The Australian Bureau of Meteorology (ABOM) has posted cyclone warnings and a yellow and blue alert for Western Australia as Rusty approaches for a landfall. A Cyclone Warning is in effect from Broome to Mardie, and adjacent inland areas of the Pilbara, including Marble Bar, Nullagine and Millstream. A Cyclone Watch is in effect for adjacent inland areas of the Pilbara including Tom Price, Newman and Telfer.
On Feb. 25 at 0215 UTC (9:15 p.m. EST, Feb. 24) the MODIS instrument aboard NASA's Terra satellite captured this visible image of Cyclone Rusty closing in on the northwestern coast of Western Australia. Rusty's outer band of thunderstorms stretched from Broome to Port Hedland. Credit: NASA Goddard MODIS Rapid Response Team
A Yellow Alert is in effect for communities between Wallal and Whim Creek, including Pardoo, De Grey and Port Hedland. ABOM has also issued a Blue Alert for communities between Broome and Wallal including Broome and Bidyadanga, between Whim Creek and Mardie, including Karratha and extending to adjacent inland areas including Marble Bar, Nullagine and Millstream.
On Sunday, Feb. 24, soon after Rusty formed warnings were already being posted. At 1200 UTC (7 a.m. EST) on Feb. 24, Rusty's maximum sustained winds had quickly climbed to near 60 knots (69 mph/111 kph). Rusty's center was located near 17.7 south and 118.3 east, about 160 nautical miles from Port Hedland, Australia and was slowly moving to the south-southwest
Microwave satellite data on Feb. 24 showed that Rusty was consolidating rapidly and had already developed a 20-nautical mile wide eye despite being a tropical storm.
On Feb. 25 at 0215 UTC (9:15 p.m. EST, Feb. 24) the Moderate Resolution Imaging Spectroradiometer (MODIS) instrument aboard NASA's Terra satellite captured a visible image of Cyclone Rusty closing in on the northwestern coast of Western Australia. Rusty's outer band of thunderstorms stretched from Broome to Port Hedland. Satellite data showed that the bands of thunderstorms have intensified and are wrapping more tightly into the low level circulation canter than they did 24 hours prior.
On Feb. 25 at 0900 UTC (4 a.m. EST/ 5 p.m. local time WST), Cyclone Rusty's maximum sustained winds were near 65 knots (74.8 mph/120.4 kph). Rusty was located near 18.4 south latitude and 119.0 east longitude and moving to the southeast at 5 knots (5.7 mph/9.2 kph). At 1500 UTC (10 a.m. EST/11:00 p.m. WST local time) Tropical Cyclone Rusty was estimated to be 210 kilometers north northeast of Port Hedland, according to the Australian Bureau of Meteorology. Forecasters at the Joint Typhoon Warning Center caution that Rusty is expected to intensify quickly over the next day because of warm waters and low wind shear.
Rusty is a large tropical cyclone and its slow movement is likely to result in higher than usual rainfall in the Pilbara and western Kimberley coasts. Because of the storm's slow track, heavy rainfall and flooding are likely over the next couple of days. Very rough surf, high waves and coastal erosion are also likely as Rusty slowly heads for landfall. For updated warnings, watches and alerts from the ABOM, visit: http://www.bom.gov.au/australia/warnings/index.shtml.
The Joint Typhoon Warning Center now projects that landfall will occur sometime near 1800 UTC (1 p.m. EST/U.S.) on Feb. 26 or 2 a.m. WST local time on Feb. 27, just east of Port Hedland.Text Credit: Rob Gutro
Rob Gutro | EurekAlert!
Further reports about: > Australian workers > Cyclone > Cyclone Rusty > Goddard Space Flight Center > Joint Typhoon Warning Center > Marble Bar > Meteorology > Millstream > NASA > NASA's Terra satellite > Typhoon > Typhoon Warning > Typhoon Warning Center > UTC > coastal erosion > cyclone warnings > satellite data > tropical cyclone > tropical diseases
Receding glaciers in Bolivia leave communities at risk
20.10.2016 | European Geosciences Union
UM researchers study vast carbon residue of ocean life
19.10.2016 | University of Miami Rosenstiel School of Marine & Atmospheric Science
Researchers from the Institute for Quantum Computing (IQC) at the University of Waterloo led the development of a new extensible wiring technique capable of controlling superconducting quantum bits, representing a significant step towards to the realization of a scalable quantum computer.
"The quantum socket is a wiring method that uses three-dimensional wires based on spring-loaded pins to address individual qubits," said Jeremy Béjanin, a PhD...
In a paper in Scientific Reports, a research team at Worcester Polytechnic Institute describes a novel light-activated phenomenon that could become the basis for applications as diverse as microscopic robotic grippers and more efficient solar cells.
A research team at Worcester Polytechnic Institute (WPI) has developed a revolutionary, light-activated semiconductor nanocomposite material that can be used...
By forcefully embedding two silicon atoms in a diamond matrix, Sandia researchers have demonstrated for the first time on a single chip all the components needed to create a quantum bridge to link quantum computers together.
"People have already built small quantum computers," says Sandia researcher Ryan Camacho. "Maybe the first useful one won't be a single giant quantum computer...
COMPAMED has become the leading international marketplace for suppliers of medical manufacturing. The trade fair, which takes place every November and is co-located to MEDICA in Dusseldorf, has been steadily growing over the past years and shows that medical technology remains a rapidly growing market.
In 2016, the joint pavilion by the IVAM Microtechnology Network, the Product Market “High-tech for Medical Devices”, will be located in Hall 8a again and will...
'Ferroelectric' materials can switch between different states of electrical polarization in response to an external electric field. This flexibility means they show promise for many applications, for example in electronic devices and computer memory. Current ferroelectric materials are highly valued for their thermal and chemical stability and rapid electro-mechanical responses, but creating a material that is scalable down to the tiny sizes needed for technologies like silicon-based semiconductors (Si-based CMOS) has proven challenging.
Now, Hiroshi Funakubo and co-workers at the Tokyo Institute of Technology, in collaboration with researchers across Japan, have conducted experiments to...
14.10.2016 | Event News
14.10.2016 | Event News
12.10.2016 | Event News
21.10.2016 | Health and Medicine
21.10.2016 | Information Technology
21.10.2016 | Materials Sciences