In communities across the U.S., people are hearing more and more about a controversial oil and gas extraction technique called hydraulic fracturing – aka, hydro-fracking. Controversies pivot on some basic questions: Can hydro-fracking contaminate domestic wells? Does it cause earthquakes? How can we know? What can be done about these things if they are true? A wide range of researchers will address these and related critical questions at the GSA Annual Meeting this week.
"When people talk about contamination from hydraulic fracturing, for instance, they can mean a lot of different things," says hydrogeologist Harvey Cohen of S.S. Papadopulos & Associates in Bethesda, Maryland. "When it's what's happening near their homes, they can mean trucks, drilling machinery, noise." These activities can potentially lead to surface water or groundwater contamination if there are, for example, accidental fuel spills. People also worry about fracking fluids leaking into the aquifers they tap for domestic or municipal water.
On the other hand, when petroleum companies talk about risks to groundwater from hydro-fracking, they are often specifically referring to the process of injecting fluids into geologic units deep underground and fracturing the rock to free the oil and gas it contains, says Cohen. This is a much smaller, much more isolated part of the whole hydraulic fracturing operation. It does not include the surface operations -- or the re-injection of the fracking waste fluids at depth in other wells, which is itself another source of concern for many.
But all of these concerns can be addressed, says Cohen, who will be presenting his talk on groundwater contamination and fracking on the morning of Wednesday, 7 Nov. For instance, it has been proposed that drillers put non-toxic chemical tracers into their fracking fluids so that if a nearby domestic well is contaminated, that tracer will show up in the well water. That would sort out whether the well is contaminated from the hydro-fracking operations or perhaps from some other source, like a leaking underground storage tank or surface contaminants getting into the groundwater.
"That would be the 100 percent confident solution," says Cohen of the tracers.
Another important strategy is for concerned citizens, cities, and even oil companies to gather baseline data on water quality from wells before hydro-fracking begins. Baseline data would have been very helpful, for example, in the case of the Pavillion gas field the Wind River Formation of Wyoming, according to Cohen, because there are multiple potential sources of contaminants that have been found in domestic wells there. The Pavillion field is just one of multiple sites now being studied by the U.S. Environmental Protection Agency (EPA) to learn about past and future effects of hydro-fracking on groundwater.
The same pre-fracking science approach is being taken in some areas to evaluate the seismic effects of disposing of fracking fluids by injecting them deep underground. In Ohio and Texas, this disposal method has been the prime suspect in the recent activation of old, dormant faults that have generated clusters of low intensity earthquakes. So in North Carolina, as well as other places where fracking has been proposed, some scientists are scrambling to gather as much pre-fracking seismic data as possible.
Potentially newsworthy hydro-fracking presentations and sessions will run throughout the meeting, include the following:
MONDAYPaper No. 125-7
To identify presentations in specific areas of interest, search topical sessions by discipline categories or sponsors using the drop-down menus at www.geosociety.org/meetings/2012/sessions/topical.asp, or use your browser's "find" feature to search for keywords or convener names.
Representatives of the media and public information officers from universities, government agencies, and research institutions, may participate in technical sessions, field trips, and other special events. Eligible media personnel will receive complimentary registration and are invited to use GSA's newsroom facilities while at the meeting. Journalists and PIOs must pay for any short courses or field trips in which they wish to participate.
For information on media eligibility, go to www.geosociety.org/meetings/2012/media.htm. Media personnel may register onsite in the GSA Newsroom (room 204) at the Charlotte Convention Center. Wireless Internet access and a quiet space for interviews will be provided in the newsroom, along with beverages and light snacks throughout the day.
Newsroom Hours of OperationSaturday, 3 Nov., 3 p.m. to 5 p.m.
Contact Christa Stratton, GSA Director of Communications & Marketing, for additional information and assistance.
Tracking the amount of sea ice from the Greenland ice sheet
28.09.2016 | Ca' Foscari University of Venice
A perfect sun-storm
28.09.2016 | Helmholtz-Zentrum Potsdam - Deutsches GeoForschungsZentrum GFZ
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
28.09.2016 | Event News
27.09.2016 | Event News
23.09.2016 | Event News
28.09.2016 | Medical Engineering
28.09.2016 | Materials Sciences
28.09.2016 | Business and Finance