The University of Luxembourg team lead by Professor Susanne Siebentritt, head of the Laboratory for Photovoltaics, Physics Research Unit, has joined the project and will examine the basic semiconductor physics of new materials used in solar cells.
The overall objective of this project, which runs from September 2012 to August 2016, is the creation of a Marie Curie Initial Training Network for the structured interdisciplinary training of researchers in advanced thin film PV technologies. A lack of professionals with these competences has already been identified as one of the main risks for the future development and consolidation of a competitive European PV sector.
“We are looking at developing PV technologies based on kesterite material, a mineral heavy in copper and zinc, to meet the cost, efficiency and sustainability requirements for mass production of solar cells needed for solar energy”, explains Prof. Siebentritt. “With this training network we can keep Europe on the path to being a leader in solar energy”, she continues.
These new materials have a high potential for low cost thin film PV technologies, as kesterites are formed by abundant and cheap elements. The project proposes the development of PV technologies based on kesterite, and processes compatible with the efficiency requirements needed to become a reliable and future alternative to conventional non-renewable energy sources.
This collective of high level researchers will ensure the further strategic development of PV technologies in Europe, as described by the Technology Roadmap for PV Energy of the European Commission. Twelve doctoral students and two postdocs will be trained for the duration of the project in complementary aspects related to fundamental materials science, advanced growth techniques in thin film technologies, techniques for advanced characterisation and process monitoring, modelling and design of devices, as well as aspects related to the innovation and industrial implementation of production lines and market analysis.
The 3rd European Kesterite Workshop, Luxembourg 22 and 23 November, 2012
The University of Luxembourg is pleased to be bringing together experts from all over Europe who work on kesterite solar cells. These thin film solar cells contain only abundant and non-toxic elements and have the potential to become the next generation of solar cells.
Professors and researchers will discuss the growth of kesterite films and crystals, electronic and structural properties of kesterite materials and solar cell structure and characterisation.
Notes for the editor
This project is part of the FP7-PEOPLE programme of the EU Commission. The consortium consists of 11 groups with strong and well recognised experience in these fields. This includes IREC, Catalonia Institute for Energy Research, Spain as the coordinator group; Helmholtz Zentrum Berlin, Germany; EMPA, Swiss Federal Laboratories Materials Science and Technology, Switzerland; six Universities; University of Luxembourg, Luxembourg; Northumbria University, United Kingdom; Aix-Marseille University, France; Free University Berlin, Germany; Autonomous University of Madrid, Spain; University of Uppsala-Angstrom Solar Center, Sweden; and two companies NEXCIS, Photovoltaics, France and ASNT, Abengoa Solar New Technologies, Solar Energy, Spain.
Britta Schlüter | idw
New welding process joins dissimilar sheets better
28.09.2016 | Technologie Lizenz-Büro (TLB) der Baden-Württembergischen Hochschulen GmbH
Cooling buildings with solar heat
26.09.2016 | FIZ Karlsruhe – Leibniz-Institut für Informationsinfrastruktur GmbH
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
28.09.2016 | Event News
27.09.2016 | Event News
23.09.2016 | Event News
28.09.2016 | Medical Engineering
28.09.2016 | Materials Sciences
28.09.2016 | Business and Finance