the...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

ICTM Conference 2017: Production technology for turbomachine manufacturing of the future

16.11.2016 | Event News

Innovation Day Laser Technology – Laser Additive Manufacturing

01.11.2016 | Event News

#IC2S2: When Social Science meets Computer Science - GESIS will host the IC2S2 conference 2017

14.10.2016 | Event News

 
Latest News

Researchers identify potentially druggable mutant p53 proteins that promote cancer growth

09.12.2016 | Life Sciences

Scientists produce a new roadmap for guiding development & conservation in the Amazon

09.12.2016 | Ecology, The Environment and Conservation

Satellites, airport visibility readings shed light on troops' exposure to air pollution

09.12.2016 | Health and Medicine

VideoLinks
B2B-VideoLinks
More VideoLinks >>>