But these experts have not agreed on the reason these patterns exist. Abrasion causes rocks to grind down and become rounder as they are transported down the river. Does this grinding reduce the size of rocks significantly, or is it that smaller rocks are simply more easily transported downstream?
A new study by the University of Pennsylvania's Douglas Jerolmack, working with mathematicians at Budapest University of Technology and Economics, has found that rocks traveling down a riverbed follow a distinct pattern, first becoming rounder, and then smaller.
Credit: University of Pennsylvania
A new study by the University of Pennsylvania's Douglas Jerolmack, working with mathematicians at Budapest University of Technology and Economics, has arrived at a resolution to this puzzle. Contrary to what many geologists have believed, the team's model suggests that abrasion plays a key role in upholding these patterns, but it does so in a distinctive, two-phase process. First, abrasion makes a rock round. Then, only when the rock is smooth, does abrasion act to make it smaller in diameter.
"It was a rather remarkable and simple result that helps to solve an outstanding problem in geology," Jerolmack said.
Not only does the model help explain the process of erosion and sediment travel in rivers, but it could also help geologists answer questions about a river's history, such as how long it has flowed. Such information is particularly interesting in light of the rounded pebbles recently discovered on Mars — seemingly evidence of a lengthy history of flowing rivers on its surface.
Jerolmack, an associate professor in Penn's Department of Earth and Environmental Science, lent a geologist's perspective to the Hungarian research team, comprised of Gábor Domokos, András Sipos and Ákos Török.
Their work is to be published in the journal PLOS ONE.
Prior to this study, most geologists did not believe that abrasion could be the dominant force responsible for the gradient of rock size in rivers because experimental evidence pointed to it being too slow a process to explain observed patterns. Instead, they pointed to size-selective transport as the explanation for the pattern: small rocks being more easily transported downstream.
The Budapest University researchers, however, approached the question of how rocks become round purely as a geometrical problem, not a geological one. The mathematical model they conceived formalizes the notion, which may seem intuitive, that sharp corners and protruding parts of a rock will wear down faster than parts that protrude less.
The equation they conceived relates the erosion rate of any surface of a pebble with the curvature of the pebble. According to their model, areas of high curvature erode quickly, and areas of zero or negative curvature do not erode at all.
The math that undergirds their explanation for how pebbles become smooth is similar to the equation that explains how heat flows in a given space; both are problems of diffusion.
"Our paper explains the geometrical evolution of pebble shapes," said Domokos, "and associated geological observations, based on an analogy with an equation that describes the variation of temperature in space and time. In our analogy, temperature corresponds to geometric (or Gaussian) curvature. The mathematical root of our paper is the pioneering work of mathematician Richard Hamilton on the Gauss curvature flow."
From this geometric model comes the novel prediction that abrasion of rocks should occur in two phases. In the first phase, protruding areas are worn down without any change in the diameter of the pebble. In the second phase, the pebble begins to shrink.
"If you start out with a rock shaped like a cube, for example," Jerolmack said, "and start banging it into a wall, the model predicts that under almost any scenario that the rock will erode to a sphere with a diameter exactly as long as one of the cube's sides. Only once it becomes a perfect sphere will it then begin to reduce in diameter."
The research team also completed an experiment to confirm their model, taking a cube of sandstone and placing it in a tumbler and monitoring its shape as it eroded.
"The shape evolved exactly as the model predicted," Jerolmack said.
The finding has a number of implications for geologic questions. One is that rocks can lose a significant amount of their mass before their diameter starts to shrink. Yet geologists typically measure river rock size by diameter, not weight.
"If all we're doing in the field is measuring diameter, then we're missing the whole part of shape evolution that can occur without any change in diameter," Jerolmack said. "We're underestimating the importance of abrasion because we're not measuring enough about the pebble."
As a result, Jerolmack noted that geologists may also have been underestimating how much sand and silt arises because of abrasion, the material ground off of the rocks that travel downstream.
"The fine particles that are produced by abrasion are the things that go into producing the floodplain downstream in the river; it's the sand that gets deposited on the beach; it's the mud that gets deposited in the estuary," he said.
With this new understanding of how the process of abrasion proceeds, researchers can address other questions about river flow — both here on Earth and elsewhere, such as on Mars, where NASA's rover Curiosity recently discovered rounded pebbles indicative of ancient river flow.
"If you pluck a pebble out of a riverbed," Jerolmack said, "a question you might like to answer, how far has this pebble traveled? And how long has it taken to reach this place?"
Such questions are among those that Jerolmack and colleagues are now asking.
"If we know something about a rock's initial shape, we can model how it went from its initial shape to the current one," he said. "On Mars, we've seen evidence of river channels, but what everyone wants to know is, was Mars warm and wet for a long time, such that you could have had life? If I can say how long it took for this pebble to grind down to this shape, I can put a constraint on how long Mars needed to have stable liquid water on the surface."
The research was supported by the Hungarian Scientific Research Fund and the National Science Foundation.
Katherine Unger Baillie | EurekAlert!
Giant see-saw of monsoon rains detected
26.09.2016 | Potsdam-Institut für Klimafolgenforschung
A new 3D viewer for improved digital geoscience mapping
20.09.2016 | Uni Research
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.
K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...
23.09.2016 | Event News
20.09.2016 | Event News
16.09.2016 | Event News
26.09.2016 | Physics and Astronomy
26.09.2016 | Physics and Astronomy
26.09.2016 | Life Sciences