Optical fiber communication is the backbone for the telecommunications infrastructure that supports the Internet. Fueled by emerging bandwidth-hungry applications and increases in computer processing power, Internet traffic has sustained exponential growth and this trend is expected to continue for the foreseeable future.
To highlight research being carried out to ensure that the capacity of fiber optic communication systems can handle this rapidly increasing demand, and thus to address the Internet capacity crunch, the editors of the Optical Society's (OSA) open-access journal Optics Express, today published a special Focus Issue on Space Multiplexed Optical Transmission. The issue is organized and edited by Guifang Li of the University of Central Florida and Xiang Liu of Bell Labs, Alcatel-Lucent.
The Focus Issue describes different approaches to increase the information carrying capacity of optical fibers. One of these, Space-Division Multiplexing (SDM), uses fibers with seven cores, rather than a single one. By using all seven cores, seven independent signals can be carried, and the fiber capacity can thus, in principle, be increased seven-fold. In other approaches, such as Mode-Division Multiplexing (MDM) a single core carries multiple information channels, each of which is associated with a different physical shape of the light field, also increasing the fiber capacity.
According to Liu, "Our goal in producing this focus issue was to provide a comprehensive survey of the state-of-the-art research activities in multiplexed transmission, which holds potential for addressing the challenges of capacity growth in optical communications."
"We hope this collection will stimulate future research on this subject to address the remaining fundamental and practical challenges, potentially enabling dramatic capacity growth in future optical communication systems," said Li.
It is well known that the capacity of a communication channel is constrained by the Shannon limit. In optical fiber communication, fiber nonlinearity imposes an additional limit in the high power or high signal-to-noise ratio (SNR) regime. Digital coherent detection increases optical signal tolerance to linear noise such as amplified spontaneous emission noise, and sometimes nonlinear phase noise. However, the single-channel capacity increase scales logarithmically with the increase in SNR. This logarithmical single-channel capacity scaling ultimately will not be able to support exponential traffic growth. While it might be impossible to provide exponential single-channel capacity growth in optical communication, multiplicative growth in optical communication capacity has satisfied traffic demand in the past, especially when dense wavelength-division multiplexing (DWDM) with a multiplicative factor on the order of 100 was invented. As today's DWDM coherent optical communication technology has already taken advantage of all degrees of freedom of a light wave in a single-mode fiber, namely frequency, polarization, amplitude, and phase, further multiplicative growth has to explore new degrees of freedom. MDM using few-mode fibers (FMF) and SDM using multi-core fibers (MCF) have emerged as promising candidates for the next multiplicative capacity growth for optical communication. This Optics Express Focus Issue features the state-of-the-art research activities in MDM and SDM aimed at order-of-magnitude capacity growth in future optical communication systems.
The following papers are some of the highlights of the Optics Express Focus Issue on Space Multiplexed Optical Transmission. All are included in Volume 19, issue 17 and can be accessed online at http://www.opticsinfobase.org/oe.
A paper from B. Zhu et al. of OFS Labs and Bell Labs reports a transmission capacity of 112 Tb/s over a distance of 76.8-km using SDM in a 7-core fiber using SDM and DWDM in the C and L bands. Each of the 7 cores carried 160 polarization-division multiplexed quadrature phase-shift keying (PDM-QPSK) channels at 107-Gb/s on a 50-GHz grid, resulting in an aggregate spectral efficiency of 14 b/s/Hz. The impact of the inter-core crosstalk was experimentally investigated and the system implications of core-to-core crosstalk on long-haul transmission were discussed. pp. 16665-16671 (http://www.opticsinfobase.org/oe/abstract.cfm?uri=oe-19-17-16665)
T. Hayashi et al. from Sumitomo Electric Industries report an ultra-low-crosstalk MCF that is suitable for ultra-long-haul transmission. A remarkably low inter-core crosstalk level of below -62 dB was achieved in a 17.4-km 7-core fiber, by using a trench-assisted index profile. A transmission capacity of 109 Tb/s was recently demonstrated by using SDM and DWDM with this ultra-low-crosstalk MCF. pp. 16576-16592 (http://www.opticsinfobase.org/oe/abstract.cfm?uri=oe-19-17-16576)
S. Randel et al. from Bell Labs and OFS labs present the transmission of three 112-Gb/s PDM-QPSK signals over the fundamental mode (LP01) and two orthogonal LP11 modes of a 33-km FMF. 6x6 MIMO processing was used to achieve the separation of the three spatial modes and the two polarizations of the transmitted signals. These experiments show the feasibility of scaling capacity using MDM in FMF in combination with MIMO signal processing. pp. 16697-16707 (http://www.opticsinfobase.org/oe/abstract.cfm?uri=oe-19-17-16697)
K. S. Abedin et al. from OFS Labs have demonstrated a multicore Erbium-doped fiber (MC-EDF) amplifier for simultaneous amplification in its 7 cores. The pump and signal were coupled to individual cores of the MC-EDF using two tapered fiber bundled (TFB) couplers. The average gain achieved in the MC-EDF amplifier was 30 dB, and noise figure was less than 4 dB. pp. 16715-16721 (http://www.opticsinfobase.org/oe/abstract.cfm?uri=oe-19-17-16715)
About Optics Express
Optics Express reports on new developments in all fields of optical science and technology every two weeks. The journal provides rapid publication of original, peer-reviewed papers. It is published by the Optical Society and edited by C. Martijn de Sterke of the University of Sydney. Optics Express is an open-access journal and is available at no cost to readers online at http://www.OpticsInfoBase.org/OE.
Uniting more than 106,000 professionals from 134 countries, the Optical Society (OSA) brings together the global optics community through its programs and initiatives. Since 1916 OSA has worked to advance the common interests of the field, providing educational resources to the scientists, engineers and business leaders who work in the field by promoting the science of light and the advanced technologies made possible by optics and photonics. OSA publications, events, technical groups and programs foster optics knowledge and scientific collaboration among all those with an interest in optics and photonics.
Angela Stark | EurekAlert!
Product placement: Only brands placed very prominently benefit from 3D technology
07.07.2016 | Alpen-Adria-Universität Klagenfurt
NASA Goddard network maintains communications from space to ground
02.03.2016 | NASA/Goddard Space Flight Center
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.
K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...
23.09.2016 | Event News
20.09.2016 | Event News
16.09.2016 | Event News
26.09.2016 | Health and Medicine
26.09.2016 | Power and Electrical Engineering
23.09.2016 | Life Sciences