Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Ocean currents play a role in predicting extent of Arctic sea ice

21.11.2012
Discovery of feedback between sea ice and ocean improves Arctic ice extent forecast.

Each winter, wide swaths of the Arctic Ocean freeze to form sheets of sea ice that spread over millions of square miles. This ice acts as a massive sun visor for the Earth, reflecting solar radiation and shielding the planet from excessive warming.

The Arctic ice cover reaches its peak each year in mid-March, before shrinking with warmer spring temperatures. But over the last three decades, this winter ice cap has shrunk: Its annual maximum reached record lows, according to satellite observations, in 2007 and again in 2011.

Understanding the processes that drive sea-ice formation and advancement can help scientists predict the future extent of Arctic ice coverage — an essential factor in detecting climate fluctuations and change. But existing models vary in their predictions for how sea ice will evolve.

Now researchers at MIT have developed a new method for optimally combining models and observations to accurately simulate the seasonal extent of Arctic sea ice and the ocean circulation beneath. The team applied its synthesis method to produce a simulation of the Labrador Sea, off the southern coast of Greenland, that matched actual satellite and ship-based observations in the area.

Through their model, the researchers identified an interaction between sea ice and ocean currents that is important for determining what’s called “sea ice extent” — where, in winter, winds and ocean currents push newly formed ice into warmer waters, growing the ice sheet. Furthermore, springtime ice melt may form a “bath” of fresh seawater more conducive for ice to survive the following winter.

Accounting for this feedback phenomenon is an important piece in the puzzle to precisely predict sea-ice extent, says Patrick Heimbach, a principal research scientist in MIT’s Department of Earth, Atmospheric and Planetary Sciences.

“Until a few years ago, people thought we might have a seasonal ice-free Arctic by 2050,” Heimbach says. “But recent observations of sustained ice loss make scientists wonder whether this ice-free Arctic might occur much sooner than any models predict … and people want to understand what physical processes are implicated in sea-ice growth and decline.”

Heimbach and former MIT graduate student Ian Fenty, now a postdoc at NASA’s Jet Propulsion Laboratory, will publish a paper, "Hydrographic Preconditioning for Seasonal Sea Ice Anomalies in the Labrador Sea," in the Journal of Physical Oceanography.

An icy forecast

As Arctic temperatures drop each winter, seawater turns to ice — starting as thin, snowflake-like crystals on the ocean surface that gradually accumulate to form larger, pancake-shaped sheets. These ice sheets eventually collide and fuse to create massive ice floes that can span hundreds of miles.

When seawater freezes, it leaches salt, which mixes with deeper waters to create a dense, briny ocean layer. The overlying ice is fresh and light in comparison, with very little salt in its composition. As ice melts in the spring, it creates a freshwater layer on the ocean surface, setting up ideal conditions for sea ice to form the following winter.

Heimbach and Fenty constructed a model to simulate ice cover, thickness and transport in response to atmospheric and ocean circulation. In a novel approach, they developed a method known in computational science and engineering as “optimal state and parameter estimation” to plug in a variety of observations to improve the simulations.

A tight fit

The researchers tested their approach on data originally taken in 1996 and 1997 in the Labrador Sea, an arm of the North Atlantic Ocean that lies between Greenland and Canada. They included satellite observations of ice cover, as well as local readings of wind speed, water and air temperature, and water salinity. The approach produced a tight fit between simulated and observed sea-ice and ocean conditions in the Labrador Sea — a large improvement over existing models.

The optimal synthesis of model and observations revealed not just where ice forms, but also how ocean currents transport ice floes within and between seasons. From its simulations, the team found that, as new ice forms in northern regions of the Arctic, ocean currents push this ice to the south in a process called advection. The ice migrates further south, into unfrozen waters, where it melts, creating a fresh layer of ocean water that eventually insulates more incoming ice from warmer subsurface waters of subtropical Atlantic origin.

Knowing that this model fits with observations suggests to Heimbach that researchers may use the method of model-data synthesis to predict sea-ice growth and transport in the future — a valuable tool for climate scientists, as well as oil and shipping industries.

“The Northwest Passage has for centuries been considered a shortcut shipping route between Asia and North America — if it was navigable,” Heimbach says. “But it’s very difficult to predict. You can just change the wind pattern a bit and push ice, and suddenly it’s closed. So it’s a tricky business, and needs to be better understood.”

Martin Losch, a research scientist at the Alfred Wegener Institute for Polar and Marine Research in Bremerhaven, Germany, says the feedback mechanism identified by the MIT group is important for predicting sea-ice extent on a regional scale.

“The dynamics of climate are complicated and nonlinear, and are due to many different feedback processes,” says Losch, who was not involved with the research. “Identifying these feedbacks and their impact on the system is at the heart of climate research.”

As part of the “Estimating the Circulation and Climate of the Ocean” (ECCO) project, Heimbach and his colleagues are now applying their model to larger regions in the Arctic.

This research was supported in part by the National Science Foundation and NASA.

Written by: Jennifer Chu, MIT News Office

Sarah McDonnell | EurekAlert!
Further information:
http://www.mit.edu

More articles from Earth Sciences:

nachricht Small- and mid-sized cities particularly vulnerable
29.09.2016 | Universität Stuttgart

nachricht Tracking the amount of sea ice from the Greenland ice sheet
28.09.2016 | Ca' Foscari University of Venice

All articles from Earth Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: New welding process joins dissimilar sheets better

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...

Im Focus: First quantum photonic circuit with electrically driven light source

Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.

Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

HLF: From an experiment to an establishment

29.09.2016 | Event News

European Health Forum Gastein 2016 kicks off today

28.09.2016 | Event News

Laser use for neurosurgery and biofabrication - LaserForum 2016 focuses on medical technology

27.09.2016 | Event News

 
Latest News

New Multiferroic Materials from Building Blocks

29.09.2016 | Materials Sciences

Silicon Fluorescent Material Developed Enabling Observations under a Bright “Biological Optical Window”

29.09.2016 | Materials Sciences

X-shape Bio-inspired Structures

29.09.2016 | Interdisciplinary Research

VideoLinks
B2B-VideoLinks
More VideoLinks >>>