Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Research project adopts entirely new approach to developing micro-electromechanical systems (MEMS)

07.02.2013
The design of micro-electromechanical systems (MEMS) is about to undergo a technological revolution: experts from research institutions and industry are investigating entirely new methods for developing MEMS.

They are working together in the research project known as “Circuit Diagram-Based Design of MEMS for Applications in Optics and Robotics” – or MEMS2015 for short.


Insight of a hybrid inertial sensor package which is assembled in electronic control units (ECU).
Source: Robert Bosch GmbH

This project is funded by the Federal Ministry of Education and Research (BMBF) and coordinated by Robert Bosch GmbH. The aim is to develop the first ever universal design methodology for MEMS to plug the gaps between electronics and mechanics design, manufacturing, and subsequent integration into products.

MEMS are tiny components that require a minimum of space to measure and electronically process parameters such as acceleration, pressure, distance, temperature, light, or chemical concentrations. With their sophisticated, compact sensor and actuator systems, MEMS can for instance be used to ensure that airbags are inflated promptly before a car is involved in a collision, to measure blood pressure or oxygen content in intensive care applications, or to enable digital cameras to eliminate camera shake.

Potential 50 percent increase in the market for MEMS

The new development methods for MEMS will allow innovative sensor and actuator systems to be developed – providing robots, for instance, with more effective sight and touch in the future. What is more, the potential market for MEMS stands to increase by up to 50 percent as a result. Using a type of modular system, the MEMS2015 researchers aim to plug the gaps between chip and sensor manufacturing on the one hand and the subsequent integration of the modules into products on the other. This will substantially increase the opportunities for widespread use of MEMS in the professional and security-relevant segments. The new methods will also allow small and medium-sized enterprises to design MEMS and integrate them into their products much more often, as well as in a wider range of configurations than at present.

Projecting images directly onto the retina

These new development methods for MEMS will pave the way for entirely new solutions in the leading-edge applications of optics and robotics. This opens up the prospect of the wide-ranging use of micromirror arrays, similar to the devices already being used in projectors. This technology allows images to be projected directly onto the retina using special glasses. In robotics, force sensors and profilometers can be developed that analyze surfaces even more accurately than before, or that simulate an extremely precise sense of touch. The project findings are being verified as part of the project on the basis of real MEMS prototypes which, in turn, serve as demonstrators.

“The project opens up innovations in mechanical engineering and process plant engineering by using powerful sensor and actuator systems based on groundbreaking MEMS and chip technologies,” says Dr. Mirco Meiners, the project coordinator for MEMS2015 who works in the Bosch Automotive Electronics division. “The clear focus of funding from Germany’s Federal Ministry of Education and Research (BMBF) helps companies maintain their lead in innovation for key technology topics and develop new innovative, complex products.”

“The MEMS2015 project raises the bar when it comes to the quality and especially the productivity of MEMS design,” says Prof. Dr. Ralf Sommer, the scientific director of the Institut für Mikroelektronik- und Mechatronik-Systeme gemeinnützige GmbH, one of the eight partners in the project. “Basic concepts such as circuit diagram-based design, which are already successfully used in microelectronics design, are now being transferred to MEMS design. This offers users enormous advantages: for one thing, MEMS2015 facilitates new highly complex products, such as micromirror arrays, and speeds up the process of bringing them to market. For another, the project will allow us in the long run to produce a Lego-brick-style design. This will above all benefit small and medium-sized enterprises, allowing them to put together their own individual, tailor-made solutions in a flexible modular MEMS and electronics system.”

Eight partners from research and industry

The MEMS2015 research project, which has a three-year term and around 3.5 million euros in funding from Germany’s Federal Ministry of Education and Research (BMBF) as part of the German government’s High-Tech Strategy and the ICT 2020 development program, brings together the potential of eight partners from research and industry: Cadence Design Systems GmbH, Carl Zeiss SMT GmbH, Institut für Mikroelektronik- und Mechatronik-Systeme GmbH, Robert Bosch GmbH, the Technical University of Munich, TETRA Gesellschaft für Sensorik, Robotik und Automation mbH, the University of Bremen, and X-FAB Semiconductor Foundries AG. The edacentrum in Hannover is responsible for project management for MEMS2015.

For more information, visit http://www.edacentrum.de/mems2015

Press Contact:
Ralf Popp, edacentrum, Phone: +49 (511) 762-19697, Fax: +49 (511) 762-19695, popp@edacentrum.de

About edacentrum
The edacentrum is an independent institution dedicated to the promotion of research and development in the area of electronic design automation (EDA). Founded by the German microelectronics industry, it was funded during its early years by the German Federal Ministry of Education and Research (BMBF). The primary role of edacentrum is to initiate, evaluate and supervise industry-driven R&D projects, and to offer a comprehensive spectrum of services to support all matters concerning EDA development. Moreover, by encouraging EDA cluster research projects and EDA networks and by providing a communication platform for the EDA community, edacentrum brings together and reinforces the EDA expertise of universities and research institutes. The edacentrum seeks to increase awareness among upper management, the public and the political arena, of the critical importance of design automation for solving complex system and semiconductor problems, especially those associated with micro- and nanoelectronics.

Ralf Popp | idw
Further information:
http://www.edacentrum.de
http://www.edacentrum.de/mems2015

More articles from Power and Electrical Engineering:

nachricht New welding process joins dissimilar sheets better
28.09.2016 | Technologie Lizenz-Büro (TLB) der Baden-Württembergischen Hochschulen GmbH

nachricht Cooling buildings with solar heat
26.09.2016 | FIZ Karlsruhe – Leibniz-Institut für Informationsinfrastruktur GmbH

All articles from Power and Electrical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: New welding process joins dissimilar sheets better

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...

Im Focus: First quantum photonic circuit with electrically driven light source

Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.

Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

European Health Forum Gastein 2016 kicks off today

28.09.2016 | Event News

Laser use for neurosurgery and biofabrication - LaserForum 2016 focuses on medical technology

27.09.2016 | Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

 
Latest News

New imaging technique in Alzheimer’s disease - opens up possibilities for new drug development

28.09.2016 | Medical Engineering

Innovate coating extends the life of materials for industrial use

28.09.2016 | Materials Sciences

Blockchain Set to Transform the Financial Services Market

28.09.2016 | Business and Finance

VideoLinks
B2B-VideoLinks
More VideoLinks >>>