The study, from University of New Hampshire professor Serita Frey and co-authors from the University of California-Davis and the Marine Biological Laboratory, sheds new light on how soil microorganisms respond to temperature and could improve predictions of how climate warming will affect the carbon dioxide flux from soils.
The activities of soil microorganisms release 10 times the carbon dioxide that human activities do on a yearly basis. Historically, this release of carbon dioxide has been kept in check by plants' uptake of the gas from the atmosphere. However, human activities are potentially upsetting this balance.Frey and co-authors Johan Six and Juhwan Lee of UC-Davis and Jerry Melillo of the Marine Biological Laboratory were curious how increased temperatures due to climate change might alter the amount of carbon released from soils. "While they're low on the charisma scale, soil microorganisms are so critically important to the carbon balance of the atmosphere," Frey says. "If we warm the soil due to climate warming, are we going to fundamentally alter the flux of carbon into the atmosphere in a way that is going to feed back to enhance climate change?"
"As you increase temperature, you decrease the efficiency – soil microorganisms release more carbon dioxide to the atmosphere – but only for the more complex food sources," Frey explains. "You could infer that as the soil warms, more carbon dioxide will be released into the atmosphere, exacerbating the climate problem."That effect diminishes, however, in the second scenario, in which soils were warmed to 5 degrees Celsius above the ambient temperature for 18 years. "When the soil was heated to simulate climate warming, we saw a change in the community to be more efficient in the longer term," Frey says, lessening the amount of carbon dioxide the soils release into the atmosphere and, in turn, their impact on the climate. "The positive feedback response may not be as strong as we originally predicted."
The researchers hypothesize that long-term warming may change the community of soil microorganisms so that it becomes more efficient. Organism adaptation, change in the species that comprise the soils, and/or changes in the availability of various nutrients could result in this increased efficiency.
This study was based on work done at the Harvard Forest Long-Term Ecological Research site in Petersham, Mass., where Frey and Melillo have been warming two sites – one 9 meters square, the other 36 meters square -- with underground cables for two versus 18 years. "It's like having a heating blanket under the forest floor," Frey says, "allowing us to examine how this particular environmental change—long-term soil warming—is altering how the soil functions."
The article, "The Temperature Response of Soil Microbial Efficiency and its Feedback to Climate," is published in the advanced online publication of Nature Climate Change on Jan. 20, 2013. To access the abstract or full text (subscribers only) of the article after the embargo lifts, use the digital object identifier (DOI) number 10.1038/NCLIMATE1796 at this link: http://dx.doi.org/.
This work was supported by an NSF Faculty Early Career Development Award, the NSF Long-term Ecological Research (LTER) Program, a DOE National Institute for Climatic Change Research (NICCR) grant, and a Harvard Forest Bullard Fellowship to Frey.Photographs available to download:
Credit: Perry Smith, UNH Photographic Serviceshttp://www.unh.edu/news/releases/2013/jan/forestplot.jpg
Credit: Alix Contosa, postdoctoral researcher at UNHhttp://www.unh.edu/news/releases/2013/jan/freyinfield.jpg
Credit: Brian Godbois, research assistant at UNHhttp://www.unh.edu/news/releases/2013/jan/freysoil.jpg
The University of New Hampshire, founded in 1866, is a world-class public research university with the feel of a New England liberal arts college. A land, sea, and space-grant university, UNH is the state's flagship public institution, enrolling 12,200 undergraduate and 2,300 graduate students.
Beth Potier | EurekAlert!
Giant see-saw of monsoon rains detected
26.09.2016 | Potsdam-Institut für Klimafolgenforschung
A new 3D viewer for improved digital geoscience mapping
20.09.2016 | Uni Research
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.
K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...
23.09.2016 | Event News
20.09.2016 | Event News
16.09.2016 | Event News
26.09.2016 | Materials Sciences
26.09.2016 | Materials Sciences
26.09.2016 | Materials Sciences