Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:


Raindrop Research Dials in Satellite Forecasting Accuracy

Dialing in the accuracy of satellite weather forecasting is the goal behind basic research into raindrop size and shape being done at The University of Alabama in Huntsville by a UAH doctoral student who is also an atmospheric scientist in the NASA Pathways Intern Employment Program.

Patrick Gatlin says his work measuring the height and width of raindrops using ground instruments provides an accuracy baseline that is then scaled up to ground radar and then to satellite measurements.

He is co-author of a paper on the topic (Tokay, Ali, Walter A. Petersen, Patrick Gatlin, Matthew Wingo, 2013: Comparison of Raindrop Size Distribution Measurements by Collocated Disdrometers. J. Atmos. Oceanic Technol., 30, 1672–1690;

“That’s really the whole purpose of measuring raindrops, is for remote sensing purposes,” Gatlin says. Scaling up accuracy from a small sensor on the ground to large sections of the Earth being observed from space requires very accurately calibrated instruments. “Our ability to correctly depict rainfall using a sensor in space is closely tied to knowing how precipitation varies, right down to the individual raindrop and snowflake size.”

Perfecting ground-level instrument observations, enlarging those to encompass ground-based radar and then going even larger to develop accurate satellite measuring instruments is the best way to reduce error as the area under observation increases. “Before we invest in all this satellite instrumentation,” Gatlin says, “let’s make sure we’ve got it right.”

A coming big step in scaling up precipitation forecasting is NASA’s planned launch of its Global Precipitation Measurement (GPM) satellite toward the end of February. UAH is a mission contractor, headed at the university by Dr. Larry Carey, an associate professor of atmospheric science, and involving UAH Earth System Science Center research scientist Matt Wingo, who is working with NASA at their flight facility in Wallops Island, Va.

“UAH designed the platform for some of the ground-based instruments that will validate the information from the satellite,” says Gatlin.

Carrying an advanced radar/radiometer system to measure precipitation from space, the GPM is the core of what will be a global network of measuring satellites that will provide next-generation global observations of rain and snow. It will serve as a reference standard to unify precipitation measurements from a constellation of research and operational satellites.

Through improved measurements of precipitation globally, the GPM mission will help to advance understanding of Earth's water and energy cycle, improve forecasting of extreme events that cause natural hazards and disasters, and extend current capabilities in using accurate and timely precipitation information.

In his own research, Gatlin has ranged from Iowa and Oklahoma to Canada, Finland, Italy and France. Rather than raindrops, the Canadian research was designed to collect snowflake images in order to improve the accuracy of measuring devices for snowfall.

In each locale, an integrated network of ground-level measuring devices have been deployed, like the Parsivel2, a disdrometer that measures the particle size and velocity of raindrops falling through a laser. Also in use are two-dimensional video disdrometers, which use two video angles to create 2-D pictures that enable determination of raindrop shapes. A video disdrometer on loan from frequent research collaborator Colorado State University is located on the UAH campus behind Cramer Hall.

During a field study, the instruments on the ground take measurements while a plane flies through the clouds to collect actual raindrop information and another flies high above the clouds with remote sensing equipment to mimic satellite radar detection. Results from all the measurement methods are compared.

Enhanced satellite-based precipitation measurements will improve both rainfall and snowfall predictions on a global scale, Gatlin says. “We’ll be measuring rain and snow in some areas where we’ve never measured it before.” The ability to better measure raindrop size also can have impact on severe weather forecasting, as small raindrops lead to higher evaporation rates that have been correlated with larger and more forceful microbursts by UAH’s Dr. Kevin Knupp and others.

Gatlin is about to finish up a global study focusing just on very large raindrops 5 millimeters in size and larger. These drops are difficult to capture in the small measuring area afforded by measuring instruments, and so their observation is rare. Gatlin says out of 224 million drops he has researched, only 8,000 have been 5 mm or larger.

“Even though large raindrops can have the greatest impact on radar measurements, we don’t have a good idea of their concentration,” he says. “What I’ve been doing is bringing together all the raindrop data bases that have collected various types of rainfall data using the same techniques.”

Interestingly, while Sumatra holds the honor of having the greatest number of large drops overall, the largest drop collected in his study fell through a measuring device at the UAH campus. It measured 9.1 mm and was formed in a hailstorm when a falling piece of hail melted before landing.

Patrick Gatlin | Newswise
Further information:

More articles from Earth Sciences:

nachricht Receding glaciers in Bolivia leave communities at risk
20.10.2016 | European Geosciences Union

nachricht UM researchers study vast carbon residue of ocean life
19.10.2016 | University of Miami Rosenstiel School of Marine & Atmospheric Science

All articles from Earth Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: New 3-D wiring technique brings scalable quantum computers closer to reality

Researchers from the Institute for Quantum Computing (IQC) at the University of Waterloo led the development of a new extensible wiring technique capable of controlling superconducting quantum bits, representing a significant step towards to the realization of a scalable quantum computer.

"The quantum socket is a wiring method that uses three-dimensional wires based on spring-loaded pins to address individual qubits," said Jeremy Béjanin, a PhD...

Im Focus: Scientists develop a semiconductor nanocomposite material that moves in response to light

In a paper in Scientific Reports, a research team at Worcester Polytechnic Institute describes a novel light-activated phenomenon that could become the basis for applications as diverse as microscopic robotic grippers and more efficient solar cells.

A research team at Worcester Polytechnic Institute (WPI) has developed a revolutionary, light-activated semiconductor nanocomposite material that can be used...

Im Focus: Diamonds aren't forever: Sandia, Harvard team create first quantum computer bridge

By forcefully embedding two silicon atoms in a diamond matrix, Sandia researchers have demonstrated for the first time on a single chip all the components needed to create a quantum bridge to link quantum computers together.

"People have already built small quantum computers," says Sandia researcher Ryan Camacho. "Maybe the first useful one won't be a single giant quantum computer...

Im Focus: New Products - Highlights of COMPAMED 2016

COMPAMED has become the leading international marketplace for suppliers of medical manufacturing. The trade fair, which takes place every November and is co-located to MEDICA in Dusseldorf, has been steadily growing over the past years and shows that medical technology remains a rapidly growing market.

In 2016, the joint pavilion by the IVAM Microtechnology Network, the Product Market “High-tech for Medical Devices”, will be located in Hall 8a again and will...

Im Focus: Ultra-thin ferroelectric material for next-generation electronics

'Ferroelectric' materials can switch between different states of electrical polarization in response to an external electric field. This flexibility means they show promise for many applications, for example in electronic devices and computer memory. Current ferroelectric materials are highly valued for their thermal and chemical stability and rapid electro-mechanical responses, but creating a material that is scalable down to the tiny sizes needed for technologies like silicon-based semiconductors (Si-based CMOS) has proven challenging.

Now, Hiroshi Funakubo and co-workers at the Tokyo Institute of Technology, in collaboration with researchers across Japan, have conducted experiments to...

All Focus news of the innovation-report >>>



Event News

#IC2S2: When Social Science meets Computer Science - GESIS will host the IC2S2 conference 2017

14.10.2016 | Event News

Agricultural Trade Developments and Potentials in Central Asia and the South Caucasus

14.10.2016 | Event News

World Health Summit – Day Three: A Call to Action

12.10.2016 | Event News

Latest News

Resolving the mystery of preeclampsia

21.10.2016 | Health and Medicine

Stanford researchers create new special-purpose computer that may someday save us billions

21.10.2016 | Information Technology

From ancient fossils to future cars

21.10.2016 | Materials Sciences

More VideoLinks >>>